Author Topic: Expired Modders For Hire Advertisements (pre 2010)  (Read 47614 times)

Offline robin1989

  • Site Owner - Site Maintenance & development
  • Administrator
  • Mad Bomber
  • *
  • Posts: 6272
  • Post quality +21/-0
  • Gender: Male
  • Site owner
    • Acidmods
Expired Modders For Hire Advertisements (pre 2010)
« on: November 21, 2007, 04:42:48 PM »
Here are all the modders for hire adverts.
« Last Edit: March 13, 2010, 06:46:47 PM by modded matt »

i am not responsible for what i do or my advice


Get the iPhone 4s from Three using Quidco and recieve £109 cashback

Offline pinoyballa

  • Millennium Poster
  • *
  • Posts: 1245
  • Post quality +0/-0
Re: Modders For Hire Advertisements
« Reply #1 on: November 21, 2007, 08:34:52 PM »
Pinoyballa00009

consoles modded

-  PSP
--- USB charge mod
--- Sound reactive triggers
--- Trigger Mod
--- Case Installation
--- PSP Repair
--- Jewl Installation
--- Converting Charger to USB
- Wii
--- LED in speakers of Wiimote
--- LED in nunchuck port of Wiimote
--- LED in analog stick of Nunchuck
--- LED in Z button of Nunchuck
---  Blue Ring of Lights on all the time
- NES
---72 Pin Connector Replacement
-DS Lite
---Case Swaps

About You

I got into modding basically when i was about 7, I found out about a thing for PS1 (I'm sure you can all guess), so i got my Dad to order me one, and he helped me install it since he does a lot of things with electronics....Then after that i really stopped because there was nothing else to do...Then I discovered Acidmods, my friend showed me the forums and it just really took off from there. As far as my location I live in the United States, just outside of New York City.

Contact Information

Email - pinoy_balla0009@hotmail.com
msn - pinoy_balla0009@hotmail.com
aim - pinoyballa0009
phone - (USA) 631-560-1016 

Modding Example

Example 1
Heres The Wiimote Mod with Blue LED's in the Nunchuck Port, B button and speaker...And in the Nunchuck it has another blue LED... I give it a 4 out of five becuase the glue job in the nunchuck port doesn't look good if you really look at it up close. Took me around 30 mins to do everything.




Example 2
PSP Green Trigger mod.. I give this one a 3 only because this was the first PSP Mod I did and i drilled the triggers a little to deep. Took me about an hour to complete.




Example 3
Ds Lite Case Swap. This one took me a while only because the Top Screen is hard to fit through the case I'd say it took me around 2 hours. Ill give myself a 4 on it.





T&C


- No REFUNDS for any reason at all, all mods will be tested and guaranteed to work at time of shipment. By purchasing my services you agree that if anything happens to your console during the time of shipment I AM NOT responsible for what happens.
- All buyers pay shipping both ways for the service.


I am still working out pricing so ill get back on that

ACIDMODS IS NOT RESPONSIBLE FOR ANY MODS THAT I DO OR ANY ACTIONS THAT I TAKE

« Last Edit: November 22, 2007, 04:16:12 AM by robin1989 »

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: Modders For Hire Advertisements
« Reply #2 on: November 22, 2007, 09:07:06 PM »


About

You could have the most unique PSP. Impress your friends watch as they awe at it in disbelief. Be the Most popular kid in school with a modded PSP by me. Don't risk damaging a working PSP by doing it yourself and ending up with a broken one.

I have a lot of experience when it comes to modding as you can see below my PSP is better than anything you can buy off a shelf of a store. I have all the materials to execute each and every mod to their fullest, unlocking and uncovering new abilities not given to a normal PSP leaving you with the best PSP possible. Similar Services elsewhere can leave you with a broken nonfuctional PSP and no hope except to buy a new one.

I have once tried a PSP modding service and ended up having a badly scratched PSP and have it not as functional as before. I don't want you or anyone to experience that kind of pain so I offer you my service as a Safe Reliable way to mod you PSP.
 
Consoles Modded

- PSP
--- Sound Reactive LEDs
--- Full Case Replacement
--- Wifi/Memory LED Swap
--- Power/Charge LED Swap
--- Hold Activated Triggers
--- Hold LED
--- Custom Firmware
--- Dual Nub

Available Mods

PSP Phat


- PSP Diagonstic FREE (See if you have any problems with you PSP Once Problem is found I will tell you my conclusions)

- Trigger Mod $25
-- LED color available
  • Blue
  • Red
  • White
  • Yellow
  • Green

  • Different Types of Trigger Mods NO EXTRA CHARGE
*Hold activated LED trigger-brighter
have the choice to disable the hold switch, but be disabled as a default
*Sound reactive- blinks to music, but not as bright



- Custom Firmware(Play Games on Memory Stick) $10

- Case Replacement $40 (installation only)
-- Case and installation $80
--- Available case colors
  • Chrome
  • Clear
  • Metallic Blue
  • Metallic Red
  • Gold
  • Metallic Green
  • Metallic Yellow
  • White

- FacePlate Replacement $10 (installation only)
-- Faceplate and installation $25
--- Available faceplate colors
  • Clear
  • Metallic Pink
  • Gold
  • Metallic Red
  • Metallic Green
  • Black

- Button replacement $10 (installation only)
-- Buttons and installation $20
--- Available buttons colors
  • Clear
  • Metallic Blue
  • Gold
  • Red
  • Silver

-Hold LED near the power led below it and hold is still active $10
-- Available colors
  • Blue
  • Red
  • White
  • Yellow
  • Green

_ Analog stick on the side $40
-- Left side wired to analog nub
--- Right side wired to XO/\[]
---- EXAMPLE(Josenose)
[youtube=425,350]g2vHG8QVUT8[/youtube]

- LED swaps
-- Wifi,memory,power,charge $15
--- Available colors
  • Blue
  • Red
  • White
  • Yellow
  • Green

- USB charge mod $10

- UMD Door Mod
-- Cut UMD door with jewel and cut UMD cage $35
-- Cut UMD door w/ jewel and two LEDs(available colors) and cut UMD cage $40
-- Precut door $10
-- Precut UMD Cage $15

Repair Services

- Replacement
-- Analog nub $15
  • Black
  • White
  • Pink
-- LCD With Backlight $45
-- Powerboard $10
-- UMD Drive $35
-- UMD door $15
-- Ribbon cables $10 
-- Memory Stick slot $25



PSP Slim/2000

- Trigger Mod $25
-- LED color available
  • Blue
  • Red
  • White
  • Yellow
  • Green

- FacePlate Replacement $10 (installation only)
-- Faceplate and installation $25
--- Available faceplate colors
  • Metallic Blue
  • Metallic Red
  • Gold
  • Chrome Silver
  • Army Green
  • Clear
  • Black
  • White
  • Matte Silver
  • Pink

- Case Replacement $40 (installation only)
-- Case and installation $80
--- Available case colors

    * Clear
    * Clear Blue
    * Clear Black
    * Red
    * Black
    * Baby Blue
    * Green
    * Purple
    * Silver
    * Camouflage Green
    * Pink
    * Yellow
    * Brown
 

- LED swaps
-- Wifi,memory,power,charge $15
--- Available colors
  • Blue
  • Red
  • White
  • Yellow
  • Green

- USB charge mod $10

- Custom Firmware(Play Games on Memory Stick) $10



Repair Services

- LCD $60


Modding Example
My PSP
The Back of a PSP With LEDs in triggers and in Backplate



Subscribe to my Youtube page to see new mods as they come out

My Youtube Channel

<a href="http://www.youtube.com/cp/vjVQa1PpcFMA-lnyMLFZ7yf-iGbbxpXjzL1qT6xYWNc=" target="_blank" rel="noopener noreferrer" class="bbc_link bbc_flash_disabled new_win">http://www.youtube.com/cp/vjVQa1PpcFMA-lnyMLFZ7yf-iGbbxpXjzL1qT6xYWNc=</a>

Contact Information

Email - The4dpatrick@yahoo.com
msn - The4dpatrick@hotmail.com

References

I have many references from here on Acidmods, outside of Acidmods, and locally. If you would like to have info on my references to ask them questions or anything else you would like to know about my service i will give you their contact information.

TERMS & CONDITIONS

- Will Mod when I have the Time
- Payment is accepted in PAYPAL and Cash
- No REFUNDS for any reason at all.The mod(s) will be tested and guaranteed to work at time of shipment, and a video will be made before shipping.
- I am not responsible for any damage during shipping.
- Discuss service before the sending of PSP via IM, e-mail, or PM
- While Supplies last
- Payment for better and faster shipping is optional
- First Come First Serve



ACIDMODS IS NOT RESPONSIBLE FOR ANY MODS

THAT I DO OR ANY ACTIONS THAT I TAKE
« Last Edit: December 30, 2008, 01:15:06 AM by 4dP »

PINOY AKO

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: Modders For Hire Advertisements
« Reply #3 on: November 27, 2007, 07:49:12 AM »
MattZani

consoles modded

PS1 Mods
--- Case Sprayed Black
--- Laser Fixed
--- Controller Sprayed Black
Wii Mods
--- Controller Shells Swapped
--- Full Console TearDown, no mods though
PSP Mods
--- Case Swaps
--- Replacement parts fitted
--- Jewel Fitted

About You
Im 14, Live in the UK, have good soldering skills, but have never done any full mods, i'll carry out work for free, with Only Parts and shipping needed, although tips would be a bonus. I would prefer to take on Console Mods, not handhelds, purely for space reasons. Im a good Painter too, with basic paint jobs easy and and basic designs possible too.

CURRENTLY LOOKING A DS LITE JOB

Contact Information

Email - mattdear@f2s.com
msn - mattzani@hotmail.co.uk
PM Me!

Modding Example

Example 1
Custom made PSP Jewel Fitted. Would give my self a 3 out of 5, the hole wasnt perfect, and the Jewel wasnt great too *I WILL NOT BE SUPPLYING JEWELS, THEY MUST BE SOURCED THROUGH NEUBIT*


Example 2
Wii Faceplate Swap. Give my self a 5 out of 5, took about 10 mins, was very easy, and the Remote functioned perfectly (Would love to take up a full case swap)




Example 3
Black PS1. Took a Total of 1 days work, including purchasing parts. Give myself a 4 out of 5, did it outside, results werent perfect, but i now have a spray area indoors, so future jobs should be perfect.


Ready to be primed


Red Primer finished


Black pretty much finished


The Console


Pretty much everything Sprayed


The controller


The magazine style photo


It Actually Works!

T&C

put any terms and conditions you have here

- Mods will be carried out in spare time
- Buyer will pay shipping both ways
- Item cannot be refunded
- Item will be sent fully working (With Proof)
- Item MUST be working (unless its a fix, where the above T&C does not apply)
- I Reserve the right to not take on a mod i feel i cannot do, or remove the Refund Condition if you really want me to do it

ACIDMODS IS NOT RESPONSIBLE FOR ANY MODS THAT I DO OR ANY ACTIONS THAT I TAKE

« Last Edit: December 07, 2007, 10:11:57 AM by MattZani »
Retired Modder, minor dabbling from now on :P

Offline Timmy

  • Millennium Poster
  • *
  • Posts: 1155
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: Modders For Hire Advertisements
« Reply #4 on: February 25, 2008, 08:40:24 PM »
TimmyDX - You Know You Want It...

Consoles Modded Previously

DS Lites - LED's
            - LED Fader Deluxe
            - Pulse VU 2
            - Music Pulse
            - Case Swaps
            - Joysticks
            - Case Engraving
            - Reed Switch Security Mod
            - USB Controller Ports
            - USB Charge

Game boy Mono - LED's
                      - Music Pulse
                      - Additional Speakers
                      - Case Swap

Gamecube - Built in SD Media Launcher
               - Built In Wave Bird Reciever
               - LED's
               - Lino Style Jewels (Many Colours Available)

Misc - Digital Retrocon Sticks
       - Jewel Factory Employee

Spray Painting - Gamecube
                    - PS2 Controller
                    - DS Lite

PSP (Note: Done in release year but neve again, not familiar with psp internals anymore - Undiluted Platinum Modchip
                                                                                                                      - Faceplate Swap
                                                                                                                      - Trigger LED's

About Me

I am TimmyDX (aka XionDs in some of my videos) I have put up my modders for hire add before but removed it for personal reasons, but i still get asked so i thought id put back up.

I am me, i live in western australia and have just finished school. I have applied for further study but im having my gap year this year. As far as modding experience is concerned i was exposed to soldering and electronics at a very young age having a electrician for a dad. I started modding during the psp release year some time when i did the psp you see above. Unfortunately a wire came loose on the U.P. about a week after i closed it up shorting stuff and destroying it. But i made my return with my all time favourite console brand nintendo, since then i havn't looked back modding everything from calculators and gameboy monos to gamecubes and even my bass amplifier.

My other hobbies include music and spraypainting and extreme sports. My bass guitar is always by my side and my new shredding effects pedal, i love to spraypaint anything i can to give it a nice renewed look and me and my friends just enjoy adreniline rush.

Just get in contact me with any of the methods below and we can have a nice pleasant chat before we go anywhere, i am a very patient person and if you need time to get money together, or cant decide i will give it to you and respect your choice without begrudgement

I have been a member here for quite a while now and moved up to Research and Devlopment and Global Moderation, i have built many long term friendsships here and am an active member of the Acidmods Community. I am also a member of the Acidmods Jewel Factory team and will do jewels with your orders :D

Contact Information

Email - inferno980@gmail.com
MSN - inferno980@gmail.com
Phone - Disclosed for Now
PM Me - https://www.acidmods.com/forum/index.php?action=pm;sa=send;u=1470    

Modding Examples

For examples of my work you can check out my VideoPwnage Profile, i always make a video for mods

http://www.videopwnage.com/membervideos.php?uid=25

And i have a few high quality video tutorials in the video tutorial section ;)

https://www.acidmods.com/forum/index.php?board=307.0

T&C

Payment is ONLY done by Paypal or money orders from Selected Nations.

If you have an alternative method Please contact me via the above methods

If you have any further questions please contact me, i welcome your questions ;)

ACIDMODS IS NOT RESPONSIBLE FOR ANY MODS THAT I DO OR ANY ACTIONS THAT I TAKE

Offline sakobatoneko

  • MFH
  • Granny Spanker
  • *
  • Posts: 460
  • Post quality +0/-0
Re: Modders For Hire Advertisements
« Reply #5 on: April 25, 2008, 06:35:52 PM »
cesar

consoles modded

- PSP
led swap
led triggers
sound reactive triggers or where you want them
faceplate change
case change

About You

My name is Cesar I'm 15 years old i live at california. I started modding last year my soldering skills improve every time i use my soldering iron. i can mod other consoles if there is a tut. For now i can only mod in the us no outside countries.
Contact Information

Email - sakobatoneko@gmail.com
aim - sakobatoneko
website -  http://www.consolespot.net/forums/index.php.
phone - (USA) (714) 599 3080 (my cell) will not answer during school hours.

Modding Example
Faceplate

5/5

Led swap
video http://video.google.com/videoplay?docid=3663701964367439919&hl=en
5/5

Sound reactive leds



5/5

Case swap

video http://video.google.com/videoplay?docid=-1666538328432379454&hl=en
4/5

Usb charge
no pic sorry
5/5

slim psp: led swap and sound reactive led triggers



http://www.youtube.com/v/27U8ZlwNtfs

http://youtube.com/watch?v=NNPvW0jCPWg
4.5/5

and on the slim sound reactive led triggers put 5/5

T&C
- customer must pay shipping both ways
- once shipped to me it will take me a week to ship it back.
- will contact the customer to let them know the status of there psp.
-will take pics or video to show the owner how it turned out/ also to post.
- US order only
-  not reliable for what happens during shipping
- psp must be described as is before shipping.
- Contact me before shipping and get a tracking number


ACIDMODS IS NOT RESPONSIBLE FOR ANY MODS THAT I DO OR ANY ACTIONS THAT I TAKE
« Last Edit: July 17, 2008, 07:00:31 PM by 4dP »

Offline crashman2k7

  • Who Farted ???
  • *
  • Posts: 206
  • Post quality +0/-0
  • Gender: Male
Re: Modders For Hire Advertisements
« Reply #6 on: June 17, 2008, 01:15:34 PM »
Shawno Aka CrashMan2k7

consoles modded

- console:PSP
•   -USB MOD
•   -LEDS
•   -LED INDICATOR SWAPS
•   -SPEAKER
•   -CASE SWAP
•   -REPAIRS
•   -BUILD
•   -CUSTOM PAINT (EVEN THE SEXY COLOR CHANGING ONES FOR CASES)
•   -CUSTUM PAIN FOR TRIMS
•   -CUSTUM RING OF LIGHT
•   -SOUND REACTIVE SPEAKER/LM386
•   -REWIRING BUTTONS(KEY NOTE TO TURN ON YOUR PSP)
•   


About You

Hey Wasup its crash here, I am original from Quebec. I am French but now living in Ontario(Canada). My grammar suck I know. Got a diploma in Electronics and BSCH in Computer/networking techno.I am the type of guy that will Mod his psp from morning to nite and total forgot he had breakfast and a big plate of spaghetti  on the bed waiting for him.  Speak English French and some Spanish, I am a Caribbean descendent BRAP!(yes I sound white cuz no one understand ma Caribbean accent lol

Contact Information

Email – darowmeo@vif.com
msn – gtzfrenchcoolie@hotmail.com
aim – djst2cool
phone - (Canada) (1)647-2195556     

Modding Example

MY PSP 4.0
Full out bling mod
Basically everything you see i can do to a psp all in this 1 psp!
http://ca.youtube.com/watch?v=tovQzoELwbs


Basic Setup
Just basic 8 leds all around with sound reactive.
http://ca.youtube.com/watch?v=FYU40DHmRjg

picture and/or video of mod

CLEAN BLUE SETUP
BASIC CLEAR CASE SETUP CRYSTAL BLUE LEDS



T&C



1- I usual provide everything but if you want your work done faster and cheaper buy the equipment you want.
2- You pay shipping both ways.

ACIDMODS IS NOT RESPONSIBLE FOR ANY MODS THAT I DO OR ANY ACTIONS THAT I TAKE

« Last Edit: July 27, 2008, 10:48:16 AM by 4dP »

Offline Bhawan

  • E = MC²
  • *
  • Posts: 336
  • Post quality +2/-0
  • Gender: Male
Re: Modders For Hire Advertisements
« Reply #7 on: July 18, 2008, 07:16:04 PM »
Bhawan

Consoles modded

- PSP
--- Faceplate swap
--- Case Swap
--- Led Swap Power/Charge $10 WiFi/Memory stick $7 Each
--- Trigger LEDs Direct or with lm386
--- Button LEDs
--- Button Swap
--- USB Charge mod
--- MOBO Replacement (Mobo Must be provided)
--- LCD Screen replacement (LCD Must be provided)
--- Other LEDs where ever you want
--- Custom firmware + free homebrew of you choice
--- Custom Theme (Pimped out XMB) - Free if you get another hardware mod done
--- Converting battery to Pandora (only for fat battery model 110) Free
--- Making magic memory stick - Free (memory stick must be provided)

About You

Hi, I am 14 I live in Canada I have been modding for a long time.  I started modding when I was 9.  I started it from modding basic stuff like RC cars and then went on to modding PCs.  I mainly did software modding on PSPs but from some time I have been doing hardware modding.  I also software mod cell phones.  Modding takes a lot of my time but still I have a 95% average score in studies which is a good this :tup: .

Contact Information

Email – padabhawan@hotmail.com   
msn – padabhawan@hotmail.com , haunted-evil_geek@hotmail.com
aim -
phone - (Canada) (+1) 403 362 4428   

Modding Examples

Trigger LEDs
LEDs in the Triggers. I rate it 4/5

[youtube=425,350]GaKPfvctbeU[/youtube]

Clear Case and loads of LEDs
 This is my PSP with 6 Blue leds and a clear case and also usb charge i still have to do LED swap on this one. I rate it 5/5

[youtube=425,350]Hda5n9dKnB8[/youtube]

Just the clear Case & CFW
My friend’s PSP 4.01m33 and Clear FacePlate. Nothing much special though so 2/5

[youtube=425,350]i83XtpJVMiY[/youtube]

Sound reactive trigger & clear faceplate
PSP with sound reactive trigger LEDs and a clear Faceplate. Rating 4.5/5

[youtube=425,350]OEXp-gATlQ0[/youtube]

T&C

put any terms and conditions you have here

- All parts except LEDs are to be provided by you, if you want me to get them it will cost extra
- I will make a Video of the PSP after modding because I am not responsible for damages or PSP getting lost in shipping
- All mods should be discussed on MSN or by any suitable means before I mod.
- If I find any problems with your PSP BRFORE MODDING(example: stuck/striped screws) you will be informed about them.
- I accept paypal, cash(Canadian $)

ACIDMODS IS NOT RESPONSIBLE FOR ANY MODS THAT I DO OR ANY ACTIONS THAT I TAKE

« Last Edit: July 19, 2008, 10:18:56 AM by Bhawan »

thanks chase for this sig =)
I miss my dragon lol....

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: Modders For Hire Advertisements
« Reply #8 on: July 27, 2008, 12:24:00 PM »
Jumbo/Chris

Consoles Modded
- PSP Phat & Slim
--- Trigger Mod
--- Leds In Speaker Hole
--- Led under D-Pad
--- Led under Powerboard
--- Jewel Installed
--- Lighted Jewel
--- USB charge mod
--- Full Case Swap
--- Faceplate Swap
--- Wifi/Memory LED Swap
--- Power/Charge LED Swap
--- Button Swap
--- PSP Repairs
--- Hold Activated Triggers
--- Custom Firmware
--- Ring Of Light Mod

-Xbox 360
--- LED Swaps
---Rapidfire insall
---Controller Case Swaps

-PS3 Controller
---LED Swaps
---PS Button LED

- Wii
--- Nunchuck Leds
--- Led Swaps On Wiimote
--- Case Swaps on Wiimote
--- Case Swaps on Nunchuck


Other-
--- Pre-Cut PSP Phat Door- $15
--- Ring Of Light Door- $15
--- Wired Led- $2
--- PSP Phat Trigger Kit- $15

Note: IF THERES SOMETHING YOU DONT SEE HERE DONT BE AFRAID TO ASK IM ALWAYS UP FOR A NEW MOD!

About You

Hey there! My name is Chris and I live In New York. I am 15 and
been softmodding for about 2 years and Hardmodding for about
a year. I love modding PSP's and am great with a soldering iron
and dremel. I love Leds and making Awsome PSP's!

Contact Information

Email - gotjumbo911@yahoo.com
MSN - gotjumbo911@hotmail.com
AIM - gotjumbo911
Youtube- www.youtube.com/gotjumbo911

Modding Example's

<a href="http://www.youtube.com/cp/vjVQa1PpcFPpPFNRsGNOMAPAn8RQXpuigd6mYwKIFrE=" target="_blank" rel="noopener noreferrer" class="bbc_link bbc_flash_disabled new_win">http://www.youtube.com/cp/vjVQa1PpcFPpPFNRsGNOMAPAn8RQXpuigd6mYwKIFrE=</a>

T&C

-  Mods are Done in spare time I have a life and school
-  Customer Pays shipping both ways
-  I accept Paypal or Cash or Money Order
-  I AM NOT Responsible for what happens during shipping
-  Mods Guaranteed working before shipment
-  A Video will be made Before Shipment


ACIDMODS IS NOT RESPONSIBLE FOR ANY MODS THAT I DO OR ANY ACTIONS THAT I TAKE
« Last Edit: February 11, 2009, 10:33:23 PM by 4dP »

Offline treemty

  • l,,l METAL l,,l
  • Millennium Poster
  • *
  • Posts: 1231
  • Post quality +1/-0
  • Gender: Male
  • Will mod for food
    • the1337group.com
Re: Modders For Hire Advertisements
« Reply #9 on: October 09, 2008, 11:47:15 AM »
Avery C. A.K.A. treemty

consoles modded

- PSP
--- Case swap
--- Sound reactive leds in triggers, UMD drive and speaker holes
--- CFW 3.90 m33-3
--- USB charge
--- jewel installation
--- Clear umd drive(window)
- Xbox 360
--- Rapid Fire on seprate buttons(3 wire kit from AM)
--- Rapid fire on triggers

About You

I got into modding several years ago when i sold my xbox original and the person returned it ...without the warranty sticker!!! so then i did some looking around inside and swapped the hard drive with another one I had. I didn't do any mods until my friends showed me how to Pandora a battery then i found this website and I have been modding since. I live in silver spring Maryland(its not an actual city pretty much just zip code lol) just outside of the nations capitol D.C.(Washington district of Colombia) I am about to turn 14 and I basically mod in the little free time I have :)
Contact Information

Email - AveryChiasson@gmail.com
msn - AveryChiasson@gmail.com(I don't use it just for xbox live)
aim - treemty123
phone - (U.S.)(1)202-415-2933
Modding Example

Example 1
My psp phat
This psp was the first psp i modded with 10 leds all sound reactive clear shell and cfw it is not the best psp i know
3/5

http://www.youtube.com/watch?v=M3eZPpeqQ8E

Example 2
My other psp phat
I did this mod for a friend then he didn't want his psp anymore and he sold it to me !(btw it is for sale PM me)
blue sound reactive triggers clear jewel(not window) w/ 2 sound reactive green.
4/5




Example 3
My Rapid fire controllers
1 has 1st and 3rd player red and 2nd and 4th blue(looks like police)(halo 3 edition controller)
1 has all blue leds(black controller)
3 wire rapid fire on both
5/5(except black one has to be fixed so black one is 3/5)





services and pricing
-Pre-wired smd 0603 leds$3
-trigger-kits speaker-$15
-Precut UMD door $10 or w/ window(piece of plastic)$12
-cutting of your UMD door $5
--Rapid fire
-3 wire kit installation and parts $20
-rapid fire on triggers installation and parts $20
-Any painting/airbrushing for anything please contact me
-360 controller led swaps (please contact)
-360 controller shell swap service $5 service w/ parts please contact
-PSP shell swap $15 service
-w/ leds of any sort $20
-without shell on hand please contact
-Jewel installation $5 (w/ leds $10)
-Any parts removal Free as long as I get to keep it :tup: If I dont get to keep it please contact
-Pandora free hard mod or soft mod just pay s&h
-trigger led installation $10 any color or any way I.E. speaker hold power
-Any parts installed on hand $5-$20
-Any parts not on hand -please contact
-Rapid fire 3 mode with led indicator and rapid reload $45
-Rapid fire 3 mode on both triggers and led indication $40


I am willing to try any mod I have not already done


T&C

- I have a very packed schedule until end of 2008 so i will mod when i get home from school and may take a couple of days(contact for time estimation)
- If I break it I will replace it(when i receive console or whatever is being modded I will do a full hardware/softwaree check to make sure nothing is wrong so you cannot blame me!!!)
- I will usually ship within 2 days after finished mod
- I will also test for about an hour to make sure nothing happened during the modding process

ACIDMODS IS NOT RESPONSIBLE FOR ANY MODS THAT I DO OR ANY ACTIONS THAT I TAKE
« Last Edit: October 29, 2008, 07:25:33 PM by treemty »

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: Modders For Hire Advertisements
« Reply #10 on: February 11, 2009, 02:10:14 AM »
ApheX

Consoles

PSP
--- USB charge mod (£5)
--- Sound reactive triggers (£10)
--- Trigger Mod (£7)
--- Case Installation (£20, not including case)
--- PSP Repair (depends on the damage and parts needed)
--- Jewel Installation (£6)
--- Converting Charger to USB (£10)
--- Led fader Mod (£20)
--- Speaker Mod (£15)
--- Led indicator swap (£7)
--- Firmware Installation (free)
--- Photofast CR-3100 Mod (£40, not including memory)

PS3
--- Controller led indicator swap (£10)

About You

Hello! I'm a Console modder based in the UK. I started modding when i was around 8, started on portable tape players and gameboys, then in january of 2007 i got into firmware modding for psp's. After that i found acidmods which got me interested in psp hardware mods and i've been modding them ever since.

Contact Information

Email - your_mum_85@hotmail.co.uk
aim - ApheX
phone - (UK) (+44) 07921 905685   

Modding Example

Example 1
Typhoon's UV Modded PSP. This was one of my first psp i modded for a friend. I swapped the case for a clear one, added UV leds to the triggers and swapped the Led indicators to UV. i'd give this a rating of 3 out of 5.

http://www.youtube.com/watch?v=ncAfG-D03R8

Example 2
Black crystal/Blue PSP Slim. This was my own psp untill it was sold recently  :cry2:. This had alot of work done to it. Iswapped the case for a black crystal one, swapped the Led indicators to blue, added sound reactive leds to the triggers, added a led fader mod to the umd door and fitted a photofast cr-3100 memory mod in the UMD drive bay. Id give this a rating of 4 out of 5.

http://www.youtube.com/watch?v=f0LHB0jI5Gs

Example 3
Nightshade PSP Slim. This was made of the ShateredMods Jan Mod-Off. I like to think this is one of the best psp's i've modded (to the point of keeping it, lol). ok, so i swapped the case for a new OEM black one, added sound reactive leds to the triggers and UMD ring of light, added a led fader mod to the triggers and the ring of light, installed a speaker in the UMD door, installed a photofast cr-3100 in the UMD bay, custom painted a black trim and made a custom gameboot and cintro. I'd give this a rating of 5 out of 5 due to the mods added and the space limitations.

http://www.youtube.com/watch?v=-rLTBKEkHNw

Check out my PSP mods

<a href="http://www.youtube.com/cp/vjVQa1PpcFOEZYaCkVc8ZiaHhvD-4wnI0CTKkkuQM2Y=" target="_blank" rel="noopener noreferrer" class="bbc_link bbc_flash_disabled new_win">http://www.youtube.com/cp/vjVQa1PpcFOEZYaCkVc8ZiaHhvD-4wnI0CTKkkuQM2Y=</a>

T&C

- Uk/europe orders only, unless i approve (this is only because delivery outside europe can be rather expensive).
- No REFUNDS for any reason at all, all mods will be tested and guaranteed to work at time of shipment. By purchasing my services you agree that if anything happens to your console during the time of shipment I AM NOT responsible for what happens.
- Proof of work will be provided after completion.
- All buyers pay shipping both ways for the service.
- Discuss service before the sending of PSP via IM, e-mail, or PM.
- Payment is accepted in PAYPAL.
- First Come First Serve.

ACIDMODS IS NOT RESPONSIBLE FOR ANY MODS THAT I DO OR ANY ACTIONS THAT I TAKE

« Last Edit: February 14, 2009, 09:57:28 AM by ApheX »

Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
Re: Modders For Hire Advertisements
« Reply #11 on: March 11, 2009, 04:52:00 PM »
Sam Buckingham A.K.A KillDog
:drunk:

Hi guys im know im new on the forums of acid mods but thats mostly because ive been doing my first mods and havnt had alot of time to post so ill do it know.

Now all u modders must remeber your first mod you done and the excitement u got when u finished it and then getting the impulse to mod more well thats what i felt like anyways but ive got no more moeny to buy all my modding gear  like leds , cases , jewels , spray paint  and so on so ive been thinking for the last couple of days since ive finished my first mod  on ways of making money and ive only had one idea Repairing other peoples psps and and doing simple mods like led swaps and led triggers and more so im wondering if any one needs anything done so im offering these services if u wanna call it that.



consoles modded
Psp


Psp repairs:
 
screen replacements
fuse fixing
replacing facia
and other various part replacing

Psp Mods:

Leds in triggers
Leds infront of speakers (PHAT)
Leds in Umd door
Jewel installs (only if u send jewel with psp)
Case swaps
Buttons swaps
Custom firmware
Leds Swap on Wifi & Mem card (Not on powerboard yett as im not to familiar with it and havnt tryed it with my new detail soldering iron)

If you would like any of these things done then add me on msn and we can talk and sort a price out as i havnt set any prices yett so you could get a cheap deal.



About Me
Ive had a computer since i was 5 and have always been addicted to my computers & consoles but i also like electronics and have been messing around with electronics since i was born i even ust to take apart cams when i was like 3 and fiddle with them but i never learn how to put them back together so my mum was forever finding cams that fell apart when you picked them up lol
The reason i got into modding is  just simpley watching youtube videos and wondering if i could do it my self like sorta challenging my self to mod and with a little help from modders 4dP & Jumbo911 becauseif i ever got stuck they would help me get past any problems i had so thank you guys.

Contact Information

Email - Killdogzmail@yahoo.co.uk
msn - buckz07@hotmail.com
phone - (UK) (+44) 07588560374     

Modding Example

Example 1



I spent quite along time on this mod as i wanted to make it all look neat and tidy. (Im a perfectionist)               


My Rating 3.5/5

Thats the only pic ive uploaded atm i will upload more soon and hopefully a video aswell.

http://www.youtube.com/watch?v=JzG-GjqeDRw



T&C


You pay for P&P



ACIDMODS IS NOT RESPONSIBLE FOR ANY MODS THAT I DO OR ANY ACTIONS THAT I TAKE


xXxKillDogxXx
UK MODDER
« Last Edit: March 14, 2009, 08:53:24 PM by 4dP »

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Modders For Hire Ad Template
« Reply #12 on: April 14, 2009, 03:46:34 AM »
GhoSt_Death

Consoles modded

- PSP
---Sound Reactive leds Using LM386
---Rings of Light UMD Door Mod
---Mobo/Powerboard led swap
---SD card mod
---Sound Reactive rumble

- Xbox 360 controller
---3 mode sleeper rapid fire (Has a COD:WaW mode!)
---Led swaps
---555 Timer Adjustable Rapidfire Mod
---Dome LED

About Me

Hey my name is Steve, I am based in New Zealand, good for Australians, but will do work  for anyone in the world. I come from a background of electronics, and have been working with them for a while now. Joined acidmods jan 2008, and been modding Consoles ever since.

Contact Information

Email - stephen.iz.a.richardson@gmail.com
MSN - ghost-death@hotmail.com

Modding Examples

PSP phat
Quick mod, 2 lm386's, 8 leds, All leds swapped.
   
 

Xbox 360 controllers
A couple 360 controllers I've modded.


http://www.youtube.com/watch?v=Xv9CqrIbcSs#lq
 
Custom PC





Modding services
Psp phat:
-Leds (tell me what you wan't)
-ROL
-Jewel Installation
-Case swap
-Faceplate swap
-Button swap
-photofast internal

Xbox 360 controller:
-led swap
-rapid fire (3 mode sleeper)

Anything else you want don't hesitate to ask! I can also make kits for you to diy if you don't want to ship your console half way around the world.

T&C

put any terms and conditions you have here

- Paypal orders only. Buyer must keep in contact with me at all time.
- I take no responsibility for items lost/damaged in post, Option of getting them tracked will be offered for a small fee.

ACIDMODS IS NOT RESPONSIBLE FOR ANY MODS THAT I DO OR ANY ACTIONS THAT I TAKE
« Last Edit: April 14, 2009, 07:57:10 AM by Jumbo »
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline W-Gaming5

  • Millennium Poster
  • *
  • Posts: 1129
  • Post quality +1/-0
  • Gender: Male
Re: Modders For Hire Ad Template
« Reply #13 on: May 29, 2009, 07:34:50 PM »
W-Gaming5

consoles modded

- console 1: PSP
--- mod done 1: Sound reactive Leds  (Lighted triggers and Jewl. Can do In other places)
--- mod done 2: Case swap
--- mod done 3: PSP Repair (just pay for parts and small installation fee)
--- mod done 4: USB Charge Mod
--- mod done 5: LED Swaps
--- mod done 6: Jewl (I'll have to send it to someone to cut door because I have nothing to cut it with. PM me to get info on were to get jewls)

- console 2: DS Phat
--- mod done 1: Repair Broke Screen/Screen Ribbion

- console 3: DS Lite
--- mod done 1: Case Swap


About You
 
 If you go with me I will be the best choice with reasonable prices.

Don't Risk messing up and destroying your console. I'm starting to look into ps2 mods and other home systems. Impress your friends, and family, and be the coolest kid on the block with your modded System.

I'll will repair any systems for a reasonable price
(Game Repair = 40$ to replace psp analog Stick
Me = 5$ to replace and fix psp analog stick)

Contact Information

Email - Idiotdcw@yahoo.com
msn - None
aim - wynstonisbomb67
phone - (US) Pm me for info 

(Please add this to my exiting add.)

consoles modded

- console 1 PSP
--- mod done 1: Dual Nub
- console 2 DS
--- mod done 1:Led Swap

(Please add this to my exiting add.)

Modding Example

Example add onto example 2
Led Swap on a DS Phat. Simple but adds to the overall look of your DS. I give it 5 stars. Can do any color desired.



Example add onto example 1
Dual Nub on PSP phat. Takes A while but finishes with a great outcome! I have a Dremal now so I won't have to send it to anyone to cut it. I Give it a 4 out of 5 because I don't play many FPS Games and the faceplate stays up a bit (Every Dual nub is like that.)
(Ps:I did this with a broken faceplate so it was already scratched up and was messed up)

 








ALSO

Were i said

Quote
"--- mod done 6: Jewl (I'll have to send it to someone to cut door because I have nothing to cut it with. PM me to get info on were to get jewls)"

under consoles modded remove (I'll have to send it to someone to cut door because I have nothing to cut it with. PM me to get info on were to get jewls)

so it'll look like this
Quote
"--- mod done 6: Jewl"

Modding Example

Example 1
I give this mod a 4/5 because it works like new and only thing bad it no clear back plate. I got the psp broken for 30$ and repaired it and modded it. (I can do Any COLOR LEDs Desired.)
 
Psp Purple LED Mod
Final Modded PSP Purple LEDs and Lighted Jewl

Example 2
The top screen on DS phats break on a lot of people. I got my DS free and just replaced the 5$ ribbon. Its hard to find the ribbon needed. So I give this repair a 5/5 because I got a free DS out of it and it didn't take long to fix and works perfect now.

DS Screen Ribbion replacement.
(Perfect working DS after replacing broken screen ribbion)

Pic is just a regular DS Phat in perfect condition (Except A few scratches Thtat were on the ds when I got it.)


T&C

put any terms and conditions you have here

- term 1: You must pay for shipping to and from location.
- term 2: If You need a repair you must pay for the part and a small installation fee.
- term 3: If System is damaged beyond repair I will send back Part, System, and installation fee and tell you whats wrong with it.
(IF YOU BOUGHT THE PART AND SHIPPED IT WITH THE PART, YOU HAVE TO GET MONEY BACK FROM PEOPLE WHO SOLD IT TO YOU, NOT ME)
(Unless its a part i bought with money sent threw paypal then I send money back and I get money back for part)
- term 4: For repairs you can either ship console to me with part or send me money threw paypal to buy part.

ACIDMODS IS NOT RESPONSIBLE FOR ANY MODS THAT I DO OR ANY ACTIONS THAT I TAKE

« Last Edit: June 08, 2009, 03:57:54 AM by 4dP »
:censored:

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal