Author Topic: Official "Show off your Rapid Fire/Modded Controller"  (Read 124754 times)

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #30 on: March 07, 2009, 01:47:31 PM »
Using hazers pic code with my fire rates. Mode 1: 8 shots a second, mode 2: 18 shots a second, mode 3: 28 shots a second.

vid sucky quality.
Modded controller
« Last Edit: July 03, 2010, 02:58:25 AM by GhoSt_Death »
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline Ghost In Black

  • Chaos Lover
  • *
  • Posts: 258
  • Post quality +0/-0
  • Gender: Male
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #31 on: March 07, 2009, 09:32:30 PM »
I have done many mods but this is the only picture I have on my computer right now.
Blue tiger w/blue ROL LEDs, red rumble xbox guide button, and 3 mode rapid-fire.
« Last Edit: March 08, 2009, 05:40:53 AM by Ghost In Black »

Offline mingmaster

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #32 on: March 08, 2009, 05:36:50 AM »
Well, I'd love to see the tut for kingmikes leds, but cant find it.
Heres my controller, Ive used an extra Yellow "Y" button for my rapidfire trigger.
I thought it would look kind of good to get "Red Tiger" effect from CoD4


« Last Edit: March 08, 2009, 06:33:48 AM by mingmaster »

Offline kink192

  • Acid Modder
  • *
  • Posts: 916
  • Post quality +1/-0
  • Gender: Male
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #33 on: March 09, 2009, 06:56:46 PM »
thats awesome dude! how long did it take to make the button?
It's been a long time

Offline mingmaster

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #34 on: March 17, 2009, 10:52:29 AM »
Sorry i been away from home for a short while working.
It takes about 20 mins to make the button.
You just need an old knackered controller.
pick the button you want to use.
Use a dremmel or similar to carve out the guide tube.
A little hot glue....Modders best friend :)
stick it together then solder your tactile switch to a little strip board and glue the lot to that so your tactile is inside the guide tube.

works a treat too  :w00t:

Offline harri95

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #35 on: April 04, 2009, 11:04:32 AM »
Just double rapid fire triggers. :tup: Two Resistors, wire, momentary switchs. soldered to middle pins and to ground i think?  :confused: cant remember. It  :censored: works a treat on COD 4, but WAW it's  :censored: s :censored:t! Oh well.


Offline Dylon889

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #36 on: April 07, 2009, 03:57:49 PM »


My first controller mod.
Switched out the LB RB, start, back, d-pad, analog sticks, battery pack, and bottom to black.
Installed COD5 Rapid Fire Dual 4-Mode Trigger Kit, used different buttons though.
Will soon be swapping the LED's to blue.

Offline iNicoTECH

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #37 on: April 10, 2009, 01:45:26 AM »
Heres a neat mod i did  :hifive:


The led for the triggers doesnt really show great in the picture but it does in the video so check the video out  :tup:





And thee video  :winker:
Xbox 360 controller mod - LED L/R Trigger / Rapid Fire

Offline mastapsp

  • Ω Allumnist Ω
  • *
  • Posts: 102
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #38 on: April 12, 2009, 01:42:08 AM »
Rapid Fire COD 4
FOR SALE
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MESELX:IT&item=270373037967

Vibration light, sorry for the blurry pic you can see it better in the video
Image and video hosting by TinyPic" border="0
Blue Ring
Image and video hosting by TinyPic" border="0





Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #39 on: April 12, 2009, 06:55:57 PM »
latest elite controller pic mod.
soldering on the rumble makes extra space



and vid:
xbox 360 3 mode rapid fire  elite with red leds
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline Ben.

  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 657
  • Post quality +2/-0
  • Gender: Male
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #40 on: April 29, 2009, 02:23:49 PM »
Heres My 2.. Not Very Impressive, But Hey..
First Controller
- 3-Mode Sleeper Rapid Fire
- Red ROL Swap

Second Controller
- 3-Mode Sleeper Rapid Fire
- Blue ROL Swap




I'm very proud of them..  :#1:

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #41 on: May 05, 2009, 05:29:47 AM »
good job ben, those leds are not the easiest to start off with.


Ghost, in your pic it appears you get power from the rumble pack on a matrix board? hows that working out for you? I would assume that would supply the full 3v, but only when the rumble is active? just curious, never really thought of it. but it does give ideas!! there must be a microsecond delay though.

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #42 on: May 06, 2009, 12:05:11 PM »
Ghost, in your pic it appears you get power from the rumble pack on a matrix board? hows that working out for you? I would assume that would supply the full 3v, but only when the rumble is active? just curious, never really thought of it. but it does give ideas!! there must be a microsecond delay though.

sorry for the late reply, no its not getting the power from the rumble, a wire is soldered to a +2 -> 3v outside the picture to the left. The wires soldered to the rumble is auctualy the rumble itself, by removing the socket and soldering it on I managed to create plenty of mounting space for the chip.
« Last Edit: May 06, 2009, 12:06:42 PM by GhoSt_Death »
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #43 on: May 24, 2009, 03:12:21 PM »
here is the new controller I did for my wife this past week.
mod list:
orange led swap
painted shell hot pink w/ black accents
4 mode rapid fire (burnme up)
shell pics:

LED pics:


Offline Ghost In Black

  • Chaos Lover
  • *
  • Posts: 258
  • Post quality +0/-0
  • Gender: Male
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #44 on: May 27, 2009, 09:56:11 PM »
Nice. I was wondering how the paint job is since I've been using Duplicolor and it's been perfect, but it only comes in a few colors. What brand did you use?

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #45 on: May 28, 2009, 04:59:13 AM »
I will check the brand when I get home.it was expensive paint for plastics. not exactly sure, she bought it. LOL

the bigest thing with paint as I am sure you know is prepwork. the controller needs to be smooth, but not slick. I use a scuff pad from any paint store, 3000 grit steel wool works nice also. this will take that slick feel and shine off the controller without any scratches, then clean it all with a degreaser (rubbing alcohol works too), careful not to touch the surface to be painted with your hands, because your skin has oils on it you cant see that can affect the paint.
ghost, I am sure u know all of the above info, it was ment for newer members LOL

those orange leds are cool, the pic dosnt do it any justice. I wish I would have ordered more of them.

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #46 on: May 28, 2009, 05:08:15 AM »
Nice controller, man :tup:

I think I'm gonna get some gloves, now that I think of it... I handled my ps1 case a lot, and now it orange peeled a lot.....

Sig by Kenshinffx - Thanks!

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #47 on: June 05, 2009, 08:12:36 PM »
here is the new one..1.5 hr job...replace to blue leds, 4 mode rapid fire with activation button in face...




Offline F4thAcE

  • Hillbilly Modder
  • Motor Mouth
  • *
  • Posts: 88
  • Post quality +0/-0
  • Gender: Male
  • i live in the country my neigbors are trees.
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #48 on: June 05, 2009, 08:52:17 PM »

^^^^ my smexy lights on my halo3 themed controller p1=red p2=orange p3=blue p4=bright limeish green



555 timer mod going to get a new pushbutton tommorow will post pics just got done with it i luv it the scratch marks are for different games cod4 is the one on the right cod waw is the one on the left took out right rumble for it i used my drill press alittle to close in so i had to take out the little thinge the rumble hooks to just heated and pulled hot glued the potentiometer in worked out pretty good...

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #49 on: June 06, 2009, 05:46:32 AM »
F4thAcE, good job dude. I knew you ha it in you..looks cool

Offline haloed

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Gender: Male
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #50 on: June 20, 2009, 10:47:25 AM »
Halo 3 SPARTAN controller- Adjustable 555 Rapid Fire On Momentary Switch

Front (with chatpad)

Back (labeled with chatpad)

Offline lakrulez14

  • Registered BST
  • Ω Allumnist Ω
  • *
  • Posts: 130
  • Post quality +0/-0
  • Gender: Male
  • AcidMods Rule
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #51 on: June 24, 2009, 05:02:36 PM »
mine isnt too spectacular but i like it

led dome mod: red
dual rapid fire: halo 3, cod 4
and it has a built in mic







Offline ichagowill

  • Ω Allumnist Ω
  • *
  • Posts: 107
  • Post quality +0/-0
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #52 on: July 02, 2009, 12:29:30 AM »
modded matt that hot pick controller looks sick

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #53 on: July 19, 2009, 06:21:39 PM »
I got the viking mod done today. overall this is a nice product, works as advertised. hope there is more to come from the programer. it is not an easy install. the controller is not much but it fires very fast at cod5!!




the tact switches dont fit where I have them, I had to shave them and shave the controller to get them to fit there. I also had to shave alot out of the back of the controller wher the chip is placed to get it to sit flat. it was alot of work, but is a cool mod.

Offline mikespartian114

  • Motor Mouth
  • *
  • Posts: 75
  • Post quality +0/-0
  • Acidmods User
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #54 on: July 31, 2009, 01:39:32 PM »
this is my first RF mod useing Hazer's GameplayRF hex code, and thanks to moddedmatt and Jumbo for help and links.

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: Official \\\"Show off your Rapid Fire/Modded Controller\\\"
« Reply #55 on: August 07, 2009, 11:06:41 AM »
heres 1 of my pads its a elite with a programmable speed rf, blue rol and dome and lit ABXY, the 3 extra buttons on the back are for rf, the rf kit itself is immence it works on button or trigger it also works as a 3 shot burst kit on right trigger or button but not left. and you can program any speed from1 sps to 50 in incremantas of 0.1 sps (go any fast then this and the pad dosnt register rf) awell as all the modes it has led indication, first the led flashes at the speed your shooting when your shooting and it also flashes at different intervals to tell you wot mode your in either on buttons, 1 trigger, 2 trigger or burst mode whenin trigger mode the extra rf button acts as a quick on/off for the trigger







here another pad of mine

it has hazers four mode on button kit, with speeds for halo cod4 cod5 and gears1+2
also i fitted a multi colored rol to match th ABXY which are lit and a lit dome (i used white leds in the dome , hoping it would be white but know its a dodgy green , but still looks good)
i dont have any pics of the back of it but i used the same buttons as in the elite pad of mine but only 2 of them.





this is my latest pad it's got the same rf as the elite pad but this time i wired a second smd led to player4 for rf indication light
also a blue rol and dome and a new mod im playing around with back lit triggers( i want to light the triggers but cant get hold of any transparent 1's)









and this is how i wired the red rf indication led for any1 who wants to giv it a go. i've not tried it with 3 / 4mode  sleeper and on button kits but it should work the same as this programmable of mine



this is a early pad of mine i put some blue led's and a sleeper kit in. also it's a wired pad so the led's are realy bright



yeah thats pretty much all of my pad mods worth showin off so far

i am workin on a ps2 dpad in a 360 pad but only time will tell if i get it to the point where im happy to take pic's of it n get the wiring sorted
« Last Edit: August 10, 2009, 12:28:37 PM by spurgurgle »

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline mikespartian114

  • Motor Mouth
  • *
  • Posts: 75
  • Post quality +0/-0
  • Acidmods User
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #56 on: August 10, 2009, 10:11:55 PM »
Here One of My Rapid fire LED is on the Dome .. no switches Sleeper Install





how did u hook up the xyab buttons. are they on a swicth or do they turn on when the controler is on???

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #57 on: August 11, 2009, 09:34:31 AM »
hi yeah the abxy and dome can either be lit constant or turn on wit the pad just a case of where to wire them to. if u use the same + as the rf kit's it should turn on with the pad on cg but i aint found a pin out on a mtrix that works the same as this at full voltage.

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: Official \"Show off your Rapid Fire/Modded Controller\"
« Reply #58 on: August 31, 2009, 02:29:32 PM »
here's my newest pad
black elite pad
white lit ABXY
red ring
red dome
blue rf indaction on pl4
and a adjustable rf installed








the to rf buttons (note rf is also on triggers when in correct mode.)


rf programming button placement insread of on the back or under the dome.



Post Merge: September 03, 2009, 12:25:47 PM
hey guys just thought i'd show you a update on a earlier pad,


so what do ya think???
« Last Edit: September 03, 2009, 12:25:47 PM by spurgurgle »

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline RiP

  • Chief squatting Hard
  • *
  • Posts: 27
  • Post quality +0/-0
  • Gender: Male
  • Gasoline in my veins, electricity in my brain
Re: Official "Show off your Rapid Fire/Modded Controller"
« Reply #59 on: September 06, 2009, 09:08:46 AM »
Here One of My Rapid fire LED is on the Dome .. no switches Sleeper Install






howto??
any tutorials out jet
its a button key, isent it? the originals would not glow like that...

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal