Quick Forum Nav



Xbox 360 PS3 Wii PSP DS PC

Pages: [1]   Go Down
Print

Author Topic:  Wiimote and Nunchuck Mod Tutorial by Tmandt  (Read 10876 times)

pinoyballa

  • Trade Count: (0)
  • Millennium Poster
  • *
  • Offline Offline
  • Posts: 1246
Wiimote and Nunchuck Mod Tutorial by Tmandt
« on: January 14, 2008, 12:14:52 PM »
WIIMOTE AND NUNCHUCK MOD TUTORIAL BY TMANDT



Introduction
Ok I decided to make a tutorial on how to mod your wiimote and nunchuck so they can light up. :buttrock: Sorry if you think this tutorial is long. Tell me what you think of my tutorial ;D Ok lets get started. Sorry for the big pics ;)


Parts Needed
  • Wiimote
  • Nunchuck
  • Solder
  • 3mm Blue Led


Tools Needed
  • Soldering Iron
  • Tri-Wing Screwdriver
  • Phillips Screwdriver Set
  • Cup Cake Mat :buttrock: rofl

 
Step By Step Tutorial
1- First you get your wiimote, nunchuck, soldering iron, solder, etc...
                 
                 
                 
2- Now you take your tri-wing screwdriver and you take your nunchuck apart like so.
                 
                 
3- You take your 3mm led and you solder to these points on the nunchuck board like so.
                 
4- Now your nunchuck should look like this.
                 
5- You plug your nunchuck to your wiimote and see if it works, if so put everything back together like this.
                 
                 
                 
                 
And there you go your modded nunchuck now on to the wiimote
6- You get your wiimote and take it apart like so
                 
                 
Be careful on this part take your phillips flathead and pry your wiimote cover off but dont break it
                 
                 
7- Now you take the board out of th casing and flip it over
                 
8- You solder your 3mm led to these points
                 
9- Now bend your led over to the other side and position it like so
                 
10- Pop your batteries back in and see if it works. im my case it does
                 
                 
                 
11- If it works put your wiimote back together
                 
                 
                 

CONGRATS! :buttrock: YOU JUST FINISHED YOUR WIIMOTE AND NUNCHUCK MOD! HERE IS THE FINAL PRODUCT!
                 
                 
                 

Plz Leave +Karma Or Gold If You Used My Tutorial Thank You! ;D
« Last Edit: June 16, 2008, 09:18:21 PM by dslitemodder »
Logged

AzNsquirl

  • Trade Count: (0)
  • Guppy
  • *
  • Offline Offline
  • Posts: 1
Re: Wiimote and Nunchuck Mod Tutorial by Tmandit
« Reply #1 on: June 12, 2008, 09:23:58 PM »
hey dude would you do the same thing for the B butten on the wiimote? like just add another 3mm led so but position it diffirently and so in total there is 4 wires on the  negative and positive? I saw another tut where he soldered the B buttens and A buttens to different areas.
Logged

Jumbo

  • Dr. Mod
  • BST BAN
  • Trade Count: (0)
  • *
  • Offline Offline
  • Posts: 2430
Re: Wiimote and Nunchuck Mod Tutorial by Tmandit
« Reply #2 on: June 15, 2008, 06:47:15 PM »
Just to tell you guys it is Tmandt not   Tmandit LOL
Logged

Tri-edge

  • I found Nemo!!
  • Global Moderator
  • Trade Count: (+2)
  • *
  • Offline Offline
  • Gender: Male
  • Posts: 2394
  • Azure knight
Re: Wiimote and Nunchuck Mod Tutorial by Tmandit
« Reply #3 on: June 16, 2008, 09:17:59 PM »
Quote from: gotjumbo911 on June 15, 2008, 06:47:15 PM
Just to tell you guys it is Tmandt not   Tmandit LOL
oops, thanks for the heads up
Logged

Thanks VoX for the sig and avatar
Quote from: Mr. Fail on December 20, 2009, 05:28:53 PM
Robin I r sorrieez.  :cry2:

draculamunky

  • Trade Count: (0)
  • Guppy
  • *
  • Offline Offline
  • Posts: 2
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #4 on: June 19, 2008, 10:25:18 PM »
Hey, I have a question.

I was messing around with an LED ring light, i took it apart and thought that maybe you can connect the chip with the LED and switch to the inside of the wiimote. Then maybe cut a whole on like the side of the wiimote so that the switch cant stick out. Thus enabling the LED to turn on/off. Would it work?

Heres the LED ring light I'm talking about.



When I get my hands on a soldering gun, I'm going to attempt it.

Logged

tmandt

  • Club AM VIP
  • Trade Count: (0)
  • *
  • Offline Offline
  • Gender: Male
  • Posts: 1552
  • o.O tOny! JDMKID
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #5 on: June 22, 2008, 08:50:29 PM »
yes you can use that ring light thing. lol i had no idea my tut was posted up here lol.
Logged

draculamunky

  • Trade Count: (0)
  • Guppy
  • *
  • Offline Offline
  • Posts: 2
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #6 on: June 23, 2008, 03:39:57 AM »
Sweet, I'm going to do it as soon as i get a soldering gun. =D
Logged

Slim Hacker

  • Mr PS3
  • Local Moderator
  • Trade Count: (0)
  • *
  • Offline Offline
  • Gender: Male
  • Posts: 1150
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #7 on: September 21, 2008, 08:20:02 AM »
hey my friend is thinking about doing this he wants a rating on how tough like 1-10 he is VERY VERY bad at soldering soo about how hard
Logged

Quote from: Jumbo
I herd you like stealing quotes ey?

DaNN0fTHURSDAY

  • Trade Count: (0)
  • Chief squatting Hard
  • *
  • Offline Offline
  • Posts: 15
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #8 on: October 19, 2008, 10:36:42 AM »
Yesh i agree with him ^.^ how hard is this to do?
Logged
Voiding warranties is fun, Don't you think so?

Jumbo

  • Dr. Mod
  • BST BAN
  • Trade Count: (0)
  • *
  • Offline Offline
  • Posts: 2430
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #9 on: October 19, 2008, 11:47:32 AM »
Its easy if you can solder
Logged

Alien_X

  • Club AM VIP
  • Trade Count: (0)
  • *
  • Offline Offline
  • Gender: Male
  • Posts: 1013
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #10 on: October 28, 2008, 10:54:50 AM »
Quote from: Jumbo on October 19, 2008, 11:47:32 AM
Its easy if you can solder

Which tmandt can't from the looks of the pictures.
Logged

Sigs by Alien_X
www.ax-elec.com

wtfisausername

  • Trade Count: (0)
  • Ω Allumnist Ω
  • *
  • Offline Offline
  • Posts: 140
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #11 on: January 08, 2009, 06:02:38 PM »
My Wiimote is different...tats too bad. but yea that isnt a very good soldering
Logged
on my dd-wrt wireless bridge. :) Internet isn't really good in my area.

PsychoticWolf

  • I am Not Muslim.
  • Trade Count: (0)
  • E = MC˛ Mad Scientist
  • *
  • Offline Offline
  • Gender: Male
  • Posts: 1610
  • Team CYBER
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #12 on: January 08, 2009, 08:19:39 PM »
Quote from: wtfisausername on January 08, 2009, 06:02:38 PM
My Wiimote is different...thats too bad. but yea that isnt a very good soldering
It works Don't it.. and this tut just makes me want Cupcakes..
Logged
I r Teh InFector of your machine..

0xA73C16CCD0B9C4F20BC7842EDD90FC20

All your Data are belong to us

wtfisausername

  • Trade Count: (0)
  • Ω Allumnist Ω
  • *
  • Offline Offline
  • Posts: 140
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #13 on: January 08, 2009, 11:43:27 PM »
Yes, it probably does work, ive seen these tutorials all over the net, they just don't work on the newer Wiimotes because it doesn't have the two power point.
http://img71.imageshack.us/img71/5213/cimg0035hn7.jpg
If someone seen a tut on these new wiimote, please post a Pict of it or something, ive been Google and havent find anything yet.

Edit:
vvv I would use a multimeter, but i dont have one that is working right now. I got mine from RadioShack for 20$ and a 12V battery, idk what is dead battery or multimeter. lol.
« Last Edit: January 12, 2009, 09:25:30 PM by wtfisausername »
Logged
on my dd-wrt wireless bridge. :) Internet isn't really good in my area.

bustinthejustin

  • Registered BST
  • Trade Count: (0)
  • *
  • Offline Offline
  • Gender: Male
  • Posts: 2378
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #14 on: January 09, 2009, 03:53:41 PM »
Just turn on your multimeter, ground one point, turn on the wiimote, and poke around with the positive end till you find some good useful points... Then turn it off and do the same. If points that used to be positive aren't anymore, YOU HAVE A WINNER!
Logged

Sig by Kenshinffx - Thanks!

GralGrievous

  • Trade Count: (0)
  • Guppy
  • *
  • Offline Offline
  • Gender: Male
  • Posts: 3
  • Acidmods User
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #15 on: May 31, 2009, 08:50:49 PM »
I know no one cares any more but I'm new to modding and I used SMD LEDs for the Z and C Buttons and it works great. Here are some pics.





It's way easier than using 3mm LEDs and I got better results.
Logged

COD3-BRKR

  • Acid Modder
  • Trade Count: (0)
  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Offline Offline
  • Gender: Male
  • Posts: 59
  • Hack n Mod
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #16 on: March 13, 2010, 06:40:50 PM »
Im thinking of doing a sound reactive led mod on the wiimote :yess:
Logged

wtfisausername

  • Trade Count: (0)
  • Ω Allumnist Ω
  • *
  • Offline Offline
  • Posts: 140
Re: Wiimote and Nunchuck Mod Tutorial by Tmandt
« Reply #17 on: March 15, 2010, 02:08:46 AM »
S Reactivr in wiimote has been done before. the led was placed in the speaker hole part. looks quite nice
Logged
on my dd-wrt wireless bridge. :) Internet isn't really good in my area.
Pages: [1]   Go Up
Print
 
 

ad-dropbox.jpg

Page created in 0.1 seconds with 39 queries.