Author Topic: N3RDY's 10 mode Jitter + RF!  (Read 22068 times)

Offline jonnyhacks

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: N3RDY's 10 mode Jitter + RF!
« Reply #30 on: February 18, 2014, 12:23:45 PM »
hey nerdy could you help me out with the spaz jitter plzz i cant seem to find the right speed whats your setup ??

WHITE 4ND N3RDY

  • Guest
Re: N3RDY's 10 mode Jitter + RF!
« Reply #31 on: February 19, 2014, 07:32:11 PM »
Give me a little time and I'll PM u my settings for this. Its not 100% though. It sometimes skips when your over down weapons. It also requires running some special perks. I'll explain it all I'm a PM. Probably around the weekend or something.

Offline fevera1985

  • Chief squatting Hard
  • *
  • Posts: 18
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: N3RDY's 10 mode Jitter + RF!
« Reply #32 on: March 09, 2014, 01:01:49 PM »
Hey Nerdy, just to verify this wiring.
On the LB connection, is it one of the back solder points
or the one on the top of the LB ?

Here i made this image with different color arrows.
Blue, Red & Pink, witch one is it ?
Thanks...


WHITE 4ND N3RDY

  • Guest
Re: N3RDY's 10 mode Jitter + RF!
« Reply #33 on: March 09, 2014, 01:15:18 PM »
There both the same. U.can wire to the top of the tact or on the back of the solder point that's in your diagram. Just make sure its the lower solder point(blue arrow!). The upper one that's labled with the red arrow is a ground connection.

Sorry for the mix up. Rusty on my 360 connections. RDC listed the correct soldering terminals.
« Last Edit: March 09, 2014, 04:23:47 PM by WHITE 4ND N3RDY »

Offline RDC

  • Acid Modder
  • *
  • Posts: 742
  • Post quality +78/-2
  • Gender: Male
  • The CGnome Project
Re: N3RDY's 10 mode Jitter + RF!
« Reply #34 on: March 09, 2014, 03:38:42 PM »
Just make sure its the lower solder point(blue arrow!). The upper one that's labled with the red arrow is a ground connection.

Blue arrow is Ground, Red and Pink arrows are LB.
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline ardy521

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Acidmods User
Re: N3RDY's 10 mode Jitter + RF!
« Reply #35 on: March 20, 2014, 10:25:46 AM »
Nice looking project and programs. Kudos. I am interested in purchasing a couple of your boards. Can you send me a contact or ordering info?  Thanks in advance

Offline jonnyhacks

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: N3RDY's 10 mode Jitter + RF!
« Reply #36 on: July 29, 2014, 03:28:48 PM »
Hey nerdy could i see your mods setup i wont touch anything all just have a look a round  thanks

WHITE 4ND N3RDY

  • Guest
Re: N3RDY's 10 mode Jitter + RF!
« Reply #37 on: July 29, 2014, 04:56:51 PM »
Hey nerdy could i see your mods setup i wont touch anything all just have a look a round  thanks

Heres the link

http://www.acidmods.com/forum/index.php/topic,43401.0.html

I posted this some time ago in the pic programs section. Do what u want with it. Its all public now. I just tell everyone if u go editing my work u will just ruin it for others. If u have questions about the wiring just send me a pm and I'll walk u through what codes are wired where!
« Last Edit: July 29, 2014, 04:57:25 PM by WHITE 4ND N3RDY »

Offline jonnyhacks

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: N3RDY's 10 mode Jitter + RF!
« Reply #38 on: March 10, 2015, 10:17:25 PM »
hey I know its been long but I was just wondering if it would be possible for me to take a look at your sethsmod account aggain to see how you got the set upp for mw3 and ghost jitter .. you had gaven it to me b4 I just forgot thanks I wont touch anything ill jst use it as reference


nvm I found it
« Last Edit: March 10, 2015, 11:23:57 PM by jonnyhacks »

Offline JamesDal

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
N3RDYs 10 mode Jitter RF
« Reply #39 on: January 07, 2017, 12:56:29 PM »
I wanna create a thread for a user mode process through kernel mode driver, how do i implement this?