91
PS4 Controllers/PS4 Rapid Fire Controllers / Re: JDM-001 Resistor values please
« Last post by RDC on February 04, 2024, 02:31:09 PM »Top is a 0ohm jumper, bottom one is 4.7k
Please help support the site by donating at the link below.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
91
PS4 Controllers/PS4 Rapid Fire Controllers / Re: JDM-001 Resistor values please« Last post by RDC on February 04, 2024, 02:31:09 PM »Top is a 0ohm jumper, bottom one is 4.7k
92
PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans« Last post by Aroma9435 on February 04, 2024, 12:59:57 PM »Alps part # for the 240gf is SKRWADE030, for the 160gf SKRWAEE030 Much appreciated! You guys are incredible, I couldn't find this in-depth info anywhere else! 93
PS4 Controllers/PS4 Rapid Fire Controllers / JDM-001 Resistor values please« Last post by Eyeball_40 on February 04, 2024, 12:40:55 PM »94
PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans« Last post by RDC on February 04, 2024, 06:41:13 AM »Stuck 100% down, it's usually either the POT has no ground connection or the 1.8v side is shorted to the Wiper.
95
PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans« Last post by abadgamer on February 04, 2024, 06:35:59 AM »hi RDC
i have a ps5 controller (bdm - 030) with broken right analog. i changed it with ps4 analog and ps5 analog but it fully stuck AT DOWN , but right and left are good. my ls is just keep moving right and left but in a very short radius. can u help me? 96
PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans« Last post by RDC on February 04, 2024, 06:20:49 AM »Alps part # for the 240gf is SKRWADE030, for the 160gf SKRWAEE030
C&K, E-Switch and Wurth also make that thing, and really any of them will do the job, as long as it's not nuked while installing it. 97
PS4 Controllers/PS4 Rapid Fire Controllers / Re: PS4 controller dead« Last post by RDC on February 04, 2024, 06:10:35 AM »That is a PWM DC/DC type Regulator that is adjustable, and the pinout is also wrong.
That R3244 thing is some kind of Linear Regulator with a Fixed output, like the RT9020-32, TLV70032 or similar. 1 - Input 2 - Ground 3 - Enable 4 - BYP, SS or NC 5 - Output, 3.2v 98
PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans« Last post by Aroma9435 on February 04, 2024, 05:46:37 AM »For ps4 are 3.7mm, for ps5 i don't know, maybe 3.3mm? check the size with the gauge and then write smd tactile button on AliExpress and order it, obviously you pay less if you take the compatible one and the original one, the original 20 piece ps4 smd smd buttons were sold for 4 usd, I got 100 pieces for 2.7usd They look quite similar to the 3.7x3.7x0.35 ones you mention, I currently don't have a electronic caliper to check, thanks a lot! 99
PS4 Controllers/PS4 Rapid Fire Controllers / Re: PS4 controller dead« Last post by ecimko on February 04, 2024, 12:03:36 AM »Ok that's I great clue. I found this one using your information.
https : //www.aliexpress.com/item/1005005919312644.html?spm=a2g0o.detail.0.0.57976lT66lT6v9&mp=1 What do you think? It looks promising.... RT8059GJ5 SMD SOT23-5 adjustable 1A 100
PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans« Last post by zis2104 on February 03, 2024, 04:08:34 PM »For ps4 are 3.7mm, for ps5 i don't know, maybe 3.3mm? check the size with the gauge and then write smd tactile button on AliExpress and order it, obviously you pay less if you take the compatible one and the original one, the original 20 piece ps4 smd smd buttons were sold for 4 usd, I got 100 pieces for 2.7usd
|