Author Topic: 9 Mode Jump Drop Shot Hex (12f1822)  (Read 66757 times)

Offline leonemax81

  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #90 on: August 07, 2015, 10:29:34 AM »
Thanks for sharing, I want to ask you in the photo guide there is a button as you turn on the rapid? and then and both RT and LT?

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #91 on: August 09, 2015, 06:13:07 PM »
I'm not sure I completely understand the question.

Do you mind rewording it?

Offline leonemax81

  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #92 on: August 09, 2015, 10:48:56 PM »
Excuse me but I know little English, in the photo guide showing the connection points, but nn is no button to activate and deactivate the rapid, you can also put a picture of your rapid installed so better understand? thanks.

WHITE 4ND N3RDY

  • Guest
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #93 on: August 10, 2015, 03:40:21 PM »
I beleive pin 4 & pin 8 connect to a 6*6*5mm spst tac switch. Or u can attach pin #4 to a sync trace on the Xbox one pcb and use the sync button on the controller to change modes. Personally a tac switch is the way to go. Very easy to find and are super cheep.
« Last Edit: August 10, 2015, 03:48:48 PM by WHITE 4ND N3RDY »

Offline leonemax81

  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #94 on: August 10, 2015, 11:38:12 PM »
Understood but need a single button? that is a button that activates the rapid key is on LT and RT is the key, remember that the joystick xbox 360 need two buttons.

WHITE 4ND N3RDY

  • Guest
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #95 on: August 11, 2015, 04:58:01 AM »
It's very easy to understand. U have a monetary tac switch "6*6*5 mm spst 4 pin tac switch, look for it on eBay" (extra button) u tap that button now your in mode 1 ( controller led will flash 1 time to represent that you are in mode 1).Rapid fire will automatically be set to your RT of the controller. If u want to turn it off all u need to do is hold the tac button down for 3 seconds. U can also move forward and back through modes. Say your in mode 4 and want to be in mode 3. If u hold left trigger and tap tac button (mod switch) then I will go into mode 3 of the mod chip. The led on the controller will tell you what mode you are in by flashing the number of times of the mode u are currently in. Review all 10 modes on the chip to know what mod u want to be in!

Everything works through the triggers of the controller. U need to read through this entire thread to better understand how all this all works. Its pretty simple stuff. If u can't understand it I would suggest u just buy a modded controller and spare yourself of ruining a controller. P.s this code is for a xbox one controller and not a 360 joystick. U will fail if u put this chip in a 360 controller.
« Last Edit: August 11, 2015, 05:17:21 AM by WHITE 4ND N3RDY »

Offline thewarners777

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #96 on: August 11, 2015, 02:50:33 PM »
Thanks @sethmods for posting the hex file again. I really appreciate it.

I have tried flashing the hex with a pickit3 and it flashes and verified fine but when I soldered the chip in it doesn't work. I have another 9 mode chip that I sadly purchased on eBay that I soldered in and it works fine.

Anyone have any tips on flashing this hex with a pickit3? It microchip software detects the chip and downloads the firmware fine.

I am just seeking a bit of guidance

Thanks again sethmods

Offline leonemax81

  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #97 on: August 20, 2015, 01:20:24 PM »
ok guys installed everything works everything perfectly, but I wanted to ask the first three rapid methods are very slow compared to the rapid and xbox 360 or so and my impression.

guys I'm continuing to use me as said before, slow but very slow compared to the Xbox 360, as you can give more speed?

[mod]use your modify tab. Please don't double post. I have to take my time to fix this, thanks[/mod]
« Last Edit: August 20, 2015, 05:26:50 PM by WHITE 4ND N3RDY »

WHITE 4ND N3RDY

  • Guest
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #98 on: August 20, 2015, 05:32:31 PM »
This is a fixed hex file. What u are inquiring would have to be made by sethmods. As of now I get what u get. The chips are programmes to the same speeds as the 360 versions of Seth's software. Its exactly the same. Its all programed by milliseconds and they are 100% identical. Game comparisons from 360 to xb1 are going to be different. Its all in how the programers input the rate of fire caps in their games.

Offline leonemax81

  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #99 on: August 21, 2015, 12:19:41 AM »
I'm trying to play battlefield 4 and tell you it is very slow but very very slow, I see video on youtube rapid fire xbox one faster than the other, then the mode, drop shot, Reset, Jump Shot, Jump Drop Shot , are single-shot as ever?
« Last Edit: August 21, 2015, 12:20:19 AM by leonemax81 »

WHITE 4ND N3RDY

  • Guest
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #100 on: August 21, 2015, 02:05:26 AM »
You can't compare what you see on videos. I'll tell u now the way they record these videos the playback funtion gives u a false veiw of actual gameplay. From the sounds of the shots to the recoil of the gun and yes even the sps of rounds being fired. Might be my personal opinion but I've seen this all to much with my own eyes!

This is a free opensourse code that was geerously put out so u don't have to get robbed in the wallet for some 8 pin Rapid fire microchip on ebay. Sorry it dosent have reprogrammible rapidire or the function to use rapids fire when using dropshot ext.

If u want all that go to ebay and spend 25$ on a Rapid fire chip kit. Or if u want to be super cheep or crafty just install another chip in your controller. Problem solved.

U can run your drop shot or whatever on one chip then Rapid fire on the other. Real easy plus u can just clone the connections on your original chip to the other chip. All u have to do after all that is add another tac switch on your controller. Other than that I don't know what u want. If u want to complain that this mod is slow this isn't the site to do it in. If u want a solution to your problem then this is your site and I've listed your solutions to this problem. Good day.
« Last Edit: August 21, 2015, 02:06:01 AM by WHITE 4ND N3RDY »

Offline leonemax81

  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #101 on: August 21, 2015, 02:33:55 AM »
I I'm not complaining code free indeed thank the author for the free issue, but I noticed the difference between the rapid fire xbox one and the rapid fire xbox 360 and I thought that the problem was my installation wrong just because I see youtube video with rapid fire xbox one faster ..
« Last Edit: August 21, 2015, 02:34:45 AM by leonemax81 »

WHITE 4ND N3RDY

  • Guest
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #102 on: August 21, 2015, 04:58:58 AM »
 I told u sethmods software is 100% the same with all his 8 pin microchips. I told u how to solve your iproblem. U also never stated till now u think it's a installation issue. Your exact words were everything went perfectly.

 I will still try to help u out cause I truily be live u may of bugerd something up. U need to provide pics (good pics) of your installation then members here can evaluate if their is a problem or not. Lets go from there.
« Last Edit: August 21, 2015, 05:08:21 AM by WHITE 4ND N3RDY »

Offline leonemax81

  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #103 on: August 21, 2015, 06:25:56 PM »
installation rebuilt from scratch, it seems to work quite well, thank you for your time to answer my questions.

WHITE 4ND N3RDY

  • Guest
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #104 on: August 21, 2015, 07:24:35 PM »
I dident mean to come off rude I was replying to u @ 1 am on the morning. Personally soon I hope to post a 10 mode for xb1 with adjustable rf and bad butt modes. Just hang right and hopefully I'll post some new sourse codes. I just need to kick Seth down a host donation for his software first!!!
« Last Edit: August 21, 2015, 07:25:36 PM by WHITE 4ND N3RDY »

Offline thewarners777

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #105 on: August 24, 2015, 03:12:35 PM »
Would be awesome if you put together that code. What does he need for his hosting?

WHITE 4ND N3RDY

  • Guest
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #106 on: August 24, 2015, 03:26:30 PM »
My phone spell check is a pain. It would be deeply appreciated to give donations to sethmods to keep his web domain running. All the software comes from his webpage. He is look in into posting up a donation box here so when he does myself and 'm sure other members will donate money to keep his web page running.
« Last Edit: August 24, 2015, 03:27:31 PM by WHITE 4ND N3RDY »

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #107 on: August 24, 2015, 06:18:54 PM »
It's up. It's on the mainpage of diymod.work.

Offline thewarners777

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #108 on: August 26, 2015, 09:03:56 AM »
do the mods work with XB1?

Also how do you register?
« Last Edit: August 26, 2015, 09:11:20 AM by thewarners777 »

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #109 on: August 27, 2015, 08:54:22 PM »
To register click "Register Now".

http://diymod.work/hexcreator/index.php

That's what the "It's free" arrow is pointing to.


Hexcreator only allows for XB360 code today, but I plan to make the XB1 code free as well.

It may take a month or so though.

Offline johnscrub

  • Guppy
  • *
  • Posts: 7
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #110 on: September 07, 2015, 03:56:40 AM »
i cannot wait for that Seth.I have one of your diymax chips and some  basic chips from you.Are you going to try and do a zombie mode or will the 360 version work with the xbox one?

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #111 on: September 08, 2015, 04:39:50 AM »
I'm hoping the XB360 Zombie mode will work for XB1, but I don't really know. I haven't tested it. Maybe someone else can comment if they have tried it.

WHITE 4ND N3RDY

  • Guest
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #112 on: September 08, 2015, 04:52:03 AM »
It has changed a lot from 360 days. I hope that mine will work but I can't really test any of my stuff as my pc crashed and I lost my pickit2 operating system. I tried finding it but all it says now that pickkit2 is obsolete and they only support pickit3 now. That really pissed me off, anyways I can't even flash 12f683 or 12f1822 mirochips ATM. I have the bare bone stock os firmware for pickit2 and can't find the is to flash the 12f1822 microchips. Of I had that I could test my stuff out and fisgure it out.

Offline thewarners777

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #113 on: September 08, 2015, 10:05:39 PM »
I think someone posted something a couple pages back on how to flash 12f1822 with the pickit2

WHITE 4ND N3RDY

  • Guest
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #114 on: September 09, 2015, 05:53:56 AM »
The link dosent work anymore. It just says that pickit2 is obsolete and to buy a pickit3. RDC found me some links that should get me what I need. I just won't have time till Saturday afternoon to uppload them. Thanks anyways.

Offline johnscrub

  • Guppy
  • *
  • Posts: 7
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #115 on: September 09, 2015, 02:58:13 PM »
Wow that would be great..right now im using a cronusmax for my xb1...Thanks for the response..i dont use my max controller anymore ccause i lost the sethmod program software..lol..well ill keep checking back and thanks for all of ya.ll hard work

Offline thewarners777

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #116 on: September 17, 2015, 01:42:53 PM »
any word on your code @white and nerdy?

WHITE 4ND N3RDY

  • Guest
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #117 on: September 17, 2015, 04:45:40 PM »
No I'm having issues updating my pick it to support the 12f1822 microchip plus I would like to ask Seth first to post my work also I want to donate more. I put 20$ down but I want to throw a hundred in to his software before I even ask about posting opensourse codes using his software. I just bought a house and dumped 7000$ on closing cost. Its going to be a while before I do this. Many obsticals in my life right now.

Offline johnscrub

  • Guppy
  • *
  • Posts: 7
  • Post quality +0/-0
  • Acidmods User
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #118 on: December 21, 2015, 05:10:07 AM »
Sethmods i see that you have included the xbox one hex creator now..does the zombie modes work for xbox one now also?Has anyone tried this on any of the newer zombie games?

WHITE 4ND N3RDY

  • Guest
Re: 9 Mode Jump Drop Shot Hex (12f1822)
« Reply #119 on: December 21, 2015, 07:31:37 AM »
Just get a 8 pin dip socket and wire your controller accordingly to the setup u want to run then u can test your codes out and easily  re flash your 12f1822 micochip. U can try his zombie mode if it doesent work I have one I can dig up for u.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal