Author Topic: PSP Dissassembly  (Read 9779 times)

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
PSP Dissassembly
« on: August 14, 2007, 05:36:20 AM »
PSP Dissassembly:

(Video at the Bottom)




1. Open AVPM, There should be a shortcut on your desktop, If there is not a shortcut go to: Start > Programs > AcidMods > AVPM.



2. A box should pop up that says user agreement at the top, Read it and click yes if you agree, which you should. (Ignore the spelling mistake usar lol)



3. Next the splash screen should come up, When you have finished reading click it and it will go off.




4. Next the Program will Start.




5. Next Click on the Flip button on the right hand side, If you dont see it click on the tools tab and it will come up




6. The PSP Should now be flipped. Image Below:




7. Next Click the Screwdriver




8. The Screwdriver should appear in the little box in the corner and there should be yellow boxes on 5 screws. We will come back to the other 2 screws later.




9. Now click the screws (yellow boxes) with your cursor, when they have been clicked they go black.




10. Now you need to put the screwdriver back, you do this by clicking the button.




11. Now flip the psp over.




12. Then Click on the screen


It should now look like:





13. Now select the Tweezers


Now you should see a yellow box:


You need to click that and it will turn black




14. Put the Tweezers away by clicking the button




15. Now double click on the PSP Screen with your cursor.

First the Homebar will come off then the Screen...




16. Now click the screwdriver


Yellow Boxes should appear on the LCD Cage Screws


Click them and they will go black


Now click the screwdriver button.




17. Now click the flip button


It should now look like this:


Now click the screwdriver button


2 Yellow Boxes should appear on screws


Click them with your cursor and they should go black




18. Now click the screwdriver


Now Click the Flip Button


Then Click the LCD Cage and it will come off...




19. Now click the Screwdriver


A yellow box should appear on the dpad screw.


Click that and turn it black.


Now click the screwdriver button.




20. Now click the tweezers


You should see a yellow box appear




Click that and make it black


Then put the tweezers away.




21. Click the motherboard and the dpad should come off.




22. Click the Tweezer Button.


A yellow box will appear


Click that and it will go black


Then click the tweezers again


Now Click the Motherboard, The Power Board will come off...




23. Now click the Screwdriver and 2 Yellow Boxes will come up


Click them and they will go black


Then click the screwdriver button




24. Now click the Tweezer Button


2 Yellow Boxes will come up


Click them and they will go black


Now click the Tweezer button again


Then click the motherboard, it will come off



25. Now you see the UMD Cage, Click the Screwdriver


3 Yellow Boxes will now come up, Click them.


They will go Black


Now click the screwdriver button


When you have done that click the middle of the cage and it will come off.



26. Click the PSP 2 more times untill the UMD Drive and Memstick door are left.


Now click the screwdriver


A yellow box will appear on the mem stick door screw



Click that and it will go black


Now click the screwdriver button




27. Now click the middle of the psp and the mem stick door will come off.

When you have done that click the flip button


Then click the screwdriver


4 Yellow Boxes will appear



Click them and they will go black


Now click the screwdriver




28. Flip the PSP back over and click the UMD Drive.



You have now fully dissasembled a Virtual PSP!!!



Video:

[youtube=425,350]VYP4txraxBM[/youtube]


« Last Edit: August 14, 2007, 03:18:54 PM by simcityltd »

Offline mikethebear

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
Re: PSP Dissassembly
« Reply #1 on: February 10, 2008, 12:39:02 AM »
im kinda new but where can i download this?

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: PSP Dissassembly
« Reply #2 on: February 10, 2008, 02:18:24 AM »

PINOY AKO

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: PSP Dissassembly
« Reply #3 on: February 10, 2008, 02:22:41 AM »
thx man been looking for something like this now i have it thx
come to the rite place if you kiss admins as they promote you to admin.

Offline lamborghini4050

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
Re: PSP Dissassembly
« Reply #4 on: February 11, 2008, 01:47:00 AM »
i dont suppose you know how to put led lights in?

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: PSP Dissassembly
« Reply #5 on: February 18, 2008, 11:05:29 PM »
i dont suppose you know how to put led lights in?


using the vpm or literally mod it

PINOY AKO

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal