Author Topic: Installing DualNub™ Lite'n Easy + Demo  (Read 52487 times)

Offline JoblessPunk

  • King of the Wii-tards
  • *
  • Posts: 146
  • Post quality +0/-0
Re: Installing DualNub™ Lite'n Easy
« Reply #30 on: February 03, 2009, 12:36:57 AM »
DANM its a tight ass fit.
I've been working on this for about a day so far and I just got all of it to fit inside the PSP slim. The case is bulging a little and I still have to do the wiring, but I'll fix those problems in a few days (damn work getting in the way of things...)

BUT IT CAN BE DONE!
A lot of trial and error to get things to fit, but its not impossible!

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: Installing DualNub™ Lite'n Easy
« Reply #31 on: February 03, 2009, 12:42:41 AM »
did you actually do it wondering

DANM its a tight ass fit.
I've been working on this for about a day so far and I just got all of it to fit inside the PSP slim. The case is bulging a little and I still have to do the wiring, but I'll fix those problems in a few days (damn work getting in the way of things...)

BUT IT CAN BE DONE!
A lot of trial and error to get things to fit, but its not impossible!

https://www.acidmods.com/forum/index.php?topic=27449.0


PINOY AKO

Offline JoblessPunk

  • King of the Wii-tards
  • *
  • Posts: 146
  • Post quality +0/-0
Re: Installing DualNub™ Lite'n Easy
« Reply #32 on: February 03, 2009, 12:59:45 AM »
did you actually do it wondering

https://www.acidmods.com/forum/index.php?topic=27449.0



Yeah, I'll take some pix right now,
its not DONE, so its still a work in progress,
no wires, no spring in the nub and still have to fix a little bulging.

1 sec, stay up 10 more min and I'll have pix of my work in progress.

_________________________________________________________________________________

Pix as promised:








« Last Edit: February 03, 2009, 01:48:37 AM by JoblessPunk »

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: Installing DualNub™ Lite'n Easy
« Reply #33 on: February 03, 2009, 02:11:06 AM »
Yeah, I'll take some pix right now,
its not DONE, so its still a work in progress,
no wires, no spring in the nub and still have to fix a little bulging.

1 sec, stay up 10 more min and I'll have pix of my work in progress.


kool watch out for the wiring it's a pain

sorta wondering if sample did it

PINOY AKO

Offline JoblessPunk

  • King of the Wii-tards
  • *
  • Posts: 146
  • Post quality +0/-0
Re: Installing DualNub™ Lite'n Easy
« Reply #34 on: February 03, 2009, 02:17:47 AM »
Yeah, I'm kinda hesitating a little with the wiring. I can do it, but its just a big problem if I mess up.

I was kinda wondering the same, and trust me the thought did cross my mind a few times.

You can get the width right but I still haven't seem to get the height right, yet. Somehow I need to pull about 2 cm off the top of the to make it fit right.

I think can get the 2 cm from taking more off the bottom of the AC plug and cutting the case a little more but then I would have a 2 cm gap on top.
idk yet, I'm going to think about it some more and maybe 123sample explain a little more clearly.

Offline 123sample

  • Registered BST
  • Who Farted ???
  • *
  • Posts: 231
  • Post quality +1/-0
Re: Installing DualNub™ Lite'n Easy
« Reply #35 on: February 03, 2009, 04:03:27 AM »
kool watch out for the wiring it's a pain

sorta wondering if sample did it

As you wish, I'll show demo =)

Offline JoblessPunk

  • King of the Wii-tards
  • *
  • Posts: 146
  • Post quality +0/-0
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #36 on: February 03, 2009, 11:38:43 AM »
nice vid, but do you think you could take some more detailed pix of the nub?
I'm having troubles fitting it all, I got the width, but some how I need to cut about 2 cm off the top to make it all fit.

Offline l0rdnic0

  • 2%
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1836
  • Post quality +8/-0
  • Gender: Male
  • TeamCYBER

Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #37 on: February 05, 2009, 06:13:22 PM »
Nice tut good work.. you guys know that you can remove the power charger plug and wire up the USB port for usb charging even when your PSP is off.. you could even mod the charger so that it would have the USB end... This way you have more room in the PSP to work with..

But I like what you have done here real nice!!! :tup:


L0rdNiC0 Pioneering Mods on the PSP Slim :taunt:
Sound Mod, Button LED Mod, Security Mod, Dual NUB, Mode Select Switch + More

Offline Eddy04

  • Fart Sniffer
  • *
  • Posts: 42
  • Post quality +0/-0
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #38 on: February 16, 2009, 11:26:39 PM »
Is there any other place to get the Razor X instead of Coolmods?

Offline 123sample

  • Registered BST
  • Who Farted ???
  • *
  • Posts: 231
  • Post quality +1/-0
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #39 on: February 17, 2009, 04:38:43 AM »
Is there any other place to get the Razor X instead of Coolmods?
:sadno: :sadno: :sadno:

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #40 on: February 17, 2009, 02:43:12 PM »
Unless you get one off a member here. Make a post in the auctions section, and somebody may be willing to let go of one. Remember to accept rules though.

Sig by Kenshinffx - Thanks!

Offline 123sample

  • Registered BST
  • Who Farted ???
  • *
  • Posts: 231
  • Post quality +1/-0
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #41 on: February 17, 2009, 05:31:38 PM »
Unless you get one off a member here. Make a post in the auctions section, and somebody may be willing to let go of one. Remember to accept rules though.
:yess: :yess: :yess:

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #42 on: February 17, 2009, 11:07:20 PM »
you can also make your own. 

Offline 123sample

  • Registered BST
  • Who Farted ???
  • *
  • Posts: 231
  • Post quality +1/-0
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #43 on: February 18, 2009, 04:26:38 AM »

Offline joshe22587

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #44 on: March 04, 2009, 04:51:48 PM »
ive got all the parts to do tried uploading tut keep getting error on my computer where do i wire the second nub on motherboard looked under wifi didnt see anything that looked like what is shown in pic can you up load a whole view of motherboard and show exactly where the pins are?? Plz thank you cant wait half way there

Offline Eddy04

  • Fart Sniffer
  • *
  • Posts: 42
  • Post quality +0/-0
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #45 on: April 11, 2009, 06:59:58 AM »
Hi guys, Is me again. I got the PSP slim and trying to add the second analog. I invested about 5 hours of my life trying to put together the analog with the little loving spring. >=(
Well now the problem is I found the tutorial for the slim, just that how am I gonna solder the cables to the small points in the power board. T_T
Is there any way to install the second analog without removing the AC power jack?

If you have any tips for soldering the razor x please let me know. I would really appreciate.

Offline kemolagger

  • Chief squatting Hard
  • *
  • Posts: 25
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #46 on: April 11, 2009, 09:06:33 AM »
I'm sure that all you have to do for the power jack is just to file it down a little bit as long as you are using the razor X kit.  If you're using the razor 1 or 2, then you'll have to relocate the power jack and power board.  Be EXTREMELY careful when you try to solder the wires to the motherboard, if you mess up that ZIF connector, your out 80$ to replace it!(entire mobo)
« Last Edit: April 11, 2009, 09:08:57 AM by kemolagger »

Offline marek_g44

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Acidmods User
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #47 on: April 20, 2009, 11:07:33 AM »
Hello.
I have ice silver psp slim.
Can I use slim grey analog ? - like this http://www.dealextreme.com/details.dx/sku.10794
Can I do it without remove power board or yellow power socket ?
I can crop yellow power socket, analog or something.

Thanks for a reply.
Sorry for my bad English,
« Last Edit: April 21, 2009, 11:38:00 PM by marek_g44 »

Offline 123sample

  • Registered BST
  • Who Farted ???
  • *
  • Posts: 231
  • Post quality +1/-0
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #48 on: April 20, 2009, 11:34:49 AM »
Hi

I haven't try slim analog yet, here in this tutorial, I'm using 1000 Family analog

Oh yes you can do it, but it takes time to exactly fit in,
but others said it will be easier if you remove yellow power socket, and do USB Charge mod,
so you will have a lot more space to work,

It's actually depends on you, how would you make it, it's all on your own, as long as you know the basic theory above

Looking forward to see it, Sugoi!!!  :yess:

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #49 on: April 20, 2009, 12:48:13 PM »
im still doing this and i want to try getting the power plug to stay there.
also i got question if anyone can answer my nub woobles a lil does that mean i need to put more solder on the razor so it balances the the middle part out?

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline Ardi_beltz

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #50 on: May 13, 2009, 09:01:33 PM »
I shoul do this to my PSP slim, but there is just on thing i want to do, while playing monster hunter Portable you use the D-Pad to look around, an the i came up with this electric scheme:

(i know it's crappy but i'll update it making it better)



i don't know the wiring of the PSP so i also need to know where to put the wires.

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #51 on: May 13, 2009, 09:40:00 PM »
Yea kinda lost me there bud try redoing that. Ah thats a nice game havent played that in awhile.

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline Ardi_beltz

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #52 on: May 14, 2009, 07:56:06 AM »
Ok here's the re edition



i hope that this one is cleverer.

the biggest problem with this is that i need to find a switch small enough to fit insidethe case

Offline lucasapoll

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #53 on: October 15, 2009, 01:09:28 PM »
This works in the psp 3000?

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #54 on: October 15, 2009, 08:45:39 PM »
Much better ardi

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline z_byrd

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
  • Acidmods User
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #55 on: December 04, 2009, 08:06:56 PM »
so the second analog stick does it work as the /\ [] X O buttons ?? or is it separate completely i'm a bit confused on its uses but interested plz give me some details

Offline DragonZero

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #56 on: December 09, 2009, 08:29:30 AM »
cool ! btw do u know how to make a other color of your power on button?

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #57 on: December 09, 2009, 03:30:53 PM »
Uhh say that again it didnt come out as clear.

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline T4b

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Gender: Male
    • PSP Wiki
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #58 on: January 12, 2010, 06:59:58 AM »
Ok here's the re edition



i hope that this one is cleverer.

the biggest problem with this is that i need to find a switch small enough to fit insidethe case
Have you found a switch yet? I would liek to do that, to.

Offline yurchik

  • Guppy
  • *
  • Posts: 7
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Installing DualNub™ Lite'n Easy + Demo
« Reply #59 on: January 23, 2010, 03:26:19 AM »
where i can buy razor x in usa?

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal