Author Topic: Redesigning the 360 Controller Tutorial  (Read 95988 times)

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Redesigning the 360 Controller Tutorial
« on: October 18, 2008, 02:47:48 PM »
DIGG THIS

Redesigning the 360 Controller is very easy to do with the simple tools like fiberglass resen and bondo body filler... There are many reasons to do this comfort, gaming edge, handicapted, or just for the fun of it.. in the first part we will look at the phisical part of this mod shaping the controller for the new electronics to fit.. In part two of the tutorial we will show how to re-map the analog sticks..In part Three we will introduce a secret chip and show how to add some of our other chips like rapid fire and rapid reload.. In the final Part we will look at the finished product..

Most Parts will either be added to the shop Also you can get some insane Rapid fire kits Here

Tools needed:

1: Fiberglass Mat
2: Fiberglass Resen
3: Bondo body Filler
4: 80,400,1000,2000 SandPaper Wet/Dry
5: Dremel or cutting tool
6: Primer heavy scratch fill type
7: Paint of desired color
8: Mini paint brushes
9: Xtra faceplate from coolmods.co.uk


From a second controller cut out the right side analog stick on out side of the ring and sand down so it looks like this with the 80 grit sand paper..


Now on another controller cut out the D-Pad location on the inner circle and sand smooth also cut away the left analog to fill later..


Now what you will notice it the outer diameter of the analog fits in the inner diameter of the removed D-pad location Thank you Microsoft.. Move it around till it fits perfect


Now sand the entire controller down with the 80 grit sand paper so the fiberglass has somthing to adhere to..


Now for the fiberglass work... (This Is very Dangerous stuff.. Do outside supervised.) you will need to mix the resen with the activater per the container directions. Make sure you have everything ready as you will have very little time to work with this material... once mixed brush some on the controller place the fiberglass mat on the controller the brush more resen on the mas working out all the air bubbles..


Once fiberglass hass cured (about 5 minutes) shape the controller with the 80 grit sandpaper...Repeat Fiberglass and Shaping untill you get the desired resultes dont panic about the minor dips and imperfections we will fix those later..


Next shoot the primer about 8 inches form the controller 3 thick coats allow 24 hours to cure..Once cured sand down with the 400 grit sand paper and look for the imperfections..


Now mix up the Bondo and the mix solution per the container instructions.. Apply Bondo to the dips and imperfections let cure for (about 1/2 hour) and sand smooth with the 80 Grit sand paper.. Repeat the Primer and the bondo process as many times as needed to get a smooth surface usualy about 3 times.


Shoot the controller With 3 more coats of primer and let cure for 24 hours... It should look really nice now..


I already moved the analog stick on the mobo (Tutorial comming soon.) im testing the fit in this picture before I paint the controller..


Ok after about five sprays of flat black and alot of wet sanding here is the finished paint job...






Here is a picture of the lower digital joysticks



« Last Edit: September 21, 2009, 01:50:31 PM by Mactastic Mendez »

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #1 on: October 18, 2008, 03:40:55 PM »
Part two relocating the analog Stick


Step one you will need a desoldering tool like the one pictured


Next you will need to remove the trigger potentiometer and assembly you will need to desolder the three points then pull the trigger off..


Now you will notice the points on the back of the controller for the analog stick. you will need to desolder all 14 points..


Six points are for the two potentiometers, Four points are for the push down button, and the last four are for supporting the analog stick to the PCB.


Here you can see with the desoldering tool the analog stick comes off cleanly..


Once the analog stick is removed you will need to clip off the four support post and bend the 10 pins to the side ..


As you can see I place some duel sidded sticky tape on the bottom to allow for placement on the PCB.


Now I placed the analog stick in its new position where the D-pad used to be..


Next solder wires to all pins so they make contact to there original positions. As you can see here I only soldered three wires of the 10 needed to be soldered..


Finaly solder the trigger assemble back to its original position...
« Last Edit: January 07, 2010, 05:09:23 PM by modded matt »

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #2 on: October 18, 2008, 03:41:50 PM »
The Final Tut Will be Posted Tonight



In the mean time check out this rapid Fire

3 mode Dual Rapid fire and 3 mode COD4 Edition [rapidreload / rapidfire ] "Instock Now"
100 kits only for the first batch ETA 10/03/08   :tup:
2nd Batch EAT 10/24/08  :tup:

Get your kits now at Acidmods ShopUSA

Here is the Video For 3 mode Dual Rapid fire kit & COD4 Edition RapidReload 3 Mode kit


« Last Edit: November 07, 2008, 11:58:03 AM by SYSTEM »

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #3 on: October 18, 2008, 03:42:08 PM »




...
« Last Edit: November 06, 2008, 04:10:22 PM by SYSTEM »

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #4 on: October 18, 2008, 04:23:49 PM »
More comming this weekend

Offline Winterz117

  • Granny Spanker
  • *
  • Posts: 415
  • Post quality +0/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #5 on: October 19, 2008, 10:12:30 AM »
ooh im really exited to see finished great work man

Offline redryno1221

  • Granny Spanker
  • *
  • Posts: 430
  • Post quality +0/-0
  • Gender: Male
    • Redrynotuts
Re: Redesigning the 360 Controller Tutorial
« Reply #6 on: October 19, 2008, 01:02:41 PM »
can't wait to see how it turns out :)


Offline StealthedHunter

  • Who Farted ???
  • *
  • Posts: 236
  • Post quality +0/-0
  • Gender: Male
  • Can't See me
Re: Redesigning the 360 Controller Tutorial
« Reply #7 on: October 20, 2008, 04:12:43 PM »
wow this looks great :rofl: Can't wait for my new black controlelr to come in a few days im going to definately do this whole set of tutorials to it. Will all of the tutorials be up in the next week?


Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #8 on: October 21, 2008, 03:45:37 AM »
wow this looks great :rofl: Can't wait for my new black controlelr to come in a few days im going to definately do this whole set of tutorials to it. Will all of the tutorials be up in the next week?

hopfully

Offline StealthedHunter

  • Who Farted ???
  • *
  • Posts: 236
  • Post quality +0/-0
  • Gender: Male
  • Can't See me
Re: Redesigning the 360 Controller Tutorial
« Reply #9 on: October 21, 2008, 07:39:26 AM »
Sweet.How much is that fiberglass resin and bondo anyways??


Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #10 on: October 21, 2008, 07:48:41 AM »
Sweet.How much is that fiberglass resin and bondo anyways??

$10 each I will post more tonight hopfully..

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: Redesigning the 360 Controller Tutorial
« Reply #11 on: October 21, 2008, 07:54:32 AM »
great work this mite help some people how to spay as well
come to the rite place if you kiss admins as they promote you to admin.

Offline Winterz117

  • Granny Spanker
  • *
  • Posts: 415
  • Post quality +0/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #12 on: October 21, 2008, 11:55:26 AM »
yeah dude im doing this i cant wait to see what the new chip does :)

Offline StealthedHunter

  • Who Farted ???
  • *
  • Posts: 236
  • Post quality +0/-0
  • Gender: Male
  • Can't See me
Re: Redesigning the 360 Controller Tutorial
« Reply #13 on: October 21, 2008, 01:14:26 PM »
think u could just give us a hint about the chip ><


Offline Winterz117

  • Granny Spanker
  • *
  • Posts: 415
  • Post quality +0/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #14 on: October 21, 2008, 03:50:25 PM »
lol just wait till he announces it

Offline StealthedHunter

  • Who Farted ???
  • *
  • Posts: 236
  • Post quality +0/-0
  • Gender: Male
  • Can't See me
Re: Redesigning the 360 Controller Tutorial
« Reply #15 on: October 21, 2008, 05:28:18 PM »
Hey could you give clearer instructions on cutting out the right analog and d pad because yours looks like it was cut perfectly like it just came apart or something


Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #16 on: October 22, 2008, 03:28:41 AM »
Hey could you give clearer instructions on cutting out the right analog and d pad because yours looks like it was cut perfectly like it just came apart or something
ok I will take some photo's

Offline StealthedHunter

  • Who Farted ???
  • *
  • Posts: 236
  • Post quality +0/-0
  • Gender: Male
  • Can't See me
Re: Redesigning the 360 Controller Tutorial
« Reply #17 on: October 22, 2008, 06:16:52 AM »
k thanx


Offline Tec_

  • EL-Wire King
  • E = MC² Mad Scientist
  • *
  • Posts: 1869
  • Post quality +2/-0
  • Gender: Male
  • EL Wire King
Re: Redesigning the 360 Controller Tutorial
« Reply #18 on: October 22, 2008, 06:37:15 AM »
Take a look at evercoat everglass its so much better than bondo. It flexes, ware as if you were to torque bondo it would crack. Its easer to sand and it cures much faster than bondo. Just a tip I wish I would have had before I started working with bondo.

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #19 on: October 22, 2008, 06:51:55 AM »
Take a look at evercoat everglass its so much better than bondo. It flexes, ware as if you were to torque bondo it would crack. Its easer to sand and it cures much faster than bondo. Just a tip I wish I would have had before I started working with bondo.
Thanks Tec_

Offline StealthedHunter

  • Who Farted ???
  • *
  • Posts: 236
  • Post quality +0/-0
  • Gender: Male
  • Can't See me
Re: Redesigning the 360 Controller Tutorial
« Reply #20 on: October 22, 2008, 12:04:00 PM »
Is that tutorial you planned on putting up last night ganna be up tonight? :beg:
I wish you wouldnt of posted this until you had it all done because I have no thing else to do but sit here and think about how it is goign to look and keep checking if youve posred mroe about it or not  :laughing:


Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #21 on: October 22, 2008, 12:15:05 PM »
Is that tutorial you planned on putting up last night ganna be up tonight? :beg:
I wish you wouldnt of posted this until you had it all done because I have no thing else to do but sit here and think about how it is goign to look and keep checking if youve posred mroe about it or not  :laughing:

yes more to come I got blocked by wife last night...

Offline StealthedHunter

  • Who Farted ???
  • *
  • Posts: 236
  • Post quality +0/-0
  • Gender: Male
  • Can't See me
Re: Redesigning the 360 Controller Tutorial
« Reply #22 on: October 22, 2008, 12:20:31 PM »
hey your one of the lucky ones out of us that get to get blocked by a wife  :hifive:


Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #23 on: October 22, 2008, 05:02:19 PM »
added one picture
 more comming soon

Offline StealthedHunter

  • Who Farted ???
  • *
  • Posts: 236
  • Post quality +0/-0
  • Gender: Male
  • Can't See me
Re: Redesigning the 360 Controller Tutorial
« Reply #24 on: October 22, 2008, 07:45:23 PM »
How soon ><


Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #25 on: October 23, 2008, 03:23:06 AM »
How soon ><

I did the work over at Play N Trade shop I used there camamra im waiting for rich to email them to me...

Offline StealthedHunter

  • Who Farted ???
  • *
  • Posts: 236
  • Post quality +0/-0
  • Gender: Male
  • Can't See me
Re: Redesigning the 360 Controller Tutorial
« Reply #26 on: October 23, 2008, 06:37:31 AM »
aww i was hoping for last night but guess not


Offline StealthedHunter

  • Who Farted ???
  • *
  • Posts: 236
  • Post quality +0/-0
  • Gender: Male
  • Can't See me
Re: Redesigning the 360 Controller Tutorial
« Reply #27 on: October 27, 2008, 03:46:40 PM »
whats happening with this?


Offline Alien_X

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1010
  • Post quality +3/-0
  • Gender: Male
Re: Redesigning the 360 Controller Tutorial
« Reply #28 on: October 28, 2008, 01:23:00 AM »
On behalf of everyone I Would like to say:

FAAAKKKEE

 :taunt:

Sigs by Alien_X
www.ax-elec.com

Offline StealthedHunter

  • Who Farted ???
  • *
  • Posts: 236
  • Post quality +0/-0
  • Gender: Male
  • Can't See me
Re: Redesigning the 360 Controller Tutorial
« Reply #29 on: October 28, 2008, 07:17:53 AM »
are u serious :confused: naa ur lyeing if it fake i will have to stab somebody just giving everyone a heads up. I thinkk system might just be w8ing to do something before he posts more maybe hopefully :beg:


 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal