« previous next »
Pages: [1]   Go Down

Author Topic: GC Controller (Wired) PCB Scans  (Read 3535 times)

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2594
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
GC Controller (Wired) PCB Scans
« on: February 01, 2013, 10:45:11 PM »
A few scans of the wired GC controller.

Top of the PCB, all thru hole components removed


Top side with components removed and traces exposed. 50/50 composite from top side clean scan, so all traces can be seen, but also what their reference designations were.


Bottom side the same
« Last Edit: June 09, 2021, 08:36:16 PM by RDC »
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal