Well I've had an awful lot of people asking me about this one, so I thought I'd put up a short clip of what I have now. This is still very much the testing faze and not full functional yet. But we have made quite alot of progress an discovered enough to be able to say that this is something that will happen in the very near future.Full props go to cyberpyrot an Neubit (where you at man?), without them this would not have been possible.Any way enough reading hit the vid <object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/Eaw92t-bnqw"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/Eaw92t-bnqw" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed></object>
We are now working on a better thinner joystick called the Razor 2 After waiting forever to get the proto's from neubit we had a brain storm and figured out a way to make it thinner and perform better the board that you hve seen will be scrapped for the new design..Ask your questions here:- http://www.acidmods.com/forum/index.php?topic=5022.0
You may now reserve the most wanted board. We are now in the process of getting them mass produced. Remeber these boards are unlike the razor boards. They are multi layered PCB's. We designed them that way to make instalation flawless. you can now solder the wires to the bottom of the board.For Reserves Contact info@coolmods.co.uk Please include in the subject "reserve" price will be $25 but there is no need to pay in advance you pay when ready to ship.Remeber this is of limited quantity so make sure you send an email reserving your PCB...Also keep in mind these boards can be used for the DS and the Wii Mote
