Author Topic: HexCreator - Quickly make your rapid fire hex code!  (Read 18773 times)

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
HexCreator - Quickly make your rapid fire hex code!
« on: August 23, 2013, 06:12:44 AM »
**************************************************************************
***UPDATE***
Apparently the XBox One Slim controller did not like the code I was generating. I had to adjust some timing values. I have a fix for XBox One Slim but you have to choose that option when you compile on the website.

Hit me up if you still have problems.
**************************************************************************

Guys,
  I made the tool that I use to generate rapid fire hex code free to the public.

http://www.diymods.work

The code works on all four controller types (CG, CG2, Matrix, and Matrix2). It supports controlling the two triggers and also two buttons of your choice. (For Matrix/2 controllers you will still need something like a 2N3906 to control the buttons.) Having the buttons gives you options like Drop Shot, Jitter, Jump Shot, etc.

There are over 30 prebuilt modes to choose from, or you can create your own modes.

Don't forget to check out the Resources section on the website for User Guides, Operating Instructions, Schematics, etc.
http://www.sethmods.com/index.php/resources

           Thanks,
                Seth
« Last Edit: November 22, 2017, 02:21:17 PM by SethMods »

Offline Gizmo613

  • MFH
  • Acid Modder
  • *
  • Posts: 547
  • Post quality +17/-0
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #1 on: August 23, 2013, 06:24:23 AM »
Wow, Whats The Reaso. For It Being Free Now? Also This Is For The 12f683 Correct.

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #2 on: August 23, 2013, 06:36:29 AM »
Right. 12f683. And XBox360 controllers...which was implied but not explicitly stated.

So...yeah, free.

Well I used to charge $200/yr for this subscription, and that was largely based on the enormous amount of time that I had invested in it. It looks simple on the front-end, but it was a complete mess to do all this on the back-end.

Last fall I got a new job that keeps me hopping all the time. I just don't have time now to run a modding company anymore. At the same time after all the effort I put into this I don't want it to just go to waste.

So, yeah. I hope it's useful.

            Thanks,
                Seth



Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #3 on: August 23, 2013, 06:42:39 AM »
Thanks Seth,  :tup:

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline ViSioNXx

  • Global Moderator
  • Granny Spanker
  • *
  • Posts: 381
  • Post quality +6/-0
  • Gender: Male
  • PC Guru
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #4 on: August 23, 2013, 10:08:54 AM »
Holy Crap!! you are a lifesaver!!!

WHITE 4ND N3RDY

  • Guest
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #5 on: August 23, 2013, 12:49:23 PM »
Sometime in the next month or two im going to post opensourse hex files' bassed off Seth's build your own mode software! Using my knowlege of macro software and understanding how button canclers, timelines & speed editing works, Im going to make cutting edge mods u cant find anywhere except on the viking macro controller.

I have a data base of Insane mods and what I hope to achive will be COD based mods such as turbo knives / riots. Different settings will include patch buster online for MW2, LB cancler method for BO2, BO turbo knife & MW3 knives / riots. BO2 knives will also be taylored around perks such as fast hands and without fast hands. I will try to also make them have the ability to rapidly press the melee over and over without it glitching out. I plan to also have XYY jitters, hybrid optic glitches for BO2 (makes burst riffles full auto using the hybrid optic sights) and a very special XY, RT RF jitter (sequences are pressed at the same time) that will shoot BO2 burst weapons at full auto with the ability to aim in without the LT kicking back!

Im in the process of building a protype controller that will have 3 external 8 pin sockets all wired to different pinnout on the 360 controllerboard that will allow me to test my settings so I can re flash the chips to dial the settings just right.  In the schmatics ill include tactical or default user solder pinouts. I can only work with the limitations of the software builder. So far from what ive studied this all looks promissing.

Keep a open eye in the next couple of months and hopfully I can bring this community some top notch opensourse hexs' that u cant find anywhere else but a macro controller brought to u on a 12f683 chip!

Offline standard85

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #6 on: October 07, 2013, 06:34:55 PM »
thanks seth, keep my name and PM me if you do something for the next gen systems. I will pay a good amount for a hex code generator or anything that has to do with rapid fire and additional modes.

Offline stevenagebenwhite

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #7 on: October 09, 2013, 04:40:58 AM »
Seth this is fantastic ! , the only thing I need to know now is a diagram where to wire and once I download the hex how do I combine the hex/ modes etc into 1 hex , very sorry to sound stupid , please can you advise?

thank you very much for this and your time

Ben

Just read all of your post and answered my own question! , also I would like to donate as you have invested in this and I would like to show my thanks. Ben


[mod]Use the EDIT button. Do not double post.[/mod]
« Last Edit: October 09, 2013, 05:51:41 AM by ViSioNXx »

Offline Xalcker

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #8 on: April 07, 2014, 08:22:55 AM »
Hello, Firt of all thankyou for the Hexcreator it is really impressive.
My question: Is it possible to create a "Perfect Active reload" for Gears of War with this Hexcreator (I asume you can use 1 or 2 buttons wired to RB) but I canĀ”'t find how to start a mode with 1 or 2 buttons.

Thankyou.

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #9 on: April 07, 2014, 03:41:24 PM »
Tie LT from the mod to RB and then flip the action. Since triggers work opposite, saying LT Release is the same as saying Press RB (in this case).

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #10 on: August 18, 2015, 05:37:10 PM »
Sorry to bump such an old thread. I am having trouble with my old domain and am switching to a temporary one.

http://diymod.work/

Offline snowcolt17

  • Local Moderator
  • Acid Modder
  • *
  • Posts: 552
  • Post quality +16/-1
  • Gender: Male
  • If all else fails, reflow it
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #11 on: August 18, 2015, 05:49:30 PM »
thanks alot Seth. this will help alot of people out.

Do you take any donations?


WHITE 4ND N3RDY

  • Guest
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #12 on: August 18, 2015, 07:18:22 PM »
I second what snowcult17 says. Thank u so much for this :-) this will defenantly help many out!

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #13 on: August 19, 2015, 04:17:11 AM »
I will have to setup the donation button again. It pointed to the old domain email.

We can try. It was definitely a big reason why it went down in the first place.


***Update: I added a Donation button to the home page.
« Last Edit: August 23, 2015, 08:27:07 PM by SethMods »

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #14 on: October 25, 2015, 06:15:26 PM »
All,
  I have added XBOX ONE support to the Hexcreator website and removed the 10 mode restriction that existed before.

If you try it out let me know how it goes.

http://www.diymods.work/hexcreator/

WHITE 4ND N3RDY

  • Guest
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #15 on: October 25, 2015, 07:45:21 PM »
Are these for 12f683 or 12f1822 microchips?

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #16 on: October 26, 2015, 05:47:27 AM »
Yeah, sorry, good question.

For XBox 360 it is the PIC12F683.
For XBox One it is the PIC12F1822.

Offline deadvirus

  • Guppy
  • *
  • Posts: 4
  • Post quality +1/-0
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #17 on: December 02, 2015, 07:29:29 PM »
Yeah, sorry, good question.

For XBox 360 it is the PIC12F683.
For XBox One it is the PIC12F1822.

Are there any other compatible microchips I can use in place of PIC12F1822 for the XBOX ONE?

WHITE 4ND N3RDY

  • Guest
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #18 on: December 02, 2015, 09:01:17 PM »
Not with sethmods xb1 hex creator. Now if your using his Xbox 360 hex creator for 360 controllers u can use 12f683 microchips.

Offline deadvirus

  • Guppy
  • *
  • Posts: 4
  • Post quality +1/-0
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #19 on: December 04, 2015, 08:52:22 AM »
Thank you for such a quick reply Sir!

Offline bestmoy

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #20 on: January 06, 2016, 02:45:37 PM »
Hi, great sethmods work by the  hexcreator, I have a problem when I install the chip, the B button remains always acting, if I remove the ground wire from the chip controller returns to working demo properly, my command is CG2 and have used the guide Installation Instructions (CG Controller Using A / B).
thanks

Offline coolshrimp

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #21 on: January 07, 2016, 05:23:37 PM »
I will have to setup the donation button again. It pointed to the old domain email.

We can try. It was definitely a big reason why it went down in the first place.


***Update: I added a Donation button to the home page.

I wouldn't mind hosting this project on my site and can also update the frontend interface.
www.CoolshrimpModz.com

Offline Bruno Souza

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #22 on: January 22, 2016, 11:10:20 PM »
Hello all well
I am having problem with my codes you help me?
when he put the B is triggered and other modes product does not work ? has a specific diagram or a model already seguir.desde thank Seth
Bruno Souza

Offline fuOp

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #23 on: July 20, 2016, 08:44:26 AM »
Hello people.  link hex creator out?
« Last Edit: July 20, 2016, 08:44:57 AM by fuOp »

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #24 on: September 24, 2016, 09:54:29 AM »
Sorry. It's back online at www.diymods.work

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #25 on: September 29, 2016, 09:04:06 AM »

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline Cerberus2808

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #26 on: January 16, 2020, 03:32:14 AM »
Hi all,

if there a kind of offline solution??? hexcreator offline maybe as exe-file? :whoosh:

Offline ch129012

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #27 on: April 05, 2020, 10:52:39 AM »
Seth Can you or anyone repost a working link please. Thank you.

Offline Cerberus2808

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: HexCreator - Quickly make your rapid fire hex code!
« Reply #28 on: July 31, 2020, 05:54:03 AM »
Hi guys is there a new link right now??? I see no answer...sry :beg: :beg: :beg:

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal