PSP Dissassembly:
(Video at the Bottom)
1. Open AVPM, There should be a shortcut on your desktop, If there is not a shortcut go to: Start > Programs > AcidMods > AVPM.
2. A box should pop up that says user agreement at the top, Read it and click yes if you agree, which you should. (Ignore the spelling mistake usar lol)
3. Next the splash screen should come up, When you have finished reading click it and it will go off.
4. Next the Program will Start.
5. Next Click on the Flip button on the right hand side, If you dont see it click on the tools tab and it will come up
6. The PSP Should now be flipped. Image Below:
7. Next Click the Screwdriver
8. The Screwdriver should appear in the little box in the corner and there should be yellow boxes on 5 screws. We will come back to the other 2 screws later.
9. Now click the screws (yellow boxes) with your cursor, when they have been clicked they go black.
10. Now you need to put the screwdriver back, you do this by clicking the button.
11. Now flip the psp over.
12. Then Click on the screen
It should now look like:
13. Now select the Tweezers
Now you should see a yellow box:
You need to click that and it will turn black
14. Put the Tweezers away by clicking the button
15. Now double click on the PSP Screen with your cursor.
First the Homebar will come off then the Screen...
16. Now click the screwdriver
Yellow Boxes should appear on the LCD Cage Screws
Click them and they will go black
Now click the screwdriver button.
17. Now click the flip button
It should now look like this:
Now click the screwdriver button
2 Yellow Boxes should appear on screws
Click them with your cursor and they should go black
18. Now click the screwdriver
Now Click the Flip Button
Then Click the LCD Cage and it will come off...
19. Now click the Screwdriver
A yellow box should appear on the dpad screw.
Click that and turn it black.
Now click the screwdriver button.
20. Now click the tweezers
You should see a yellow box appear
Click that and make it black
Then put the tweezers away.
21. Click the motherboard and the dpad should come off.
22. Click the Tweezer Button.
A yellow box will appear
Click that and it will go black
Then click the tweezers again
Now Click the Motherboard, The Power Board will come off...
23. Now click the Screwdriver and 2 Yellow Boxes will come up
Click them and they will go black
Then click the screwdriver button
24. Now click the Tweezer Button
2 Yellow Boxes will come up
Click them and they will go black
Now click the Tweezer button again
Then click the motherboard, it will come off
25. Now you see the UMD Cage, Click the Screwdriver
3 Yellow Boxes will now come up, Click them.
They will go Black
Now click the screwdriver button
When you have done that click the middle of the cage and it will come off.
26. Click the PSP 2 more times untill the UMD Drive and Memstick door are left.
Now click the screwdriver
A yellow box will appear on the mem stick door screw
Click that and it will go black
Now click the screwdriver button
27. Now click the middle of the psp and the mem stick door will come off.
When you have done that click the flip button
Then click the screwdriver
4 Yellow Boxes will appear
Click them and they will go black
Now click the screwdriver
28. Flip the PSP back over and click the UMD Drive.
You have now fully dissasembled a Virtual PSP!!!
Video:
[youtube=425,350]VYP4txraxBM[/youtube]
