Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: LethalPrime on September 26, 2017, 07:29:35 PM
-
ALERT: Sony is at it again with totally new and unnecessary controller revisions (known as JDM-050)
The vias and a couple of other things have changed!
This was sent to me for modifications from a person located in Chesapeake VA, therefore these are potentially now out in the wild in the USA
The rumble motors have new retaining devices both in the front shell and in the middle housing
https://imgur.com/N1I66Ez
https://imgur.com/3mz6WwC
https://imgur.com/uwdUZSr
The Share and options buttons are now built into the middle housing and the silk screen flexible pcb has changed to one piece (again, rolls eyes)
https://imgur.com/pI1cfFr
disassembly is still the same, however now the battery is held in with an adhesive square and the screw is what holds both the tray and the front housing
https://imgur.com/3QVsIVH
https://imgur.com/WgQwD6v
The battery connection and wire holder is now flipped to the right side
https://imgur.com/4SXQNCS
The front light bar assembly is now rounded and the flex cable has flipped to the opposite side
https://imgur.com/cgySbhj
battery and flex cable connectors have flipped to other sides
https://imgur.com/J2ei9X1
VIAS have changed, however it looks like RDC's JDM-040 simpleflex might still work (unconfirmed)
https://imgur.com/6VfIkQJ
https://imgur.com/darxLIW
https://imgur.com/iZCAYjL
-
They went back to the 1 piece daughter board on the JDM-040 version. ;)
The SFX-040, and the JDM-040 RemappeD, both still work on the -050 version here, as well as the newer -055 version. The DS4 controller thread has also been updated with these boards now as well.
https://www.acidmods.com/forum/index.php/topic,43542.msg324803.html#msg324803 (https://www.acidmods.com/forum/index.php/topic,43542.msg324803.html#msg324803)