Thats Right I said
"ANALOG" on the right side.. This is not the Razor X. and this design will only be made for the PSP Slim.. This will be analog so when you barly press the sony nub on the right side up it will move the cross hairs slowly as you move the nub up more the cross hairs will pick up speed. You will be poping an un modified Sony analog Nub into the right side of the slim and connect to the chip I invented. Befor I go into details on how it works let me get a few things out in the open...
1: I will not release the blueprints or the code until they are mass produced. This is because of the complexity of the design..
2: it will take months to produce but we will post a poc soon like this weekend.
3: this does not stop the razor x. You should get and enjoy the razor and when this board is ready Upgrading will be simple..
4: Since the complexity of this board Imagesco.com will produce and coolmods will have the option to be a reseller.ok now to the "How it Works" you will buy a sony analog nub and solder wires to the 4 pins on the underside then solder those wires to the board we producethen connect the ribon cables from the psp mobo to the PCB we produce and fit the nub. Of corce there will be some more detailed intructions down the line...
Once installed there will be an true analog nub on the right side like the one on the left side. but it will have a few added featers. you will be able to select diffrent modes by pressing the " ♪ " button for .5 seconds the
First mode: will be analog Face buttons we acomplish this by hijacking the ribon cable and running the analog signal through our microcontroller our software decodes it then feeds the data through the ribon cable directly into the mobo.
Second Mode: will map the D-pad to the right nub and convert that to analog as well. This feature will allow you to customize the psp how you want it. It will also alow home brew developers to further push there technology.
All this will be done thanks to the hard work of our microcontroller modding group and the dedication of our members.. If any one would like to donate to the R&D budget please send to
Sales@acidmods.com all new technologe is researched from money out of our own pockets we get nothing from the people who mass produce it till later and that is a very small percentage and just covers server expences..