Author Topic: xbox 360 controller mod  (Read 4647 times)

Offline Kilokk

  • In your AM modding your forums
  • Acid Modder
  • *
  • Posts: 937
  • Post quality +9/-7
  • Gender: Male
  • In the shadows of darkness I stand in the light.
xbox 360 controller mod
« on: March 16, 2009, 02:59:18 PM »
i recently broke my right index finger and i was wondering if it was possible to move the triggers down to where you hold the controller at (kinda like the perfect fps controller's little sticks are.) so that they can be easily pressed by the ring and pinky finger.  i would also like to know a price for the mod... probably wont be able to afford it (cant work like this) but i would at least like to know if it is possible... preferably in actual button form btw (those fingers arent strong at all...) thanks guys ^_^

Offline ichagowill

  • Ω Allumnist Ω
  • *
  • Posts: 107
  • Post quality +0/-0
Re: xbox 360 controller mod
« Reply #1 on: March 16, 2009, 10:20:58 PM »
what you could do i solder a wire to the top pin and middle pin of the trigger points. and to a push button in the back or you could even use modded mike setup without the npn transistor for rapid fire

Offline SN!P3R

  • Millennium Poster
  • *
  • Posts: 1444
  • Post quality +0/-10
  • Gender: Male
Re: xbox 360 controller mod
« Reply #2 on: March 17, 2009, 07:57:38 PM »
i could possibly do it for 50, excluding controller. you want the whole actual triggers lower correct?
BEST 360 MODDING
HELP OUR ECONOMY!

360 MASHUP THREAD

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: xbox 360 controller mod
« Reply #3 on: March 19, 2009, 09:32:07 PM »
i could possibly do it for 50, excluding controller. you want the whole actual triggers lower correct?

dont do it, hes been known to scam.

Sig by Kenshinffx - Thanks!

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: xbox 360 controller mod
« Reply #4 on: April 07, 2009, 06:21:41 AM »
dont do it, hes been known to scam.

who??


it would be very easy to just add a tact switch to the bottom of the controller, or you can use a big push button. if you want to move the acctual trigger, this will require alot of work, due to the way it conects to the controler mobo.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal