Author Topic: PS3 pin outs mobo's/power supplies all types  (Read 21253 times)

Offline 1TONpete

  • Millennium Poster
  • *
  • Posts: 1224
  • Post quality +47/-2
  • Sony specialist
PS3 pin outs mobo's/power supplies all types
« on: April 05, 2011, 08:56:04 AM »
              I want to start a thread to gather information on all pin outs on ps3. EX AV, power , hdd/wifi light, fans, etc.
             I would like to collect as much info in one place as I can on this subject for all the different types of Ps3's. I will personally test pin outs on the ps3's I have or get access to and post pics with color coded pin outs.  Right now the only test subject for me is a cechL01. Any one with info and or pics please feel free to post. I would like to keep a standard color code for pin outs though, once a standard is in place. please no questions yet, as this will be a place to get answers once the info is collected.

Offline 1TONpete

  • Millennium Poster
  • *
  • Posts: 1224
  • Post quality +47/-2
  • Sony specialist
Will update as more testing is done.
Update :New pic with fully tested pin outs.

notes : the 6v tested varied between 5v and 6v peek. But I was using an old tester I found in my closet because my digi is missing.
Pic for fan and 12v coming l8r today.
here you go pic of fan pin outs.
« Last Edit: April 12, 2011, 08:45:15 AM by denali31004 »

Offline FOOKz™

  • Hardware Modder
  • Research & Development
  • E = MC² Mad Scientist
  • *
  • Posts: 2070
  • Post quality +37/-2
  • Electronics Expert Electrical Engineer
Re: PS3 pin outs mobo's/power supplies all types
« Reply #2 on: April 06, 2011, 04:34:08 PM »
just by looking at the wire gauge seems the max current output of that 12V spot is 2A maybe less. that's a 24 Watt power output which is a lot of heat.

I believe that you probably can find the following power points in a PS3:
1.8v
3.3v *
4.5v
5v *
7.5v
12v *

I starred* the points that are usually standard in any system or computer.

Follow my Instagram and subscribe to my YouTube

Offline interceptor1985

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PS3 pin outs mobo's/power supplies all types
« Reply #3 on: November 29, 2011, 05:42:33 AM »
Sorry its my first post in a old topic, but I need power supply information for my custom build I'm going to be using a hacked atx power supply as a permanent replacement for the Sony power supply I found information on the ATX pin outs but hardly anything on the ps3
here is a link to the diagram of the atx plug I will be hacking for the build... http://i15.servimg.com/u/f15/13/35/92/26/pwr_su10.png

I'm going to be using a 60gb ps3 cecha01 as a donor for my build My goal is to have the ps3 working like stock inside the BTX computer case.

Offline 1TONpete

  • Millennium Poster
  • *
  • Posts: 1224
  • Post quality +47/-2
  • Sony specialist
Re: PS3 pin outs mobo's/power supplies all types
« Reply #4 on: November 30, 2011, 04:10:23 AM »
Well first let me say welcome dude. You are in luck as I have a 60gig that I have not done pinouts on. But if all you want to do is swap power suplies,  the pinout for the power supply are the same. I forgot about this thread, I got 3 different version ps3's that have not been pinned out yet.
One question about your mod. Doesn't pc power supplies need a loop back to the pwer supply from the mobo to turn on?

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: PS3 pin outs mobo's/power supplies all types
« Reply #5 on: November 30, 2011, 04:36:23 AM »
You can accutally jumper the atx power supply and it will come on so you can use it as a normal power supply full 12 volts and 5 volts all the time.

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline interceptor1985

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PS3 pin outs mobo's/power supplies all types
« Reply #6 on: November 30, 2011, 04:53:13 AM »
I have seen the jumper method, and used it to test psu's...I'm actually hacking away any unused wires and leaving only those that can make the ATX operate just like the stock Sony psu (just with a lot more power available) I'm just a lil confused on the unlabeled white wires on the stock psu....

Edit...I need new glasses..lol I just re read your post saying the pinouts are the same.
« Last Edit: November 30, 2011, 05:03:53 AM by interceptor1985 »

Offline 1TONpete

  • Millennium Poster
  • *
  • Posts: 1224
  • Post quality +47/-2
  • Sony specialist
Re: PS3 pin outs mobo's/power supplies all types
« Reply #7 on: November 30, 2011, 02:33:48 PM »
Let me recheck those #s as i did not have my digital tester when I made this thread.

Offline crashmasher

  • Registered BST
  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 64
  • Post quality +4/-0
  • Gender: Male
  • Acidmods User
Re: PS3 pin outs mobo's/power supplies all types
« Reply #8 on: December 07, 2011, 09:08:12 PM »
There are also two pins located on the bottom of the psu from the motherboard, any info on these and how to use them with am atx psu?

Offline 1TONpete

  • Millennium Poster
  • *
  • Posts: 1224
  • Post quality +47/-2
  • Sony specialist
Re: PS3 pin outs mobo's/power supplies all types
« Reply #9 on: December 08, 2011, 06:41:37 AM »
Those are the 12 v points for mobo

Offline thearkman2009

  • Registered BST
  • E = MC²
  • *
  • Posts: 332
  • Post quality +2/-0
  • Gender: Male
  • Designing Innovative Mods
    • SteelROMs
Re: PS3 pin outs mobo's/power supplies all types
« Reply #10 on: January 02, 2012, 12:18:07 PM »
Any pinout points for CECHE01 for 12v, 5v, and 3v?  Testing for new pinouts isnt my forte.  lol

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal