Author Topic: controller led connection  (Read 2339 times)

Offline getweird

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Acidmods User
controller led connection
« on: December 15, 2014, 10:36:20 PM »
So I was removing an led with my solder iron and accidentally burned off a contact point. Is there any way to repair that, or possibly still get a connection? Any help at all on the subject will be appreciated! Thanks guys!

Offline Demonboy

  • MFH
  • Granny Spanker
  • *
  • Posts: 362
  • Post quality +6/-0
  • Gender: Male
  • hunterish
Re: controller led connection
« Reply #1 on: December 15, 2014, 11:13:46 PM »
any way you can get a good picture of what you did? they really help, but generally you can follow the trace back a little bit and scratch off the green coating to the copper and with some flux and wire u can extend the trace where you need it

lol look at this crap u can get like 5 bucks a day for doing  poop http://adf.ly/2Knsr

Offline getweird

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Acidmods User
Re: controller led connection
« Reply #2 on: December 16, 2014, 03:29:31 PM »
Here's a couple pictures. I hope it helps...the lighting is :censored:, but that's all I had to work with :/




Offline Demonboy

  • MFH
  • Granny Spanker
  • *
  • Posts: 362
  • Post quality +6/-0
  • Gender: Male
  • hunterish
Re: controller led connection
« Reply #3 on: December 16, 2014, 09:32:40 PM »
you worked that board over pretty good lol... yea u see the little traces that lead to where the pads should be, scratch the green off and expose the copper, use some flux and solder some wire on there and use tht to connect ur leds

lol look at this crap u can get like 5 bucks a day for doing  poop http://adf.ly/2Knsr

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2587
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Demonboy

  • MFH
  • Granny Spanker
  • *
  • Posts: 362
  • Post quality +6/-0
  • Gender: Male
  • hunterish
Re: controller led connection
« Reply #5 on: December 17, 2014, 06:13:24 PM »
what he said ^^   :tup:

lol look at this crap u can get like 5 bucks a day for doing  poop http://adf.ly/2Knsr

Offline getweird

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Acidmods User
Re: controller led connection
« Reply #6 on: December 17, 2014, 09:56:29 PM »
You guys are probably the most helpful mother:censored:ers I've ever had the privilege to encounter. I'm gonna try this out tomorrow an see what happens. Thanks guys!

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: controller led connection
« Reply #7 on: December 18, 2014, 07:26:31 AM »
how did Mother:censored:ers get past the word filter is what I want to know. Thanks SMF!!

Offline Demonboy

  • MFH
  • Granny Spanker
  • *
  • Posts: 362
  • Post quality +6/-0
  • Gender: Male
  • hunterish
Re: controller led connection
« Reply #8 on: December 18, 2014, 09:03:51 AM »
it didnt matt... the FBomb is  :censored: lol

lol look at this crap u can get like 5 bucks a day for doing  poop http://adf.ly/2Knsr

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal