Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP Phat (1000) => PSP's => PSP Phat Tutorials => Topic started by: Electro on February 05, 2008, 01:35:20 PM

Title: ~PSP's L2 & R2 buttons MOD! By Electro~
Post by: Electro on February 05, 2008, 01:35:20 PM
PSP L2 & R2 MOD BY Electro

Finally Finished and Tut added

Introduction
This MOD uses small switches within the L and R buttons to allow the use of L2 and R2. :D

(https://www.acidmods.com/moddedmatt/l2r21.jpg)(https://www.acidmods.com/moddedmatt/l2r22.jpg)

http://http://www.youtube.com/watch?v=3Jlb6UwqHMY#normal (http://www.youtube.com/watch?v=3Jlb6UwqHMY#normal)


Parts Needed


Tools Needed


Difficulty rating: 4/5


Notes:
The following mod requires you to solder to your PSP's Motherboard!
So if you don't know how to use a soldering iron I suggest you don't do this MOD.

This MOD is for the fat PSP, but you can do the same on the Slim.
Although I would never take my Slim apart. :P

This will not affect your PSP's normal play outside PS1 Games!
Everything will work like it should Joystick, D-Pad and all the buttons.
 
Step By Step Tutorial
1- This is the part of the motherboard U will be soldering.
The bottom left corner of the PSP where the joystick connects via the rubber conductor.
(https://www.acidmods.com/moddedmatt/l2r23.jpg)

2- Solder the 3 9in wires to the motherboard and also solder the 4th 3in wire to the motherboard. (Look at the image above.) (Solder the ends where you connected the 6 wires together.)

3- Solder the 4 3in wires to the joystick. Solder an additional 6in wire to #2.
https://www.acidmods.com/moddedmatt/l2r24.jpg (https://www.acidmods.com/moddedmatt/l2r24.jpg)[/img]

4- Get any kind of a small switch that U can find:
(https://www.acidmods.com/moddedmatt/l2r25.jpg)
The click buttons on the left are from a 2 way radio.
The click button on the right is from a PC mouse.

5- Solder the 1 and 2 wires to a switch. (This will be the R2.)

6- Solder the 2 and 3 wires to a switch. (This will be the L2.)
           
7- Put the switches where you like.

8- DONE!

Enjoy your L2 and R2 Buttons and have fun playing PS1 games.  ;)

Make sure your using the TYPE 1 Controls from the control menu when playing PS1 games.
When U do this MOD.

Because D-Pad is the controls for movement, and joysticks left and right controls are L2 and R2.

FAQ/ Troubleshooting

SimplePortal 2.3.5 © 2008-2012, SimplePortal