Author Topic: Better alternative to building a programmer  (Read 11264 times)

Offline XsavioR

  • E = MC² Mad Scientist
  • *
  • Posts: 1504
  • Post quality +2/-3
  • Gender: Male
Better alternative to building a programmer
« on: October 02, 2008, 05:10:32 AM »
Microchips PICkit2  Retail price of $34.99
http://www.microchipdirect.com/productsearch.aspx?Keywords=PG164120

Directly interfaces with MPLAB IDE, Microchips FREE all inclusive IDE. With simulator.
« Last Edit: October 02, 2008, 07:09:00 AM by Mactastic Mendez »

Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
Re: Better alternative to building a programmer
« Reply #1 on: October 03, 2008, 06:28:10 PM »
It does not come with an adapter. You will have to build one.
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

Offline XsavioR

  • E = MC² Mad Scientist
  • *
  • Posts: 1504
  • Post quality +2/-3
  • Gender: Male
Re: Better alternative to building a programmer
« Reply #2 on: October 03, 2008, 07:53:20 PM »
Yes... if you dont program the chip in circuit, But thats simple enough... a 1.99 board from radioshack and a 5 pin header 5 cents.. But the idea is to program the chip in circuit.

Offline 802Chives

  • Sargeant at Arms
  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1304
  • Post quality +10/-0
  • Gender: Male
Re: Better alternative to building a programmer
« Reply #3 on: October 06, 2008, 02:06:25 PM »
for $50 you can get the pickit2 and the low pin count demo board.  the demo board has 4 leds, a potentiometer on PortA,0 (gpio,0) pulled up reset button on PortA,3 (gpio,3) and ample room for prototyping.

http://www.microchipdirect.com/productsearch.aspx?Keywords=DV164120

It should be noted that all the software the supports Pickit2(MPLAB IDE, and pickit2 software) is free and is supported by microchip, and remember that is what you are really paying for.  Pickit2 can also be flashed with updated firmware which means that most new chips will be supported so you won't have to wait on legacy issues.

I can't reccomend this kit enough for noob programmers, it will definately reduce the initial pain of getting into microcontrollers.  Programming in circuit is the cat's meow, but just remember the blocking diode so that you don't try to power your whole circuit from the programmer.


Offline jbizzel

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Better alternative to building a programmer
« Reply #4 on: June 14, 2009, 05:02:21 AM »

Offline eNeRGy

  • BioLogic Mods
  • Ω Allumnist Ω
  • *
  • Posts: 102
  • Post quality +0/-0
  • Gender: Male
Re: Better alternative to building a programmer
« Reply #5 on: July 27, 2010, 02:27:23 PM »
Or buy this one i have and get a serial cable works like a charm.

http://cgi.ebay.com/RS232-H-SPEED-PIC-Programmer-100-satisfied-guaranteed-/380192402303
..::BioLogic Mods::..
__"Why play fair?"__

Offline eNeRGy

  • BioLogic Mods
  • Ω Allumnist Ω
  • *
  • Posts: 102
  • Post quality +0/-0
  • Gender: Male
Re: Better alternative to building a programmer
« Reply #6 on: August 08, 2010, 04:09:18 PM »
For less if you already have a programmer and just are looking for the PICkit to add to the icsp option on your programmer you can buy a PICkit2 Clone off ebay from a trusted seller for about $25.
..::BioLogic Mods::..
__"Why play fair?"__

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Better alternative to building a programmer
« Reply #7 on: August 09, 2010, 05:30:26 AM »
did you realy just bump your own reply? post count boosting much?

Offline eNeRGy

  • BioLogic Mods
  • Ω Allumnist Ω
  • *
  • Posts: 102
  • Post quality +0/-0
  • Gender: Male
Re: Better alternative to building a programmer
« Reply #8 on: August 09, 2010, 09:03:37 AM »
did you realy just bump your own reply? post count boosting much?

my bad matt i didnt notice sorry.
..::BioLogic Mods::..
__"Why play fair?"__

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: Better alternative to building a programmer
« Reply #9 on: May 14, 2011, 09:53:37 AM »
I recently ordered a Pickit2 and should receive it today and I was wondering, do I need to have the adaptor or the demo board? Cant I just connect the ICSP part to a breadboard and connect the pins to the corresponding pins for the PIC?

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: Better alternative to building a programmer
« Reply #10 on: May 14, 2011, 10:23:14 AM »
I recently ordered a Pickit2 and should receive it today and I was wondering, do I need to have the adaptor or the demo board? Cant I just connect the ICSP part to a breadboard and connect the pins to the corresponding pins for the PIC?

yes you can do that however if the PIC is part of a another circuit on the breadboard you will need to take measures to protect the application circuit from programming voltage and from interfering with programming signals

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: Better alternative to building a programmer
« Reply #11 on: May 14, 2011, 10:40:02 AM »
yes you can do that however if the PIC is part of a another circuit on the breadboard you will need to take measures to protect the application circuit from programming voltage and from interfering with programming signals

Ok phew thats good lol. Thanks hyper

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal