Author Topic: Halo recon helmet Pepakura model/sculpture  (Read 5393 times)

Offline FOOKz™

  • Hardware Modder
  • Research & Development
  • E = MC² Mad Scientist
  • *
  • Posts: 2070
  • Post quality +37/-2
  • Electronics Expert Electrical Engineer
Halo recon helmet Pepakura model/sculpture
« on: June 16, 2013, 06:13:29 PM »
I have been working on this for a few hours every weekend since November 2012.

Number of hours put into it from start to finish: about 350 hours


I have other photos of this with my name and time-stamp.


[spoiler][/spoiler]

[spoiler][/spoiler]

[spoiler][/spoiler]

[spoiler][/spoiler]

[spoiler][/spoiler]

[spoiler][/spoiler]

[spoiler][/spoiler]

[spoiler][/spoiler]

[spoiler][/spoiler]
« Last Edit: June 20, 2013, 12:40:04 AM by FOOKz™ »

Follow my Instagram and subscribe to my YouTube

Offline toadzilla

  • Moderator
  • Millennium Poster
  • *
  • Posts: 997
  • Post quality +132/-0
  • Gender: Male
  • something something Tech support
Re: Halo recon helmet Pepakura model/sculpture
« Reply #1 on: June 16, 2013, 10:07:48 PM »
way too much time on ur hands lmao

Offline FOOKz™

  • Hardware Modder
  • Research & Development
  • E = MC² Mad Scientist
  • *
  • Posts: 2070
  • Post quality +37/-2
  • Electronics Expert Electrical Engineer
Re: Halo recon helmet Pepakura model/sculpture
« Reply #2 on: June 17, 2013, 10:16:48 PM »
way too much time on ur hands lmao

yeah man totally

Follow my Instagram and subscribe to my YouTube

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Halo recon helmet Pepakura model/sculpture
« Reply #3 on: June 17, 2013, 11:07:58 PM »
Awesome work Fookz keep up the good work , and yes you have way too much time on your hands....lol  :tup: at least your creative with your time

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline PsychoticWolf

  • C.H.A.O.S Where art Thou.
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 2045
  • Post quality +27/-0
  • Gender: Male
  • Team CYBER
Re: Halo recon helmet Pepakura model/sculpture
« Reply #4 on: June 19, 2013, 12:54:06 PM »
When you can do something like this.  with just a few hours every weekend I call that.... Freaking awesome. Good Work F00Kz that is pretty great.

For the awesome Sigs Thanks goes to: Blazinkaos, Chef Boyardee
O o
/¯/________________________/
{ IMMA FIRIN' MA LAZAAAAAR!!!!!!
\_\¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯\
RyanF: lol im not that sick.  I don't feel like licking the s*** off a 40 year old guy's ass
RyanF: you want me to lick your crusty old buns dont you?
2/20/2012 at 08:55:34 PM

Offline Tracey

  • That Blonde Bitch
  • Granny Spanker
  • *
  • Posts: 369
  • Post quality +19/-0
  • Gender: Female
  • Save all the bunnies!
Re: Halo recon helmet Pepakura model/sculpture
« Reply #5 on: June 19, 2013, 01:16:35 PM »
When you can do something like this.  with just a few hours every weekend I call that.... Freaking awesome. Good Work F00Kz that is pretty great.

I 2nd this!
*****Kokomo won't play your games!*****


Offline FOOKz™

  • Hardware Modder
  • Research & Development
  • E = MC² Mad Scientist
  • *
  • Posts: 2070
  • Post quality +37/-2
  • Electronics Expert Electrical Engineer
Re: Halo recon helmet Pepakura model/sculpture
« Reply #6 on: June 19, 2013, 11:19:42 PM »
Thanks.


The inside liner is going to be foam and gore-tex for padding. The rim around the neck will have a latex tubing bladder held with SiliconeRubber-impregnated carbon fiber wrapped with gore-tex. I will pump air into the latex bladder so the helmet fits tight around my head to keep it from moving when i'm playing paintball/airsoft.

The two side holes are air intake holes for centrifuge fans in a laptop (brand new, obviously cuz that would be gross breathing in old computer dust lol). Then I will have 2 air vent holes in the back, same types of fans but they will be vertically facing at a higher RPM.

I am going to upgrade the visor from a silver-painted lexan sheet to a purple motorcycle helmet replacement visor.

lastly I have a bluetooth microphone I would like to use in it however I need to figure out how to interface the mic with some kind of controller to convert the signals to pure analog to use with a walkie-talkie. Arduino sells bluetooth kits; I will probably use one of those.



I think blue will be my color of choice... like ultramarine blue or phthalo blue. What do you think?
« Last Edit: June 20, 2013, 03:45:11 AM by FOOKz™ »

Follow my Instagram and subscribe to my YouTube

Offline PsychoticWolf

  • C.H.A.O.S Where art Thou.
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 2045
  • Post quality +27/-0
  • Gender: Male
  • Team CYBER
Re: Halo recon helmet Pepakura model/sculpture
« Reply #7 on: June 20, 2013, 02:57:48 AM »
Thanks.


The inside liner is going to be foam and gore-tex for padding. The rim around the neck will have a latex tubing bladder held with silicon-impregnated carbon fiber wrapped with gore-tex. I will pump air into the latex bladder so the helmet fits tight around my head to keep it from moving when i'm playing paintball/airsoft.

The two side holes are air intake holes for centrifuge fans for a laptop (brand new, obviously cuz that would be gross breathing in old computer dust lol). Then I will have 2 air vent holes in the back, same types of fans but they will be vertically facing at a higher RPM.

I am going to upgrade the visor from a silver-painted lexan sheet to a purple motorcycle helmet replacement visor.

lastly I have a bluetooth microphone I would like to use in it however I need to figure out how to interface the mic with some kind of controller to convert the signals to pure analog to use with a walkie-talkie. Arduino sells bluetooth kits; I will probably use one of those.



I think blue will be my color of choice... like ultramarine blue or phthalo blue. What do you think?

SHUT UP AND TAKE MY MONEY! that would be so badass, You got me excited and its not even mine.

For the awesome Sigs Thanks goes to: Blazinkaos, Chef Boyardee
O o
/¯/________________________/
{ IMMA FIRIN' MA LAZAAAAAR!!!!!!
\_\¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯\
RyanF: lol im not that sick.  I don't feel like licking the s*** off a 40 year old guy's ass
RyanF: you want me to lick your crusty old buns dont you?
2/20/2012 at 08:55:34 PM

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal