Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: SYSTEM aka (Cyberpyrot) on March 30, 2008, 02:04:45 PM

Title: Razor X in Slim By LordNico..
Post by: SYSTEM aka (Cyberpyrot) on March 30, 2008, 02:04:45 PM
Hey all, here is L0rdNic0's PSP Slim with Dual Nubs. The wiring to the header pins is a little hard, but the over all installation is cake. The RazorX adds smooth operation since there are no bubbles of solder or wires to interfere with the spring. We here at AcidMods will be working on a no hassel way of installing the RazorX in the Slim that will include a relocation of the power switch to the Start button using a digital switch as posted in one of my other videos. Keep an eye out. NOTE: This install is 100% fully functioning without any issues.

here is a video of it in action..




Here is a sneek peek of the inside of the slim with the razor X in place.

(https://www.acidmods.com/images/X1.jpg)

Here is the Razor X with the face plate on..

(https://www.acidmods.com/images/X2.jpg)
Title: Re: Razor X in Slim By LordNico..
Post by: anthonyta on March 30, 2008, 02:15:25 PM
clllleeeeaaannnnn omggg im jealous. i dont like the spring though i always end up bending it. check out my balloon one in the dual nub section =]
Title: Re: Razor X in Slim By LordNico..
Post by: Nemesis on March 30, 2008, 02:57:11 PM
awesome, did the charging port have to be removed?
Title: Re: Razor X in Slim By LordNico..
Post by: l0rdnic0 on March 30, 2008, 03:07:19 PM
Special thanks to Cyber for editing my video footage for me.  Hope you guys like the Video and sorry that my PSP trim looks shabby I use that PSP everyday as an MP3 player and TV   :winker:

Details, yes the Charging port needs to be removed and the power board too. At the time of this video recording, I had not installed the electronic switch, but now to turn the PSP on and off you need to hold the start button down for five seconds. Ten seconds to hard boot it, or use a magnet (love the security mod). Some time ago I had done the USB Mod so I didn't have to use Sony's charging method (this was before DAX created a Hack in CFW). Anyway now I can charge my slim even when its powered off so I guess it works out.. BTW the spring is easy to work with, just takes practice.

 :#1:
Title: Re: Razor X in Slim By LordNico..
Post by: MattZani on March 30, 2008, 04:10:07 PM
Ghost in the shell...

Same game the A2D was shown on...

Ahh... Memories.

Anyway, this looks amazing, once you do a ribbon cable version i'll buy.
Title: Re: Razor X in Slim By LordNico..
Post by: noah03ark on March 30, 2008, 07:21:22 PM
holy crap that is aweosme! wonderful work!!!!

theres a psp phat ribbon cable in the works too...right?
Title: Re: Razor X in Slim By LordNico..
Post by: l0rdnic0 on March 30, 2008, 07:41:27 PM
no, no need for a Phat the contact points are easy to solder to. The PSP Slim is a different story but we dont want to give away to many details just yet.
Title: Re: Razor X in Slim By LordNico..
Post by: Skullmaster on March 30, 2008, 08:13:18 PM
Cool! I cant wait for a kit, I dont trust my skills that much to do it on my own :p
Title: Re: Razor X in Slim By LordNico..
Post by: Electro on March 30, 2008, 08:42:44 PM
Nice, good work the installations looks nice and clean.

2 bad I don't wanna mod my Slim
But as for my Fat PSP I might have to do something like this again.
Title: Re: Razor X in Slim By LordNico..
Post by: nez on March 30, 2008, 11:06:06 PM
very clean as normal. i like it a lot but i will wait to see what is to come with the parst taken out. and the PCB Part.
Title: Re: Razor X in Slim By LordNico..
Post by: anthonyta on March 31, 2008, 12:22:39 AM
hey what did you use for the spring cage? it doesn't look like the psp phat's analogue. its a perfect circle
Title: Re: Razor X in Slim By LordNico..
Post by: Siggen on March 31, 2008, 02:02:05 AM
cool, will you sell this mod later? cos i would do it my self on the phat and all, but i dont even want to open my slim (my precious).  Or maybe someone (hobby) professionals in england rather (since i live in norway). I thought i never would want to mod my slim, but you changed my mind Nico :)

but since the mod is not really ready for the public yet suits me okay, cos living on my own is hard enough, need to save up some moneys :cool:
Title: Re: Razor X in Slim By LordNico..
Post by: Luke on March 31, 2008, 04:38:50 AM
can i steal this kids brain so im as smart as him xD
Title: Re: Razor X in Slim By LordNico..
Post by: DubbleDutch on March 31, 2008, 06:07:02 AM
nice l0rdnic0 very nice!!!!!
Title: Re: Razor X in Slim By LordNico..
Post by: ccccpie on March 31, 2008, 01:55:19 PM
can i steal this kids brain so im as smart as him



He isnt exactly a kid :p
Title: Re: Razor X in Slim By LordNico..
Post by: General Vergel on April 01, 2008, 08:36:37 AM
omg so awesome  :clap: :dribble:
Title: Re: Razor X in Slim By LordNico..
Post by: JoblessPunk on April 02, 2008, 07:50:57 AM
dude!
thats sooo freakin cool!

I have a question,
On your site to buy it:
http://www.coolmods.co.uk/catalog/product_info.php?products_id=190&osCsid=1ed4d6494fd8cc645f77b4e84be23425 (http://www.coolmods.co.uk/catalog/product_info.php?products_id=190&osCsid=1ed4d6494fd8cc645f77b4e84be23425)

is that the kit for the PSP Slim?
and does that "kit" come with everything you will need + instructions?

Thanks!
JoblessPunk
Title: Re: Razor X in Slim By LordNico..
Post by: drchronic on April 03, 2008, 12:09:28 AM
Truly amazing... how much do you think the kit will cost when you are getting the pcb manufactured? When this comes out it will make me finally fork over some $$$ for a slim. KUDOS!!!!!
Title: Re: Razor X in Slim By LordNico..
Post by: robin1989 on April 03, 2008, 03:24:33 AM
Truly amazing... how much do you think the kit will cost when you are getting the pcb manufactured? When this comes out it will make me finally fork over some $$$ for a slim. KUDOS!!!!!
the actual razor x board is already released at www.coomods.co.uk (http://www.coomods.co.uk) were just waiting on creating a tutorial for people if they need it
Title: Re: Razor X in Slim By LordNico..
Post by: MattZani on April 03, 2008, 05:04:04 AM
dude!
thats sooo freakin cool!

I have a question,
On your site to buy it:
http://www.coolmods.co.uk/catalog/product_info.php?products_id=190&osCsid=1ed4d6494fd8cc645f77b4e84be23425 (http://www.coolmods.co.uk/catalog/product_info.php?products_id=190&osCsid=1ed4d6494fd8cc645f77b4e84be23425)

is that the kit for the PSP Slim?
and does that "kit" come with everything you will need + instructions?

Thanks!
JoblessPunk

That is just a board, you will need a Analog Nub from a PSP, Kynar, Solder, Dremel, Etc. and a tut to be released.
Title: Re: Razor X in Slim By LordNico..
Post by: JoblessPunk on April 03, 2008, 02:36:28 PM
That is just a board, you will need a Analog Nub from a PSP, Kynar, Solder, Dremel, Etc. and a tut to be released.

Ty,
I can't wait till the tutorial is released.... just like everyone else thats seen that video! haha
Title: Re: Razor X in Slim By LordNico..
Post by: drchronic on April 03, 2008, 05:44:38 PM
So does this have all I need (minus the tutorial)?? http://www.coolmods.co.uk/catalog/product_info.php?products_id=189
Title: Re: Razor X in Slim By LordNico..
Post by: Skullmaster on April 03, 2008, 07:08:59 PM
no, will will need wire and other things. I suggest waiting for a tutorial, which will make this way easier  :yess:
Title: Re: Razor X in Slim By LordNico..
Post by: Ilzwalrus on April 04, 2008, 09:43:42 AM
One word: clean :)
Title: Re: Razor X in Slim By LordNico..
Post by: JoblessPunk on April 04, 2008, 04:37:00 PM
does anyone know how the tutorial is going?
Title: Re: Razor X in Slim By LordNico..
Post by: anthonyta on April 04, 2008, 11:33:58 PM
im still wondering is that the slims analog top? its a perfect circle unlike the fats
Title: Re: Razor X in Slim By LordNico..
Post by: S.T.R. on April 05, 2008, 04:02:52 PM
Ou man you are so god. I wait of a TUT.
Title: Re: Razor X in Slim By LordNico..
Post by: vgamer360 on April 08, 2008, 06:44:53 AM
I don't know if you guys knew this but looks like he got his story while back on Engadget.
http://www.engadget.com/2008/03/30/psp-slim-modded-for-dual-analog-sticks/ (http://www.engadget.com/2008/03/30/psp-slim-modded-for-dual-analog-sticks/)
Title: Re: Razor X in Slim By LordNico..
Post by: DubbleDutch on April 08, 2008, 07:56:21 AM
I don't know if you guys knew this but looks like he got his story while back on Engadget.
http://www.engadget.com/2008/03/30/psp-slim-modded-for-dual-analog-sticks/ (http://www.engadget.com/2008/03/30/psp-slim-modded-for-dual-analog-sticks/)

https://www.acidmods.com/forum/index.php?topic=17058.0 (https://www.acidmods.com/forum/index.php?topic=17058.0)
Title: Re: Razor X in Slim By LordNico..
Post by: vgamer360 on April 08, 2008, 08:10:33 AM
https://www.acidmods.com/forum/index.php?topic=17058.0 (https://www.acidmods.com/forum/index.php?topic=17058.0)
Ok, I guess you guys did know.  =/
Title: Re: Razor X in Slim By LordNico..
Post by: shload on April 08, 2008, 12:35:37 PM
Hey everyone, I just got my razor X in the mail.  I'm pretty sure i can mod my phat and get this installed, but if there were a tut on the way i may be able to hold off and wait.  any idea on a time frame for the tut?  will there be a tut for the Fat as well as the slim?

Cheers
Title: Re: Razor X in Slim By LordNico..
Post by: SYSTEM aka (Cyberpyrot) on April 08, 2008, 04:41:17 PM
Hey everyone, I just got my razor X in the mail.  I'm pretty sure i can mod my phat and get this installed, but if there were a tut on the way i may be able to hold off and wait.  any idea on a time frame for the tut?  will there be a tut for the Fat as well as the slim?

Cheers

Working on it :D
Title: Re: Razor X in Slim By LordNico..
Post by: JoblessPunk on April 09, 2008, 01:25:04 AM
Working on it :D


yay!

The tut is going to be for the slim...right?
Title: Re: Razor X in Slim By LordNico..
Post by: S.T.R. on April 09, 2008, 05:57:39 AM
When you release the TUT ?
I wait xD.
Title: Re: Razor X in Slim By LordNico..
Post by: i22foosh on April 09, 2008, 05:08:19 PM
is the razor x and razor 2 just differant because the razor x is easier to install?
Title: Re: Razor X in Slim By LordNico..
Post by: S.T.R. on April 17, 2008, 02:26:01 PM
And how long we must wait ?  :dribble:
Title: Re: Razor X in Slim By LordNico..
Post by: nez on April 17, 2008, 07:19:09 PM
longer then you have. just be patient and it will come ot sooner or later but just wait asking all the time only slows down the process.
Title: Re: Razor X in Slim By LordNico..
Post by: JoblessPunk on April 29, 2008, 02:12:59 PM
wow.
20066 views.

either hella people are waiting for this tut or its just 5 people that check this thread every hour  :w00t:
Title: Re: Razor X in Slim By LordNico..
Post by: Buddy on May 17, 2008, 05:11:31 PM
U are the best!!  :clap:

P.s. Can i know the name of the song pls?
Title: Re: Razor X in Slim By LordNico..
Post by: laohor on May 25, 2008, 03:02:37 AM
psp phat and psp slim dual nub tutorial all not released???
Title: Re: Razor X in Slim By LordNico..
Post by: sniper07 on May 28, 2008, 01:08:09 PM
Awesome work guys, acidmods FTW.
Tut would be super. ;D
Title: Re: Razor X in Slim By LordNico..
Post by: celph_titled on June 03, 2008, 01:08:46 PM
God this tutorial is taking forever!
Title: Re: Razor X in Slim By LordNico..
Post by: Dark_Daniel on June 16, 2008, 03:34:15 PM
Okay its been long enoughwhen do we get our tutorial why not a video mutch mutch easier
Title: Re: Razor X in Slim By LordNico..
Post by: bustinthejustin on June 16, 2008, 06:25:08 PM
K don't yell if the answer's obvious, since I don't play that many fps, but how does remapping the X[]/\O buttons to the second analog nub help you move your screen around? I thought the X[]/\O buttons are generally used for stuff like jumping, reloading, etc. etc.... or am I missing something here?
Title: Re: Razor X in Slim By LordNico..
Post by: Tri-edge on June 16, 2008, 06:46:05 PM
no in fps the  X[]/\O buttons are used for AIMING the gun, most of the time the dpad is used for reloading and the sort
Title: Re: Razor X in Slim By LordNico..
Post by: ShogoFPS on August 11, 2008, 12:58:11 AM
Great item i love that there is a kit for front or full case with it included, less the actual stick. But in my past hour of searching and fidguring out exactly what this mod does i feel the need to ask why not make it better?  Espically if one is expected to drop 10-30 euro for this kit. I have just a sudjestion i suppose. I recall playing most all my ps1 / ps2 / ps3 games shooters and all with right joy and left directionals. I understand wanting to map the buttons for use with psp fps, but why not take it another step add a button or switch with some simple wiring and map it so one can toggle the use of that new 3rd stick.  For example a toggle switch to swap between what part its mirroring, between the X O etc buttons, push toggle button and switch to mirroring the directional buttons, push it agin and it mirrors the left analog.  I also understand that this could be difficult to mirror the left analog but it would be worth fidguring out wouldnt it? =P

Please think about it, it would rock for manny more games if it had this functionability. =)

[edit]
Dont know forsure but from the image of the analog sticks bottom view ( http://www.dealextreme.com/details.dx/sku.10648 ), seems like it could possibly be straight 4 direction wiring neway.  :dntknw:
Title: Re: Razor X in Slim By LordNico..
Post by: Tri-edge on August 11, 2008, 06:59:48 AM
that's not the analog stick you use, you use the one for the orignal phat
Title: Re: Razor X in Slim By LordNico..
Post by: ShogoFPS on August 11, 2008, 03:10:16 PM
http://www.dealextreme.com/details.dx/sku.3373           bottoms wiring connections look pritty similar. but so what if the image i posted isnt the exact one used.   point be both seem to have 4 points.. would lead me to belive shiny silver = ground and the 4 points are on off switches for up down left right.. but i dunno(i belive i said that before). But the guy whos making the kit surely knows the interworking of it. point being... its possible... why not do it?
Title: Re: Razor X in Slim By LordNico..
Post by: Jumbo on August 11, 2008, 03:17:06 PM
No the razor is used to make it digital and convert it so it can read the powerboard.

If it was that easy why would we invent the razor??
Title: Re: Razor X in Slim By LordNico..
Post by: dizzy_chicken on October 12, 2008, 04:59:00 PM
has the tutorial for this been released yet/?
Title: Re: Razor X in Slim By LordNico..
Post by: Jumbo on October 12, 2008, 05:08:26 PM
Its not done yet..
Title: Re: Razor X in Slim By LordNico..
Post by: hadies6 on October 24, 2008, 04:33:43 AM
wow this mod is great  :tup: will this board work with a psp phat joystick or does the joystick half to be from a slim?
Title: Re: Razor X in Slim By LordNico..
Post by: ApheX on October 24, 2008, 05:25:53 AM
wow this mod is great  :tup: will this board work with a psp phat joystick or does the joystick half to be from a slim?

No, use the top part of a phat analog, it will fit better that i'm aware of.
Title: Re: Razor X in Slim By LordNico..
Post by: hadies6 on October 24, 2008, 12:34:16 PM
so u need to use the guts from the slim joystick, and the joystick housing from the phat?
Title: Re: Razor X in Slim By LordNico..
Post by: DubbleDutch on October 24, 2008, 03:18:08 PM
no

just the razor board
phat top part of the joystick (which includes the spring, top plastic part, and the analog nub and the thing that the nub itself attaches too)
Title: Re: Razor X in Slim By LordNico..
Post by: hadies6 on October 28, 2008, 09:09:08 PM
why is shipping on the razor x board $13 for a piece that is smaller then a letter. can't it simple mailed in a letter? for a fraction of the cost i want the part but it is a total of $37 with shipping this just seems high don't you think?
Title: Re: Razor X in Slim By LordNico..
Post by: alx_skater on December 17, 2008, 03:52:07 AM
Hello, im new here.
I want to ask how i should sold the 4 pins that have the analog stick of the psp slim. is the only thing i dont know how to do. what of these 4 pins are up down left right (triangle, X, [] and circle)
thanks
Title: Re: Razor X in Slim By LordNico..
Post by: treemty on December 17, 2008, 04:13:57 AM
Hello, im new here.
I want to ask how i should sold the 4 pins that have the analog stick of the psp slim. is the only thing i dont know how to do. what of these 4 pins are up down left right (triangle, X, [] and circle)
thanks
please dont bump an old topic
Title: Re: Razor X in Slim By LordNico..
Post by: Sanctus on December 17, 2008, 12:52:05 PM
Hello, im new here.
I want to ask how i should sold the 4 pins that have the analog stick of the psp slim. is the only thing i dont know how to do. what of these 4 pins are up down left right (triangle, X, [] and circle)
thanks
Look here: https://www.acidmods.com/forum/index.php?topic=25820.0 (https://www.acidmods.com/forum/index.php?topic=25820.0)
And make a new thread with these question, or even better, USE SEARCH! Don't bump old topics like treemty said.
SimplePortal 2.3.5 © 2008-2012, SimplePortal