Author Topic: Xbox 360 red tiger controller[dropped out] (Read 15918 times)

toadzilla · « **on:** July 31, 2011, 06:04:58 PM »

Red tiger Xbox 360 controller with see though where the red paint would be the abxy will have either bullets or are see though with
Red led shine thought or as a back light rapid fire. See though dpad with light shineing though or. Bullet with red back light red rol and red Back light on the rb and lb buttons with a red glow from the micport. I'll throw the stock picture on when i get home because I'm at a campsite tonight till tomorrow at noon

Rodent · « **Reply #1 on:** August 08, 2011, 07:44:34 PM »

I see no one has posted here but , they all think I have some evil trick or holding out on what I am up to, well now guess we all have little secrets hiding in the dark

good luck toad I know you will do well

1TONpete · « **Reply #2 on:** August 14, 2011, 05:49:40 PM »

The bomb just got dropped...

kronosslayer · « **Reply #3 on:** August 14, 2011, 06:35:57 PM »

Quote from: 1TONpete on August 14, 2011, 05:49:40 PM

The bomb just got dropped...

So has my jaw

To me it resembles GOW somehow. But a very good looking case!!

Rodent · « **Reply #4 on:** August 14, 2011, 06:58:25 PM »

BADASS looking nice job denali/1TONpete

Monk3y · « **Reply #5 on:** August 14, 2011, 07:19:10 PM »

wow that is amazing! A lot of effort looks put into that :P

toadzilla · « **Reply #6 on:** August 14, 2011, 08:16:14 PM »

once i recieve it ill wire it up since thats the start of my controller im still in awwe at how amazing my idea turned out

1TONpete · « **Reply #7 on:** August 28, 2011, 05:55:43 PM »

update pics....

Modded Matt · « **Reply #8 on:** August 28, 2011, 06:45:03 PM »

how did you get he see through effect? it looks cool in the light

crazy-modder · « **Reply #9 on:** August 28, 2011, 06:48:09 PM »

Quote from: modded matt on August 28, 2011, 06:45:03 PM

how did you get he see through effect? it looks cool in the light

Looks like he cut all the slits then made a red resin filler or something close to it. Probably taped the underside of the slits and filled em in with the resin. Idk though lol thats my though.

Rodent · « **Reply #10 on:** August 28, 2011, 06:54:07 PM »

Its Magic!!! ...lol

Modded Matt · « **Reply #11 on:** August 28, 2011, 06:56:49 PM »

no way think of how hard that would be... I know how I would do it, just curious of how it was done here.

I would just use a red transparent case and tape off the stripes painting the un-taped surface white then remove the tape and clear.... but thats just me.

crazy-modder · « **Reply #12 on:** August 28, 2011, 07:02:56 PM »

Quote from: modded matt on August 28, 2011, 06:56:49 PM

no way think of how hard that would be... I know how I would do it, just curious of how it was done here.

I would just use a red transparent case and tape off the stripes painting the un-taped surface white then remove the tape and clear.... but thats just me.

lol yeah, thats what i would have done too dude. But this is what it looks like he did. I swear it looks like some type of filler.

Rodent · « **Reply #13 on:** August 28, 2011, 07:03:28 PM »

Your way would be alot easier matt, but denali(1TOnpete) is doing it with acrylic which is alot harder todo, but they are trying to come up with something new for other things and show different mod technics , which is kind of cool, controller is probably the hardest way to show it, but they proved it could be done. will be cool for some case mod ideas i have in mind later .

nEoVaLoR · « **Reply #14 on:** August 28, 2011, 07:17:17 PM »

That is freaking boss!!!!!!!!!!!!!!!!!!!!!!!!!! I love it!!

toadzilla · « **Reply #15 on:** August 28, 2011, 07:54:10 PM »

he cut the stripes then used liquid plastic with red die to fill the holes i came up with the idea

heres what it looked like before the plastic filling

Phantom · « **Reply #16 on:** August 28, 2011, 11:56:08 PM »

that is crazy

painting over a clear case wouldnt look as good as this... this is a step up.

did you take a mold of the stock controller beforehand? and then pour the resin? no way you did that with tape

1TONpete · « **Reply #17 on:** August 29, 2011, 07:22:09 PM »

Hey guys Im back after the "storm" . Anyways , I know I could have just used a red transparent case etc... But no way would I have gotten these results. This is also , like Rodent said a proof of concept. Look for "HUGE!" things to come from this mod. The Tiger stripe or shredded controller design is simple but not to simple. It had its challenges , like around the analogs and making sure I did not cut where I was not supposed to.
See I can do a lot with acrylic and now that I know for sure I can mold it into a controller and have not just good but great results... It is on like kong. My Gears controller might not make it into competition this time around but look out fall for the gears 3 matching set controller and box. I might even do one for myself based off MW3 and "Ghost" theme. As a matter of fact I will do a MW3 "Ghost" themed one. Depends on if I come back to the box or not.

wetfusion · « **Reply #18 on:** August 29, 2011, 07:30:09 PM »

this is awesome, definitely what 'stand out' is all about! pushing your limits and skills.

cant wait to see the finish product dude!

1TONpete · « **Reply #19 on:** August 29, 2011, 07:32:01 PM »

Thanks Wetfusion and everyone else for their support... BTW I have a surprise for Toad for the back you guys are gunna

.

Rodent · « **Reply #20 on:** August 31, 2011, 03:09:15 AM »

Looking really good there, Nice work and great Idea, its defently cool, to see something new come out, gonna be a tuff competitions alot of good work from you toadzilla and many others good luck cant wait to see it finished Great job!!

laxboy · « **Reply #21 on:** August 31, 2011, 06:39:19 AM »

THis is Crazy beyond

1TONpete · « **Reply #22 on:** August 31, 2011, 02:56:28 PM »

More BOMBS

GhoSt · « **Reply #23 on:** September 01, 2011, 01:00:28 AM »

Wow that is seriously awesome, if you manage to fit it back together that's going to be one legendary controller.

toadzilla · « **Reply #24 on:** September 01, 2011, 01:35:58 AM »

i may be bad at soldering but i got some great ideas when it comes to this

the batterey compartment wasn't my idea ill just point that out

Rodent · « **Reply #25 on:** September 01, 2011, 02:59:56 AM »

This has become an interesting controller will be one to watch, towards the end of the compettiion, with 12 days left the competition, of people trying to get things done in time will be a major rush and people trying to get there finishing touches perfect is making this even better. Great Job 1TONpete and helping others out in this really shows team work.

Toadzilla got one of the badest controllers out there I think. Nice work guys keep it up.

toadzilla · « **Reply #26 on:** September 01, 2011, 03:03:13 AM »

Quote from: Rodent on September 01, 2011, 02:59:56 AM

This has become an interesting controller will be one to watch, towards the end of the compettiion, with 12 days left the competition, of people trying to get things done in time will be a major rush and people trying to get there finishing touches perfect is making this even better. Great Job 1TONpete and helping others out in this really shows team work.

Toadzilla got one of the badest controllers out there I think. Nice work guys keep it up.

thanks rodent i've recieved alot of local attention also alot of people thinking im selling it for 15 bucks im like HAHAHAHAHAHAHAHAH im not selling this i've recieved three offers of like 20 bucsk for the shell and i was like uhh no if anything its going in to the 100's

Rodent · « **Reply #27 on:** September 01, 2011, 03:06:00 AM »

welcome, well if they think the controller is that good just the shell wait till its finished,, yours is gonna be tough to beat . I know what i got going is a "DECENT" modded controller but this gonna be tough to beat in the end

toadzilla · « **Reply #28 on:** September 01, 2011, 03:10:01 AM »

Quote from: Rodent on September 01, 2011, 03:06:00 AM

welcome, well if they think the controller is that good just the shell wait till its finished,, yours is gonna be tough to beat . I know what i got going is a "DECENT" modded controller but this gonna be tough to beat in the end

yeah im thinking of pulling a bigger one for the fall and try to do it myself a whole set of controllers and a console and controller for xbox i haven't decided yet i've just been sitting here and thinking of what to do to step it up personally it was originally a concept i came up with 1TON one night on skype we came up with three different concepts as we talked though the night he reveled one the other day with the bullets inside the abxy so it kinda is see-though and another concept with is staying between me and him for now we seem to come up with alot of concepts with our talks on skype alot i may have another idea for this controller with i will start one it gets here to bring it up a step for myself and to make it truly a unique controller

1TONpete · « **Reply #29 on:** September 05, 2011, 04:27:43 PM »

Last piece to the puzzle...

The one piece of the "A" in Toad broke off . I put it back in the pour... Still need to sand and polish to get it to look like the front.

News:

Author Topic: Xbox 360 red tiger controller[dropped out] (Read 15918 times)