Author Topic: WiiMote LED Swaps  (Read 7751 times)

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
WiiMote LED Swaps
« on: January 24, 2009, 11:20:15 AM »
WiiMote LED Swaps

Introduction
Anyone get bored of the normal blue leds? Dont like them blue?
Well lets change em! My favorite color is red so i chose to use red leds.
Enjoy, LONG LIVE AM!
-Chris a.K.a Jumbo

Note:
Also just under 3 volts come off the leds, so low voltage leds look better :D
Parts Needed
--WiiMote
--4x SMD 0603 LED


Tools Needed
-- 15-30 watt Soldering Iron
-- Solder
-- Triwing Screwdriver
-- Flux


Picture of things needed


Average Time To Complete- About 10 Minutes

Difficulty Rating-1/5

Step By Step Tutorial-
First, We need to use a Triwing Screwdriver to open the WiiMote up.


Now that the screws are out put them somewhere safe.


The top of the wiimote is always a pain to open a flathead screwdriver and some patience should get you though this.
(Dont try too hard or you can dent the caseing)


After you hear the pop pull the top off and remove it so it looks like this-


Now tin your leds and remove the leds from the wiimote and solder them like this-

Negative goes to the top, postive on the bottom.

Should like this when your done-


Test it out quick and if they light its time to close up!

Now put the top of the wiimote down and press the bottom onto it untill you hear the 2 latches pop in.


Then screw the screws back in-


Enjoy your new LED's!




« Last Edit: June 26, 2010, 07:56:57 PM by laxboy »

Offline cfsnipa

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: WiiMote LED Swaps
« Reply #1 on: August 19, 2010, 02:24:54 PM »
i have some leds from brianspdr.com and i am if these are the right leds or not im trying to convince my mom to let me do this

heres a link to the page

http://www.brianspdr.com/Xbox360rapidfire27.html

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal