Author Topic: L0rdNiC0s tutorial for the Sound Reactive LED Mod for the Slim (Read 145377 times)

VoX · « **Reply #60 on:** May 25, 2008, 02:12:52 AM »

You have no problems as that is how the mod works

alexandercyle · « **Reply #61 on:** May 26, 2008, 11:43:32 PM »

at first i looked cause vox was the last poster but now after reading wtf are you serious its called the "sound reactive led mod" and this isnt perfected but dee dee fing duh

:D:D

Cratos · « **Reply #62 on:** June 01, 2008, 02:59:15 PM »

you could as long as it in series and not parallel

rooker · « **Reply #63 on:** June 27, 2008, 04:24:23 AM »

just wanna ask if you know how to make led mod sound reactive on the audio output so that every time i use headset it will glow, unlike the sound reactive connected directly on d speaker itself, coz most of the time i use headset sometimes i use 2.1 speaker. tnx

jake the noob · « **Reply #64 on:** July 01, 2008, 12:00:13 PM »

ok can someone plz tell me why there is no tutorial for a non sound reactive led mod? (psp slim) tht would be nice cuz i dont care for the sound reactive i want it on all the time...so yea its kinda dumb tht all you smart guy cant make the simple one and if you think you can let me know plz ..thx

rooker · « **Reply #65 on:** July 07, 2008, 10:20:29 PM »

you just have 2 look for any supply between 3-5v on the board, if you use 5 volts use 40 ohm resistor , 3v no need to put resistor, you can find the power points at the power switch , tnx

ReZiN_420 · « **Reply #66 on:** July 08, 2008, 08:53:11 PM »

Very impressive, definitely making this my next mod as soon as i get this dual nub finished up. CHEERS!

perrymods · « **Reply #67 on:** July 09, 2008, 01:48:01 PM »

Thanks to you lordnico for the tutorial i made a perfect sound blinking light to my slim psp and now my psp is more attractive to my customer thanks bro.....

perrymods · « **Reply #68 on:** July 10, 2008, 08:28:10 AM »

this is my finish product of PSP sound reactive LED Mod for slim and have speaker.

http://www.youtube.com/watch?v=ryxQczEdyxo

and this

http://www.youtube.com/watch?v=PWxoYeDTVro&feature=related

pax · « **Reply #69 on:** July 10, 2008, 08:35:43 AM »

Quote from: perrymods on July 10, 2008, 08:28:10 AM

this is my finish product of PSP sound reactive LED Mod for slim and have speaker.

<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/PWxoYeDTVro"> </param> <embed src="http://www.youtube.com/v/PWxoYeDTVro" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>

to embed the youtube video simply hyperlink it using the hyperlink button
perrymods psp
http://www.youtube.com/v/PWxoYeDTVro

WhiteFlame. · « **Reply #70 on:** July 19, 2008, 01:03:04 PM »

Thx for the tut, could u posiby tell me where it would be best to get a switchto turn it on nd off

rojs · « **Reply #71 on:** July 26, 2008, 09:15:13 PM »

Thanks fot the tut.. It really help me on my modding..

Matinho · « **Reply #72 on:** August 13, 2008, 01:04:08 AM »

Perrymods, doesn't your memory stick led work?

sethion · « **Reply #73 on:** August 20, 2008, 08:08:42 AM »

Im guessing from how many wires there are this isnt going to be that simple right ?

PspKicks316 · « **Reply #74 on:** August 20, 2008, 08:39:38 AM »

Quote from: sethion on August 20, 2008, 08:08:42 AM

Im guessing from how many wires there are this isnt going to be that simple right ?

It is simple. I haven't done it to a slim but I've done it to other things. It's not that bad. If you're a noob at soldering/modding I couldn't recommend it as your first mod though.

red_eye · « **Reply #75 on:** September 06, 2008, 08:52:50 PM »

im still a noob at doing this so would i be able to do a trigger mod just by wireing a led to the speaker itself or would i need to solder a led to the speaker?

ApheX · « **Reply #76 on:** September 07, 2008, 05:59:11 AM »

yes, i personaly recommend doing that first. it gives you an idea as to how the psp is built and where other mods are placed. helpful info to know for the next time you mod the psp with something a little more demanding. make sure that you use very thin wire as the speakers will have to fit on top.

jordanlp · « **Reply #77 on:** October 09, 2008, 04:28:25 PM »

CCCCCCCCCCCCCCOOOOOOOOOOOOOLLLLLLLLLLLLLL!

rhadamanthys · « **Reply #78 on:** October 12, 2008, 03:25:32 AM »

Quote

Supplies needed for the Sound Reactive LED Mod
30-gauge Kynar wire (best to have different colors)
2x 0603 LED’s
1x 191k-ohm Resistor
1x 30k-ohn Resistor
1x LM386 Audio Amplifier IC
Soldering Iron (nothing more then 15 Watt)
Solder (.015 size works best)
Flux
Drill
3/16 bit

could anybody tell me which onlineshop sell those items?? it would be better if someone could give the exact links (example LED link, Kynar Wire link, etc)

coz i'm still newbie to this mod/soldering stuff, so i cant decide which is 0603 LED and the difference with other LED

thx for the help

FireFox · « **Reply #79 on:** October 12, 2008, 04:20:07 AM »

www.phenoptix.com

rhadamanthys · « **Reply #80 on:** October 12, 2008, 07:24:28 AM »

Quote from: FireFox on October 12, 2008, 04:20:07 AM

www.phenoptix.com

thx for da info

ApheX · « **Reply #81 on:** October 19, 2008, 03:27:07 AM »

Quote from: perrymods on July 10, 2008, 08:28:10 AM

this is my finish product of PSP sound reactive LED Mod for slim and have speaker.

http://www.youtube.com/watch?v=ryxQczEdyxo

and this

http://www.youtube.com/watch?v=PWxoYeDTVro&feature=related

Nice looking psps mate!

haloed · « **Reply #82 on:** December 06, 2008, 09:18:06 AM »

I just bought all of the parts needed and I am about to do this mod but how do you build the Amp? JrF's Sound Mod tut is down.. or the wiki..

EDIT #1Nevermind I found a diagram.

EDIT #2 I Installed everything but when I turned my PSP on the LEDs Blew so I Need Help.
My LEDs are 1.8~2.4v so what kind of resistor would I Need so that they don't blow up?

armis · « **Reply #83 on:** December 13, 2008, 12:30:47 PM »

so the 3rd pin on the right goes to power source (but how i find it tho)
4th pin goes to .....what are those....? LEDs?
another question left 4th pin is negative or positive? and right 4th pin is negative or positive? im confused

Pwng ninja · « **Reply #84 on:** January 04, 2009, 08:07:44 PM »

complete genius man luv

it, i got the sound chip from "the shop" and i did everything exactly as you have here. it works perfectly and i have one orange 0603 led on the contacts but it eventually burned out.i burned out the resistors to my wifi and memory stick indicator lights(sound chip still works) but im cool with that cause they ruin the flow im trying to make. i want to install 6 blue leds and 2 white ones. i would like to know what resistors i would need for the colors im using and whether its better to wire them in series or parallel. i tested a couple of white ones and the popped so i know i need them. id really like to finish this thing cause all my media is centered around music and my psp slim. any help would be greatly appreciated.

Pwng ninja · « **Reply #85 on:** January 06, 2009, 04:20:20 PM »

does the sound mod rob more battery power if the resistors leading to the wifi and memory stick leds are burnt, my psp slim seems less durable and i havent installed the leds yet for the nod,i keep it off but i got it closed up n all

jay_88888 · « **Reply #86 on:** January 09, 2009, 05:35:46 AM »

ah guys can anyone help me here,, hmm.. i wonder where i can get tutorial in installing trigger LEDs,, i cant access the link to chaos trigger LED,, think the link is broken

TeaBubblez · « **Reply #87 on:** January 24, 2009, 09:33:39 AM »

yea the two other links provided. i can only see the banner of acidmods. duno y

bustinthejustin · « **Reply #88 on:** January 25, 2009, 03:08:30 PM »

The links are to the wiki, which no longer exists. All tuts and entries and stuff were moved to the tutorials section.

jrf tut

https://www.acidmods.com/forum/index.php?topic=13477.0

Trigger mod

https://www.acidmods.com/forum/index.php?topic=18429.0

disassembly tut

https://www.acidmods.com/forum/index.php?topic=13475.0

TeaBubblez · « **Reply #89 on:** January 25, 2009, 04:53:07 PM »

k i have 2 questions.

1) what is the importance of using two different color kynar wires?
2) which type of resistors do i get? copper or metal

News:

Author Topic: L0rdNiC0s tutorial for the Sound Reactive LED Mod for the Slim (Read 145377 times)

VoX