Author Topic: nEoVaLoR's iPhone 3gs  (Read 3582 times)

Offline nEoVaLoR

  • Local Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
nEoVaLoR's iPhone 3gs
« on: April 01, 2011, 07:10:18 PM »
Not even CLOSE to being done... gonna be up for a very long time tonight...

It's pretty crazy how precise you can melt plastic if you stick a flathead into a soldering iron...





Day Two:
Clear glass (acheived with paint thinner and 320 grit sandpaper)
« Last Edit: April 06, 2011, 02:53:27 PM by nEoVaLoR »

Offline FOOKz™

  • Hardware Modder
  • Research & Development
  • E = MC² Mad Scientist
  • *
  • Posts: 2070
  • Post quality +37/-2
  • Electronics Expert Electrical Engineer
Re: nEoVaLoR's iPhone 3gs
« Reply #1 on: April 01, 2011, 07:11:43 PM »
cool

Follow my Instagram and subscribe to my YouTube

Offline robin1989

  • Site Owner - Site Maintenance & development
  • Administrator
  • Mad Bomber
  • *
  • Posts: 6272
  • Post quality +21/-0
  • Gender: Male
  • Site owner
    • Acidmods
Re: nEoVaLoR's iPhone 3gs
« Reply #2 on: April 02, 2011, 03:09:43 PM »
Nice.

i am not responsible for what i do or my advice


Get the iPhone 4s from Three using Quidco and recieve £109 cashback

Offline Kishan3593

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Acidmods User
Re: nEoVaLoR's iPhone 3gs
« Reply #3 on: January 22, 2012, 04:29:17 AM »
Hi just joined the forum and was looking through and saw your post, very cool so far , are you going for the logo glowing mod, that's what i wanted to try and do. You said you just used a flat head in the soldering iron , is that the best way to cut the logo out did you try anything else, and i didn't quite understand when you wrote 'Clear glass (achieved with paint thinner and 320 grit sandpaper) ' is that the layer the goes on top of the logo cut out if so can you explain a bit more , also if you are doing the glowing logo then how are you planning on connecting the LED,  i would really appreciate the help.

Thank You

Kishan

PS Sorry to bother you with this i know you posted this several months ago and may have moved onto something else but i really would appreciate it.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal