Author Topic: KillDogz psp *****Updated 6*****  (Read 15401 times)

Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
KillDogz psp *****Updated 6*****
« on: March 18, 2009, 02:29:09 PM »
hay guys im a bit bored of waiting for all my stuff for my mods to come so im gonna write up a plan to tell you what im gonna do then when its done ill post a new topic and get ur reviews on how the psp comes out so heres what i wanna do.

Now im gonna be modding a psp slim and i was thinking of doing these mods and remember this is my second psp im gonna be modding and you may think im jumping in at the deep end but owell lol

so i was thinking about doing a red and black theme for the psp

Smokey black shell red cherry buttons and red trim for show then i im gonna put in a sick mods fader and make the ring of light fade in and out of red im also going to be making the D pad and X O  /_\ sq have sound reactive in them and also in the middle of them aswell  now im not sure what im gonna do with the triggers yett could be any one of them fader or sound reactive not sure yett but anyways ill carry on then i was thinking of putting a Cr-3100 in the umd drive space and mayby try and fit a 50mm speaker in there i should have enuf space since the speaker is only 9.5mm deep and the cr-3100 is only small anywayz and on the speaker put sound reactive in the middle and if i do think im up to it i mite put a go cam in the back and front but thats not decided yett so i dunno and if i can get anymore red leds im gonna go around the outlining of the shell with red leds and make the back leds sound reactive and the front fader so please let me know what you guys think and if you want give me some more ideas cuz i dont care about jumping in at the deep end cuz i enjoy modding.

but please dont give me ideas for a dual nub cuz i dont like them that much adn dont see the point lol



xXxKilldogxXx

26/03/09 speaker done.
Front

Back

Heres the diagrame of the circuit made by Blazinkaos.

28/03/09
Sickmods fader installed

Better Pic

2n2222 transistor Installed


UPDATE 4 16/04/09
Got the Red Buttons, Smokey Black Case, Speaker Installed also i put on the red trim.
Speaker Installed:

Faceplate:

Trim:

Soon I will be getting the led strips and also ill be workin on the triggers ,vu meter and the buttons
THE PROJECT IS BACK ON AFTER MONTHS OF LEAVIN IT IM BACK FOR THE MODDING AND IM GONNA GIVE THIS BABY SOME EXTRA FEATURES AS WELL AS THE SCREEN SHE NEEDS HEHE
the dual nubs cbf tbh never been a big fan but the rest of the plan will be going ahead just will take times as i need to get more supplies atm as ive lost quite a few but still got some parts.

UPDATE 6
Attached Speaker all wired up and also fitted Vu meter chip inplace connected to 5v + and Resitor on 5/7 pin just need more parts and ill carry on Will post pics 2moz
« Last Edit: January 11, 2010, 04:39:25 PM by killdog »

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: My plans for my next mod
« Reply #1 on: March 18, 2009, 05:16:50 PM »
...um dual nubs are for fps games and make them a hell of a lot more fun/easier to play.

as for jumping in at the deep end.. this is ur 2nd psp and u intend to do all this??? no offense but i doubt u will be able to deal with all the wiring and stuff. Also, even if u could do it i wouldnt recommend it because subtle lighting is nice but 50 leds crammed everywhere is a little overboard.

also, arent u a modder for hire? how could u be a modder for hire when uve only ever modded 1 psp? Finally, good luck if u really wanna go through with this :tup:

Sig by Kenshinffx - Thanks!

Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
Re: My plans for my next mod
« Reply #2 on: March 18, 2009, 06:13:08 PM »
thanks and yh i am a MFH and ive only done one psp but i put alot of work into that psp and now i wanna do another psp and make it ten times better and in order to get this slim done im gonna need to plan it properly and think what im gonna do first and what needs to be done last or else this will not work.

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: My plans for my next mod
« Reply #3 on: March 18, 2009, 06:15:28 PM »
You might like to know the UMD Area is about 5mm, SO that speaker wont really work out if you have the right measurement. :D

Offline DarkShot

  • I approve your mom
  • Acid Modder
  • *
  • Posts: 781
  • Post quality +0/-0
  • Gender: Male
  • ÜBERRAPESKILLETS
Re: My plans for my next mod
« Reply #4 on: March 18, 2009, 06:20:49 PM »
What you got planned is a little overboard, so you might want to tone it down as bustin said.

And unless you don't want the speaker to be flush, your better off getting a thinner one.

Why not get a jewel to show off the CR-3100?

And by the way, could you use punctuation?

It'd make it alot easier for everyone to read.

Offline eyelykeknives

  • Motor Mouth
  • *
  • Posts: 91
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: My plans for my next mod
« Reply #5 on: March 18, 2009, 06:25:16 PM »
kill dog where do you get your 50mm speaker from ? i cant find a good one ><

Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
Re: My plans for my next mod
« Reply #6 on: March 18, 2009, 06:46:17 PM »
thanks jumbo i think i did get my mesurements wrong and about the writing soz but no affence i dont care lol :tup: and the place where im getting my speaker from is maplins.co.uk heres the link http://www.maplin.co.uk/Module.aspx?ModuleNo=32371

and i may be going over board but i like to challenge my self so ill just have to see how it goes lol if it goes wrong owell unlucky for me if it goes well yay i suppose lol

Offline eyelykeknives

  • Motor Mouth
  • *
  • Posts: 91
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: My plans for my next mod
« Reply #7 on: March 18, 2009, 06:47:28 PM »
thanks killdog :P have you tried using one before ? is it really loud ? and how big is the inside of the metal ring anyone know ? lol

Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
Re: My plans for my next mod
« Reply #8 on: March 18, 2009, 06:48:36 PM »
ow yh and btw i forogt to mention in the first post darkshot yh jewel sorry i really forgot i got the design already


and no i havnt tried it yett but looks good and its 50mm perfect to mount on a jewel

Offline eyelykeknives

  • Motor Mouth
  • *
  • Posts: 91
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: My plans for my next mod
« Reply #9 on: March 18, 2009, 06:51:00 PM »
oh so its bigger than the ring ?

Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
Re: My plans for my next mod
« Reply #10 on: March 18, 2009, 06:51:58 PM »
same size

Offline eyelykeknives

  • Motor Mouth
  • *
  • Posts: 91
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: My plans for my next mod
« Reply #11 on: March 18, 2009, 06:55:41 PM »
mm i see ..

Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
Re: My plans for my next mod
« Reply #12 on: March 18, 2009, 06:56:34 PM »
are u gonna try a speaker in the back ????

Offline eyelykeknives

  • Motor Mouth
  • *
  • Posts: 91
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: My plans for my next mod
« Reply #13 on: March 18, 2009, 06:57:59 PM »
well i want to put one in the center of the ring cuz i like the ring . but i dont know the size of it :p im waiting for someone to reply cuz theyre selling one

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: My plans for my next mod
« Reply #14 on: March 18, 2009, 09:19:34 PM »
ow yh and btw i forogt to mention in the first post darkshot yh jewel sorry i really forgot i got the design already


and no i havnt tried it yett but looks good and its 50mm perfect to mount on a jewel

uh how do u intend to mount a speaker on a jewel?


thanks jumbo i think i did get my mesurements wrong and about the writing soz but no affence i dont care lol :tup: and the place where im getting my speaker from is maplins.co.uk heres the link http://www.maplin.co.uk/Module.aspx?ModuleNo=32371

and i may be going over board but i like to challenge my self so ill just have to see how it goes lol if it goes wrong owell unlucky for me if it goes well yay i suppose lol

you better care about the wires... if u dont manage them properly you will have wires everywhere and u wont be able to figure out how to close the psp.


also, can i see a vid/thread about your first psp please?

Sig by Kenshinffx - Thanks!

Offline rgarjr

  • Ω Allumnist Ω
  • *
  • Posts: 131
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: My plans for my next mod
« Reply #15 on: March 18, 2009, 09:30:08 PM »
bustin is right,  I just hate having wires all over the place. 

Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
Re: My plans for my next mod
« Reply #16 on: March 19, 2009, 05:36:57 AM »
time for me to learn how to clean up my wiring i suppose lol and ill show u the vid

<a href="http://www.youtube.com/v/JzG-GjqeDRw&amp;hl=en&amp;fs=1" target="_blank" rel="noopener noreferrer" class="bbc_link bbc_flash_disabled new_win">http://www.youtube.com/v/JzG-GjqeDRw&amp;hl=en&amp;fs=1</a>
« Last Edit: March 19, 2009, 07:26:55 AM by Jumbo »

Offline ~:Dhruv:~

  • Millennium Poster
  • *
  • Posts: 1321
  • Post quality +0/-0
  • Gender: Male
  • [quote author=Reaper link=topic=30647.msg227184#ms
    • Infectech
Re: My plans for my next mod
« Reply #17 on: March 19, 2009, 05:47:31 AM »
click the reply button, not quick reply, there'll be a button there that says videos click it n paste the embed code in it. Its like how you put in a picture.
  you look like a carrot.
My nickname at school is carrot cake, because i can't get tan. I get orange. and my face is shaped like a carrot. And i make a mean carrot cake.

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: My plans for my next mod
« Reply #18 on: March 19, 2009, 07:05:49 AM »
your speaker might be a little too big to fit in the umd drive with a cr-3100. you need a speaker that is at the most 4mm thick. you only have 7.5mm - 8mm to work with in regards to umd drive space. there is a way to get more room. When i made the nightshade slim, i added a ring of light jewel and fitted a grill to the same level as the jewel. then, when the jewel is fitted, it stands out from the back of the door giving you some extra milimeters.

When i installed the speaker and cr-3100, it fitted perfectly. you can get the jewel from shatteredmods or here if you ask.

Should look like this,



Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
Re: My plans for my next mod
« Reply #19 on: March 19, 2009, 07:13:23 AM »
ill jsut find a smaller speaker lolz owells but im determined to fit alot into one psp sounds fun lol :drunk:

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: My plans for my next mod
« Reply #20 on: March 19, 2009, 07:16:22 AM »
If you pull it off as a second mod then i'd be impressed. good luck dude!

Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
Re: My plans for my next mod
« Reply #21 on: March 19, 2009, 07:19:16 AM »
thanks and btw i mite do dual nub aswell but it will be tricky but hay i dont care lol and how do i embed vids lol some one tell me

Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
Re: My plans for my next mod
« Reply #22 on: March 19, 2009, 07:31:42 AM »
thanks jumbo u the man!!!!

Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
Re: My plans for my next mod
« Reply #23 on: March 19, 2009, 08:10:48 AM »
**Update** i could do what this guys doing
<a href="http://www.youtube.com/v/A_0vCOEsG68&amp;hl=en&amp;fs=1" target="_blank" rel="noopener noreferrer" class="bbc_link bbc_flash_disabled new_win">http://www.youtube.com/v/A_0vCOEsG68&amp;hl=en&amp;fs=1</a>
« Last Edit: March 19, 2009, 11:24:13 AM by Jumbo »

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: My plans for my next mod
« Reply #24 on: March 19, 2009, 09:11:51 AM »
I honestly doubt you'll succeed with dual nubs on your second psp.. Very few moders can do it on the slim, because u have to solder to super tiny zif connector pins...

Sig by Kenshinffx - Thanks!

Offline ~:Dhruv:~

  • Millennium Poster
  • *
  • Posts: 1321
  • Post quality +0/-0
  • Gender: Male
  • [quote author=Reaper link=topic=30647.msg227184#ms
    • Infectech
Re: My plans for my next mod
« Reply #25 on: March 19, 2009, 09:22:00 AM »
killdog , dude i really think you're being too ambitious on ur psp. Take it a step at a time. Dual nub will be pushing it.....
  you look like a carrot.
My nickname at school is carrot cake, because i can't get tan. I get orange. and my face is shaped like a carrot. And i make a mean carrot cake.

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: My plans for my next mod
« Reply #26 on: March 19, 2009, 11:05:51 AM »
**Update** i could do what this guys doing
<a href="http://www.youtube.com/watch?v=A_0vCOEsG68&amp;feature=related" target="_blank" rel="noopener noreferrer" class="bbc_link bbc_flash_disabled new_win">http://www.youtube.com/watch?v=A_0vCOEsG68&amp;feature=related</a>

It's easier. i've got one of those cr-5400 and it works great. plus you would save space in the umd drive. However, the 16gb cards for that are more expensive than the normal SD cards used on the cr-3100
« Last Edit: March 19, 2009, 11:07:47 AM by ApheX »

Offline eyelykeknives

  • Motor Mouth
  • *
  • Posts: 91
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: My plans for my next mod
« Reply #27 on: March 19, 2009, 02:38:47 PM »




hey what speaker is that ? wheres it from :P looks nice

Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
Re: My plans for my next mod
« Reply #28 on: March 19, 2009, 04:35:51 PM »
yh please tell

Offline killdog

  • Who Farted ???
  • *
  • Posts: 203
  • Post quality +0/-0
  • Gender: Male
    • Techn3t
Re: My plans for my next mod
« Reply #29 on: March 25, 2009, 04:22:34 PM »
BUMP

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal