Topic: AcidMods Wii Rapid Fire Kit /Wii RapidFire Pro Video Added (Read 24956 times)

SYSTEM · « **on:** November 01, 2008, 09:08:01 PM »

Once again AcidMods is first to bring you some serious video game pwnage.. Now we have the Wii rapid fire kits. Ever wonder what an automatic shot gun is like? Well now you can see in house of the dead with the new rapidfire kits..With this kit you can have rapid fire on virtualy every wii game. Wii rapid fire will make gaming on the wii insane just check out this footage…

Wii Rapid Fire Pro NEW

In the next series of pictures you will see how simple the install is we will put up a more detailed tutorial up later.. but trust me this is a simple install out of all our kits this is the far simplest..

Thanks to Nintendo's simple PCB design which lables everything it was not hard to fing the power and ground locations...

Woot that chip looks mighty snug in there thanks Nintendo.. Also we have a convenient spot to place out activation button next to the sync button..

Looks so pretty she is ready to be turned on!!!!

We love having a activation led to let us know what mode we are in....

Get your Wii Rapid Fire Kit in the AcidMods Shop Here

KingMike_OS · « **Reply #1 on:** November 02, 2008, 05:50:31 PM »

Wii Wire Diagram.

Remove the 4 TRI-Wing Screws.

Wii Mote Internal Pic.

Chip and Switch locations marked with sharpie.

Drilling hole for switch.

Switch hole beside hole for sync button.

Switch and Chip in correct location.

+V and GND locations.

B location on pcb is Lable you can hook it up to the pads it self if its hard to solder to the B point

Yellow wire solidered to B location on pcb.

Yellow wire secured safely.

mersi · « **Reply #2 on:** November 02, 2008, 07:20:44 PM »

This is so da.n sweet...
I must have that on my wiimote!

And because of living in germany and not being able to order from your shop i would really appreciate a nice tutorial! :-)

SYSTEM · « **Reply #3 on:** November 02, 2008, 08:05:51 PM »

Quote from: mersi on November 02, 2008, 07:20:44 PM

This is so da.n sweet...
I must have that on my wiimote!

And because of living in germany and not being able to order from your shop i would really appreciate a nice tutorial! :-)

we will post a tutorial soon and our shop ships world wide

Bor311 · « **Reply #4 on:** November 03, 2008, 04:25:36 PM »

Could you please post the source that you programmed into the pic. That woud be awsome sauce.

tapdisbong · « **Reply #5 on:** November 03, 2008, 05:31:50 PM »

can you post a picture of the soldered chip

gameroms · « **Reply #6 on:** November 03, 2008, 08:52:58 PM »

no sir its not, but will be in the kit.

ISOHaven · « **Reply #7 on:** November 03, 2008, 10:54:00 PM »

Can you post an install diagram for those that don't want the LED? I'd rather keep the installation even simpler and just guess which mode it's in. I'm not a fan of flash. I assume just leave pin 2 alone and still give pin 1 power?

Also, I have a couple extra remotes (7 total and only need 4). I would love to play around with an always on unit. What would happen if I shorted 4 and 8 to ground, gave 1 power and wired 7 to my button of choice?

One last question, what all comes in the kit? The chip AND the switch (wire? I'm all out)? The product page says chip only. It seems that was to get accross to people NO WIIMOTE but I wasn't sure if the switch was incuded. My radio shack doesn't sell that switch and getting them to order force feed is a PITA.

With all that said and asked...AWESOME JOB! You guys rock! I figured we would never see a Turbo remote since Nintendo will not license these things to anyone else. THANKS!

SYSTEM · « **Reply #8 on:** November 04, 2008, 06:28:10 AM »

Quote from: ISOHaven on November 03, 2008, 10:54:00 PM

Can you post an install diagram for those that don't want the LED? I'd rather keep the installation even simpler and just guess which mode it's in. I'm not a fan of flash. I assume just leave pin 2 alone and still give pin 1 power?

Also, I have a couple extra remotes (7 total and only need 4). I would love to play around with an always on unit. What would happen if I shorted 4 and 8 to ground, gave 1 power and wired 7 to my button of choice?

One last question, what all comes in the kit? The chip AND the switch (wire? I'm all out)? The product page says chip only. It seems that was to get accross to people NO WIIMOTE but I wasn't sure if the switch was incuded. My radio shack doesn't sell that switch and getting them to order force feed is a PITA.

With all that said and asked...AWESOME JOB! You guys rock! I figured we would never see a Turbo remote since Nintendo will not license these things to anyone else. THANKS!

Everything you need comes with the kit LED, Chip, Button and wire...

taylorclark · « **Reply #9 on:** November 04, 2008, 08:27:28 AM »

you guys made it onto hack-a-day!

Alien_X · « **Reply #10 on:** November 04, 2008, 12:17:26 PM »

Quote from: Bor311 on November 03, 2008, 04:25:36 PM

Could you please post the source that you programmed into the pic. That woud be awsome sauce.

They won't give you the source.
I recommend you purchase the kit from the acidmods store.
But if you want some code I wrote then message me, it works, and is simple.
Alien.

ISOHaven · « **Reply #11 on:** November 04, 2008, 10:46:48 PM »

Quote from: SYSTEM on November 04, 2008, 06:28:10 AM

Everything you need comes with the kit LED, Chip, Button and wire...

Awesome! Thanks for the info. Can someone also get to at least this:

Can you post an install diagram for those that don't want the LED? I'd rather keep the installation even simpler and just guess which mode it's in. I'm not a fan of flash. I assume just leave pin 2 alone and still give pin 1 power?

KingMike_OS · « **Reply #12 on:** November 05, 2008, 01:25:16 AM »

yeah you can keep it simple .. we even made the basic simpler .. remove 10K not needed any more ..

IF you don't Want the LED than Just Leave Out Pin 5 .. thats it .. only 4 pin to wire up .. there only 2 mod any way

is not hard to tell which is Which

ISOHaven · « **Reply #13 on:** November 05, 2008, 11:58:52 AM »

Thank you very much for that! My orders will be in soon.

I hate to be a bother, but now I have one more clarification:

Quote from: KingMike_OS on November 05, 2008, 01:25:16 AM

only 4 pin to wire up

Your first diagram showed a switched ground going to pin 4 but in the new diagram it was moved to pin 2 and nothing on 4?

802Chives · « **Reply #14 on:** November 05, 2008, 12:12:46 PM »

Quote from: ISOHaven on November 05, 2008, 11:58:52 AM

Thank you very much for that! My orders will be in soon.

I hate to be a bother, but now I have one more clarification:

Your first diagram showed a switched ground going to pin 4 but in the new diagram it was moved to pin 2 and nothing on 4?

Don't worry about pins moving around, these are microcontrollers that can be configured anyway the programmer desires. Some pins have additional functions, so not every pin can do the same job, but for the most part all the pins can be used as inputs and outputs.

I think you may be looking at this like a chip with a special funtion like a 555, it is not. It is more similar a computer in that it can be set up in many different configurations, with endless amounts of functions through custom firmware programs that are loaded to the chip.

Hope that clears it up for you, and don't worry about being a bother....there is no such thing as stupid questions, just stupid answers

ISOHaven · « **Reply #15 on:** November 05, 2008, 02:43:20 PM »

Quote from: 802Chives on November 05, 2008, 12:12:46 PM

Don't worry about pins moving around, these are microcontrollers.....

What I meant by my question is that you stated "only 4 pin to wire up" but your new diagram has no 4. I just wanted to make sure you meant pin 2.

Thanks again!

Alien_X · « **Reply #16 on:** November 05, 2008, 03:15:42 PM »

Quote from: ISOHaven on November 05, 2008, 02:43:20 PM

What I meant by my question is that you stated "only 4 pin to wire up" but your new diagram has no 4. I just wanted to make sure you meant pin 2.

Thanks again!

I think by "4 pin to wire up" Mike means that you only have four wires to solder for the entire install.
Hope this helps you.
Alien

ISOHaven · « **Reply #17 on:** November 05, 2008, 03:28:45 PM »

Quote from: Alien_X on November 05, 2008, 03:15:42 PM

I think by "4 pin to wire up" Mike means that you only have four wires to solder for the entire install.
Hope this helps you.
Alien

DOH! It bit me. That's what happens when you over think something.

Thanks!

KingMike_OS · « **Reply #18 on:** November 06, 2008, 01:39:55 AM »

Now the Pro kit is not for the beginner its hard and lot's of work and making the wires fit

treemty · « **Reply #19 on:** November 08, 2008, 11:12:43 AM »

I just knew this would come out, next up psp rapid fire XD

Alien_X · « **Reply #20 on:** November 08, 2008, 11:16:49 AM »

Quote from: treemty on November 08, 2008, 11:12:43 AM

I just knew this would come out, next up psp rapid fire XD

PSP Rapidfire isn't happening apparently.
I did it ages ago anyway.
It is just too simple, and useless.

ISOHaven · « **Reply #21 on:** November 30, 2008, 12:53:13 PM »

What's up with the shop? Your shop link above brings back "Product not found" and I don't see any products after that???

rietherll · « **Reply #22 on:** November 30, 2008, 01:43:53 PM »

Quote from: ISOHaven on November 05, 2008, 02:43:20 PM

What I meant by my question is that you stated "only 4 pin to wire up" but your new diagram has no 4. I just wanted to make sure you meant pin 2.

Thanks again!

Still waiting for the new style controller install pics and wiring diagrams

Mactastic Mendez · « **Reply #23 on:** November 30, 2008, 03:03:15 PM »

Quote from: ISOHaven on November 30, 2008, 12:53:13 PM

What's up with the shop? Your shop link above brings back "Product not found" and I don't see any products after that???

hey the shop is down as it got totally screwed when the servers whent down and crashed

ISOHaven · « **Reply #24 on:** November 30, 2008, 05:30:06 PM »

Quote from: Mactastic Mendez on November 30, 2008, 03:03:15 PM

hey the shop is down as it got totally screwed when the servers whent down and crashed

Awe man, that sucks. Ok, I'll wait for it come back online. Thanks for the update.

edit*
I got your email about the store being back up. Still waiting for the Wii product to show up.

Thanks guys!!!!

1Sniper- plz dont double post. just hit the edit button on the side of the post

802Chives · « **Reply #25 on:** December 08, 2008, 09:57:20 PM »

I finished those chips a long time ago, try messaging mike. It was up in the store before the server problems, we'll get it up asap.

KingMike_OS · « **Reply #26 on:** December 09, 2008, 08:52:23 PM »

yup been having server problem .. its added to the shop

ISOHaven · « **Reply #27 on:** December 10, 2008, 01:58:42 PM »

Quote from: KingMike_OS on December 09, 2008, 08:52:23 PM

yup been having server problem .. its added to the shop

Thanks for adding the basic kit back! Is there an ETA for the advanced kit? The dual button one?

kaosbmx · « **Reply #28 on:** December 12, 2008, 06:23:16 PM »

ok im lost... i just got my basic kit. does it come with LED's. their is a black and red wire wrapped together and on one end solderd to something very very small. (wat is that?) and also where do i put the switch that actually makes the rapid fire. it came with 2 switches. sorry im dumb. somone please help....

KingMike_OS · « **Reply #29 on:** December 17, 2008, 05:28:56 AM »

the black and and Red is the + and - for the 603 SMD led .. that thing at the end is the led pre solder for you

there is also another one that is not solder its a extra one .. in your kit

why they are 2 switches .. 2 color red /black pick one what ever you like there is no wrong answer

the pro kit i will added this week to the shop ...

Now there are 2 ver of the Wii Remote Board and some one email me the picture of the new
board i have mark the points since its Diff that the one i did the TUT on :

kaosbmx · « **Reply #30 on:** December 17, 2008, 03:24:28 PM »

greatly appreciated, thanks
it kinda threw me off

kaosbmx · « **Reply #31 on:** December 31, 2008, 05:30:03 PM »

does the rapid fire switch need to be grounded??

kaosbmx · « **Reply #32 on:** December 31, 2008, 05:32:13 PM »

nevermind im blind

moshn · « **Reply #33 on:** January 01, 2009, 02:57:40 PM »

Quote from: KingMike_OS on December 17, 2008, 05:28:56 AM

the pro kit i will added this week to the shop ...

i was looking at the shop and i can't find it ? is it just me ??

ISOHaven · « **Reply #34 on:** January 05, 2009, 07:31:51 PM »

Quote from: moshn on January 01, 2009, 02:57:40 PM

i was looking at the shop and i can't find it ? is it just me ??

You're not blind. The store is all screwed up and has been for a while now.

If you go to the store yourself you can only find the $19.99 Basic Kit in a catagory. The only way to get to the Basic Chip Only is to click on the link in the first post or search for Wii Rapid in the store.

To date there has never been a Pro Kit on the Store. Still waiting.

kajkaj · « **Reply #35 on:** January 08, 2009, 10:37:02 AM »

Hi, I'm having problems changing the postage for an order. When I go to checkout, I select "First Class Mail International Large Envelope" ($6.80)

But when I get to "Order Confirmation" it says "United States Postal Service (1 x 0.5lbs) (Global Express Guaranteed): $38.95"

Is this an error or is it the way it is supposed to be? That would double the price for my order... Btw, I live in Denmark.

KingMike_OS · « **Reply #36 on:** January 10, 2009, 08:23:56 PM »

Ok i go head and add Zone rate , flat rate of 5.00 and should be fine should work for you monday when you order again.

Mike

Unalike · « **Reply #37 on:** January 25, 2009, 08:30:18 AM »

Hello, I'm interested in purchasing a kit, but I was wondering if this mod would work for an online game such as Call of Duty: World at War, or future games such as The Conduit. Have you guys tested any online games, or would you guys be able to make a vid testing an online game? Thanks in advance.

ISOHaven · « **Reply #38 on:** January 26, 2009, 01:10:34 PM »

Any ETA on the pro version yet?

SkePtical · « **Reply #39 on:** January 28, 2009, 04:41:16 PM »

Sorry to be a bother but im confused aswell

Do you have to solder the chip and switch to the circuit board, not just the wires connecting the chip and switch? And if you didn't, how did you secure the chip and switch in place? Also, what did you secure the wires with, sticky tape/sellotape?

And would this soldering iron be good enough for the sodering?

http://www.rapidonline.com/productinfo.aspx?tier1URL=Tools-Fasteners-Production-Equipment&tier2URL=Soldering-Equipment&tier3URL=Soldering-Irons&tier4URL=20W-Soldering-iron-with-fitted-mains-plug&moduleno=73960&kw=soldering+iron

Lol, long adress, anyways thanks if you can reply.

ratman · « **Reply #40 on:** February 17, 2009, 12:46:06 AM »

Have any of you guys ordered the basic kit and received it already? I ordered mines about a week ago and its still pending.

ISOHaven · « **Reply #41 on:** February 17, 2009, 01:09:30 AM »

I've been waiting for ages for he advanced chip. I guess its never coming...

gamerdude767 · « **Reply #42 on:** February 17, 2009, 08:09:56 AM »

just get this...

http://acidmods.com/ShopUSA/product_info.php?cPath=26&products_id=61

ISOHaven · « **Reply #43 on:** February 17, 2009, 10:35:27 AM »

$110? No thanks. I already have 4 remotes.

ring69 · « **Reply #44 on:** March 09, 2009, 07:50:52 PM »

where can i buy the kit or when !

and the code XD for the pic LOL

802Chives · « **Reply #45 on:** March 11, 2009, 09:10:41 AM »

Man sorry guys for leaving you all hanging in here. I just want to explain that I have written code for Wii rapidfire, there is the Basic and the Pro, and I also have done a Sleeper style that doesnt use any added buttons.

I have spoken with Nico about adding these chips to the store and we are planning to add them once we get things up and running. Now I must comment on why Mike didnt really sell this as a kit: installing this Kit is incredibly difficult, there is very little space and when Mike did sell the kits there was something like a %50 percent failure rate due to the customer not being able to install properly.

At this point I am not planning to sell these as kits as I dont think Nico needs the customer support headache that goes along with it. If someone wanted to get a bulk quantity of preprogrammed chips I would be able to work on a one on one basis to get someone set up for resale(ebay, craigslist, ect).

I will talk to Nico and not selling kits could change when and if we get time to document the install better in order to flush out the installer errors. If you guys are interested in these as premods, kits, or bulk order let nico know either via PM or his new shop thread in the general discussion thread.

ISOHaven · « **Reply #46 on:** March 11, 2009, 09:31:47 AM »

1. Thank you for your reply!

2. Difficult? Hum, didn't seem that difficult. But then again I was planning on no lights. At that point it was just a few solder points, no?

Couldn't you clearly state the complexity and offer no support?

ring69 · « **Reply #47 on:** March 11, 2009, 06:20:13 PM »

so ... can you guy´s give the code of the rapidfire ^^ to try it out ?

LOL ... or i will need to buy it ?

ColdSoldier · « **Reply #48 on:** May 19, 2009, 01:39:55 PM »

im not sure what to make of this thread, its my first time seeing it and i read it all the way through...

it seems at one time the basic was for sale and the pro model was ready but not for sale because of complications with your servers and the acidmods store.

when it was for sale, it appears that the basic kit came with:
(1) 8 pin pre-programed pic,
(2) on/off switchs,
(2)leds - (1) pre-soldered & (1) replacement led
adequate amount of wire.

do i have all this straight so far?

and are the kits either basic or pro going to be for sale again any tim in the future?

i personnally would love to see what i believe to be the basic kit for sale with out any gurantee if need be, also while im making my wishlist could it be less than $50 w/free shipping?

if it was i'd buy it, no complaints.

zerocool.666 · « **Reply #49 on:** June 04, 2009, 05:51:29 PM »

hello,
I bought 5 12F683 but require programmer, can you tell me how to do since you are selling more.
thank you in advance

billy bob · « **Reply #50 on:** January 22, 2010, 08:37:04 AM »

hello.. any luck on this chip / code / kit ????

i would buy 1...

dedafmonteur · « **Reply #51 on:** January 22, 2010, 10:08:09 AM »

DO NOT BUMP UP OLD TOPICS!!!

ISOHaven · « **Reply #52 on:** January 22, 2010, 11:57:36 AM »

Why not? I started a new thread regarding this mod and no one ever responded. Billy has a vald question regarding this topic.

any luck on this chip / code / kit ????

Where is this mod? What happened to it? What happened to 802Chives? I'm suprised when I started a new topic, no one slammed me for NOT SEARCHING and posting here. It's common prtactice to post in LIKE THREADS.

ISOHaven · « **Reply #53 on:** January 22, 2010, 03:11:51 PM »

Um....ok.... It was a chip. Couldn't have cost that much. Anyway, as I mentioned in the other thread, good thing Datel made one. Not as customized but ah well. Whatcha gonna do?

Thanks for the reply.

jsjbingxi · « **Reply #54 on:** January 25, 2010, 05:41:38 AM »

that is really a nice tutoria for wii beginner, and that is very useful for me, thanks very much.

modded matt · « **Reply #55 on:** January 25, 2010, 04:51:28 PM »

why would you say such a thing

. its just a programmed chip, of course it was produced and sold by the old shop. I fixed all the broken immages at the begining of the tutorial, and I have found the hex file. it is up to king mike and chives what to do with it. I will ask them and report back.

mike interested in this?

SCOTT4WHEELIN · « **Reply #56 on:** January 30, 2010, 11:14:00 AM »

i got my rapidfire kit for wii and its working!!!!! sweet!!!!!!!!!!!!

yungtinez · « **Reply #57 on:** February 07, 2010, 06:32:07 PM »

first time here. i need help finding that rapaid fire kit for the wii mote. i even looked at the shop and couldnt find anything. anything helps. awwesome mod

Author Topic: AcidMods Wii Rapid Fire Kit /Wii RapidFire Pro Video Added (Read 24956 times)