Author Topic: PSP Laptop model .5  (Read 99384 times)

Offline folklord36

  • Research & Development
  • Acid Modder
  • *
  • Posts: 810
  • Post quality +0/-0
  • Gender: Male
PSP Laptop model .5
« on: June 01, 2009, 08:40:35 PM »
Ok this is the PSP laptop .5 this is also a work in progress and I have some cleaning up to do and a few additions. This is the main body assembly and how the completed version will look. Let me know what you guys think :tup: .





The LCD has an extended FFC so it dosent have the whole big FPC hanging out and exposed and being bent around. The normal PSP speakers were relocated to the big holes and covered up with the material from headphones.





The top is a joytech visor only cost 10 bucks and has the same finish as a PSP so it all matches. It has a ridgid hinge that can bend to any angle up to 180 degrees. It also spins so I put a dab of glue too keep it from spinning but still fold.








Well im about to pass out video up tomorrow all comments welcome.


Offline MARIOPARTY53

  • I DONT FAIL
  • BANNED
  • E = MC² Mad Scientist
  • *
  • Posts: 1526
  • Post quality +0/-0
  • Gender: Male
  • Pc Gaming Rules
Re: PSP Laptop model .5
« Reply #1 on: June 01, 2009, 08:43:51 PM »
First Post

Dam thats sick, nice job! Its alot bettter then the other, man nice work, bravo!!!
However today I was brutally raped by a door handle, and none of my friends helped me up off the floor after ten minutes, instead they all teabaged me, all 10 of them...

Offline EliteGamer83

  • Millennium Poster
  • *
  • Posts: 1233
  • Post quality +0/-0
  • Gender: Male
  • Trusted Seller! Slim Modder! Graphics Artist!
Re: PSP Laptop model .5
« Reply #2 on: June 01, 2009, 08:46:05 PM »
Heh I saw it first on webcam though :tup:

great job!

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: PSP Laptop model .5
« Reply #3 on: June 01, 2009, 08:47:31 PM »
good job really improved on it looks great

PINOY AKO

Offline Slim Hacker

  • Mr PS3
  • Millennium Poster
  • *
  • Posts: 1140
  • Post quality +0/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #4 on: June 01, 2009, 08:48:55 PM »
Nice

Looks thick tho

Quote from: Jumbo
I herd you like stealing quotes ey?

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #5 on: June 01, 2009, 08:52:59 PM »
That's awesome man! Where'd you find the FPC extender? And how does the keyboard work?

Sig by Kenshinffx - Thanks!

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: PSP Laptop model .5
« Reply #6 on: June 01, 2009, 08:53:49 PM »
Let me know what you guys think :tup: .
I think somebody deserves some serious R&D status.

Offline folklord36

  • Research & Development
  • Acid Modder
  • *
  • Posts: 810
  • Post quality +0/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #7 on: June 01, 2009, 09:05:41 PM »
That's awesome man! Where'd you find the FPC extender? And how does the keyboard work?

Keyboard is fully functional read about it over at PS2dev.org Nico also helped make it work on slim and there is a post here about it too. The FFC is from a sony DVD, CD burner drive from a dell dimension 2350.


I think somebody deserves some serious R&D status.


That would be nice :cry2: I miss my Advanced R&D status.
« Last Edit: June 01, 2009, 09:27:48 PM by folklord36 »

Offline l0rdnic0

  • 2%
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1836
  • Post quality +8/-0
  • Gender: Male
  • TeamCYBER

Re: PSP Laptop model .5
« Reply #8 on: June 01, 2009, 09:25:17 PM »
Wow, I like it... You have done a great job with that PROPS TO YOU!!!!  :#1:


L0rdNiC0 Pioneering Mods on the PSP Slim :taunt:
Sound Mod, Button LED Mod, Security Mod, Dual NUB, Mode Select Switch + More

Offline ~:Dhruv:~

  • Millennium Poster
  • *
  • Posts: 1321
  • Post quality +0/-0
  • Gender: Male
  • [quote author=Reaper link=topic=30647.msg227184#ms
    • Infectech
Re: PSP Laptop model .5
« Reply #9 on: June 01, 2009, 09:51:22 PM »
lukin awesome !!! though it aint much o a portable now with so much thickness :)
  you look like a carrot.
My nickname at school is carrot cake, because i can't get tan. I get orange. and my face is shaped like a carrot. And i make a mean carrot cake.

Offline folklord36

  • Research & Development
  • Acid Modder
  • *
  • Posts: 810
  • Post quality +0/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #10 on: June 01, 2009, 10:02:47 PM »
Ya its more of a novelty item I don't really carry around any of my other normal psps anyway and I think the built in keyboard and cool flip screen is worth the thickness

Offline ~:Dhruv:~

  • Millennium Poster
  • *
  • Posts: 1321
  • Post quality +0/-0
  • Gender: Male
  • [quote author=Reaper link=topic=30647.msg227184#ms
    • Infectech
Re: PSP Laptop model .5
« Reply #11 on: June 01, 2009, 10:07:29 PM »
it sure is, its a one of a kind collectors item :)
  you look like a carrot.
My nickname at school is carrot cake, because i can't get tan. I get orange. and my face is shaped like a carrot. And i make a mean carrot cake.

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #12 on: June 01, 2009, 11:09:44 PM »
looks awesome. allot better than the old one. cant wait to see the video

Offline Rokujou

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #13 on: June 01, 2009, 11:32:50 PM »
Great Job! :clap:


Offline Tec_

  • EL-Wire King
  • E = MC² Mad Scientist
  • *
  • Posts: 1869
  • Post quality +2/-0
  • Gender: Male
  • EL Wire King
Re: PSP Laptop model .5
« Reply #14 on: June 01, 2009, 11:34:21 PM »
if this is for real this is quite incredible

Offline seraph524

  • Ω Allumnist Ω
  • *
  • Posts: 133
  • Post quality +0/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #15 on: June 02, 2009, 12:48:25 AM »
Pretty awesome


Knew someone would get it lookin good :D

Offline hevitikku

  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #16 on: June 02, 2009, 03:13:02 AM »
Thats gnarly!

Looks much better than the older one.... Waiting for vid.

Offline DarkShot

  • I approve your mom
  • Acid Modder
  • *
  • Posts: 781
  • Post quality +0/-0
  • Gender: Male
  • ÜBERRAPESKILLETS
Re: PSP Laptop model .5
« Reply #17 on: June 02, 2009, 07:04:24 AM »
Well treemty /me thinks we got another mod of the week.

And you should get some form of R&D status, you're helpful and all that jazz.

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: PSP Laptop model .5
« Reply #18 on: June 02, 2009, 08:39:54 AM »
how that ffc works??does it involve soldering?

pics please..nice work buddy..
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline injungleist

  • Club AM VIP
  • Who Farted ???
  • *
  • Posts: 200
  • Post quality +0/-0
  • Gender: Male
  • mod your face off.
Re: PSP Laptop model .5
« Reply #19 on: June 02, 2009, 09:05:04 AM »
that's tight. it must have took a lot of time fitting everything together. cant wait to see it in action.
thx gamerdude767
trades w/ blazinkaos
purchases from sniper (fast shipping)

Offline EliteGamer83

  • Millennium Poster
  • *
  • Posts: 1233
  • Post quality +0/-0
  • Gender: Male
  • Trusted Seller! Slim Modder! Graphics Artist!
Re: PSP Laptop model .5
« Reply #20 on: June 02, 2009, 09:46:41 AM »
No, not exactly.

A FPC stands for Flat Printed Circuit and FFC stands for Flat Flex Cable. They are more or less the same thing. Think of the PSP Innards, the FPC is like what comes out of the LCD, then you connect it to a ZIF (Zero Insertion Force) connector. Which intern then the leads out the back go to wherever assigned. So in a way yes it does require soldering but in a different way then what you specified. 

Offline folklord36

  • Research & Development
  • Acid Modder
  • *
  • Posts: 810
  • Post quality +0/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #21 on: June 02, 2009, 10:10:36 AM »
Yes the FFC requires another 30 pin ZIF connector to be soldered onto the connector where it plugs into the PSP mobo. Its kinda one of those things you only get one shot at if its not soldered on perfect the first time the chances of getting it off for another try is almost imposible with a regular soldering iorn.

Offline W-Gaming5

  • Millennium Poster
  • *
  • Posts: 1129
  • Post quality +1/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #22 on: June 03, 2009, 09:14:46 PM »
Looks really improved :tup:
:censored:

Offline robin1989

  • Site Owner - Site Maintenance & development
  • Administrator
  • Mad Bomber
  • *
  • Posts: 6272
  • Post quality +21/-0
  • Gender: Male
  • Site owner
    • Acidmods
Re: PSP Laptop model .5
« Reply #23 on: June 03, 2009, 11:46:38 PM »
have you done the video yet folklord - im really looking forward to seeing it

i am not responsible for what i do or my advice


Get the iPhone 4s from Three using Quidco and recieve £109 cashback

Offline PhenomenalDesigns

  • Granny Spanker
  • *
  • Posts: 476
  • Post quality +0/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #24 on: June 04, 2009, 07:35:14 AM »
Wow, the keypad does work right? If so, how did you get it to work?


Hoi! Pinoy ako!

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: PSP Laptop model .5
« Reply #25 on: June 04, 2009, 12:12:04 PM »
Wow, the keypad does work right? If so, how did you get it to work?

theres software and a hole discussion avalible on ps2dev.
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline W-Gaming5

  • Millennium Poster
  • *
  • Posts: 1129
  • Post quality +1/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #26 on: June 04, 2009, 12:20:05 PM »
I would be scared the ribbons would break or something 
:censored:

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: PSP Laptop model .5
« Reply #27 on: June 04, 2009, 01:10:22 PM »
also now that I think of it.  Why isn't on the front page?

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #28 on: June 04, 2009, 01:44:16 PM »
A news article has been done. Folklord, if you wish to add anything, or you see any errors in the news article, feel free to PM me. https://www.acidmods.com/news/?p=778

Sig by Kenshinffx - Thanks!

Offline kink192

  • Acid Modder
  • *
  • Posts: 916
  • Post quality +1/-0
  • Gender: Male
Re: PSP Laptop model .5
« Reply #29 on: June 04, 2009, 02:16:43 PM »
why is the one nub lopsided?
It's been a long time

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal