Author Topic: GC Controller (Wireless) PCB Scans, Wavebird  (Read 2692 times)

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2585
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
GC Controller (Wireless) PCB Scans, Wavebird
« on: February 01, 2013, 10:47:09 PM »
A few scans of the Wavebird GC Controller PCB.

Note: The Wireless module is not shown here as there are 2 versions that I'm aware of. When I have both done up I'll update this with them.

Top of the board, all thru hole components removed.


Top side with components removed and traces exposed. 50/50 composite from top side clean scan, so all traces can be seen, but also what their reference designations were.


Bottom side the same
« Last Edit: June 09, 2021, 08:35:51 PM by RDC »
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal