[bustinthejustin]

Okay sorry about all the questions lately, but I've decided to start on my psp slim and I've just been reading a lot, but haven't really had any hands-on experience yet. So my question: Since the soundboard already has a resistor on it, doesn't it mean I can only use blue leds? Also, any tips for where to run wires? I think on the phat it was behind the lcd cage. What about slim?

[GhoSt_Death]

It has 2 resistors on the + and - of the speaker imput. You can use most normal types of smt leds, reds may need a extra resistor?. I have never modded a slim so Im not sure where to mount. Oh on the phat it wasn't behind lcd cage, the most common spot was behind the wifi.

Search and you shall find.

[ApheX]

If you go here, there is a guide that will show you where to solder and yes you can run the wires along the top of the psp like that phat version.

[bustinthejustin]

Yeah I saw that. So basically most leds should work and I should route wires along the top?

[LaCozTe-2028]

You could put the chip under the meme's cage there's alot of space thats where i put my chips if its to big just use your dremel to get rid of edges

[bustinthejustin]

yeah thanks. That's where I was planning to put it. When I actually get the board, and leds and stuff, I'll start wiring stuff up, THEN I'll figure out where to put things.