Author Topic: PSP External Dualshock Controller  (Read 147959 times)

Offline Blizzrad

  • Chaos Lover
  • *
  • Posts: 267
  • Post quality +0/-0
Re: Single Connector External DualShock Controller
« Reply #60 on: June 23, 2008, 06:26:07 AM »
*deleted
« Last Edit: January 16, 2009, 08:54:20 PM by Blizzrad »

Offline FaT3oYCG

  • Registered BST
  • Granny Spanker
  • *
  • Posts: 444
  • Post quality +0/-0
  • Gender: Male
  • (Modder for hire) Live in your world, Mod in ours.
    • Modern-Gamer.co.uk
Re: Single Connector External DualShock Controller
« Reply #61 on: June 23, 2008, 09:02:34 AM »
ok thanks man ill look forward to them, one more question, do you need the board that is in the ps1/2 controller to wire to or can i connect the wire directly to the connector and analouge sticks, if i do need it then i think i need a new controller, also because this is not like when its connected to the psp do i need the chip where you connect the second analouge stick to or can you remove that and just wire to the pads where the pins were?

thanks in advance

*searches desperateley for a 23 - 30 pin connector*
----- F@T3oYCG -----

Offline gr8npwrfl

  • Acid Modder
  • *
  • Posts: 582
  • Post quality +0/-0
  • Gender: Male
  • Ignorance is not fatal it can be cured
Re: Single Connector External DualShock Controller
« Reply #62 on: June 23, 2008, 11:36:19 PM »
Sparkfun electronics has 30 pin IPOD connectors and plugs

Micro size


VoX

  • Guest
Re: Single Connector External DualShock Controller
« Reply #63 on: July 23, 2008, 02:12:47 AM »
Sparkfun electronics has 30 pin IPOD connectors and plugs

Micro size

ZIF Connectors?

Offline folklord36

  • Research & Development
  • Acid Modder
  • *
  • Posts: 810
  • Post quality +0/-0
  • Gender: Male
Re: Single Connector External DualShock Controller
« Reply #64 on: July 23, 2008, 10:09:54 AM »
off topic but spotted this while looking for the connector http://www.sparkfun.com/commerce/product_info.php?products_id=8651 add 2 resistors to the 2 non present pins and solder inputs to it you got a sound mod board for 5usd includeing lm386 board and resistors! i looked all over sparkfun too vox they dont have them anymore they will prob get more soon digikey has all linds just gota look at the data sheet to pick the one you want just search 30 pin there

Offline sethion

  • Ω Allumnist Ω
  • *
  • Posts: 101
  • Post quality +0/-0
  • Gender: Male
Re: Single Connector External DualShock Controller
« Reply #65 on: August 24, 2008, 03:30:24 PM »
How much modding experience will i need to be able to make this. I am fairly good at soldering after doing electronics for two years at school yet not all that great at case mods.

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Single Connector External DualShock Controller
« Reply #66 on: August 24, 2008, 10:28:16 PM »
fairly good
You've got to me a LOT more than "Fairly good" at only soldering to do this.

Offline kink192

  • Acid Modder
  • *
  • Posts: 916
  • Post quality +1/-0
  • Gender: Male
Re: Single Connector External DualShock Controller
« Reply #67 on: August 25, 2008, 08:46:11 AM »
you might want to have some fairly good equipment as well. very fine tipped iron, steady hands, all the necessary stuff.
It's been a long time

Offline sethion

  • Ω Allumnist Ω
  • *
  • Posts: 101
  • Post quality +0/-0
  • Gender: Male
Re: Single Connector External DualShock Controller
« Reply #68 on: August 25, 2008, 01:31:13 PM »
My dad is a electrician and has soldering irons of various sizes and solder ect so il have all the nessessary stuff, The only item i may not have is the 25 pin connectors but im sure some of the junk in my house has a couple lemme just have a rummage to find out.

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Single Connector External DualShock Controller
« Reply #69 on: August 25, 2008, 01:37:41 PM »
...Like I said. If you're just "fairly good" at soldering, you'll be short a psp dude. You ARE going to screw up unless you're really good at soldering.

Offline sethion

  • Ω Allumnist Ω
  • *
  • Posts: 101
  • Post quality +0/-0
  • Gender: Male
Re: Single Connector External DualShock Controller
« Reply #70 on: August 25, 2008, 01:44:23 PM »
Which mods should i do as more practice?
I was thinking of doing the led mod as i heard that it is the best one for getting better at Soldering. But i want to also try the dual nub mod with the razorx as an alternative to this one, but i cant find a tut for the slim installation, unless its the same.

Offline gr8npwrfl

  • Acid Modder
  • *
  • Posts: 582
  • Post quality +0/-0
  • Gender: Male
  • Ignorance is not fatal it can be cured
Re: Single Connector External DualShock Controller
« Reply #71 on: August 25, 2008, 01:59:45 PM »
Find some old printed circuit boards
with surface mount chips on them.

Practice re soldering the chips and see how
are it is to solder one and not get solder on the one
next to it.

If you make a mistake see what it takes to remove
the soldering without damaging the board

Practice makes perfect.



Offline Blizzrad

  • Chaos Lover
  • *
  • Posts: 267
  • Post quality +0/-0
Re: Single Connector External DualShock Controller
« Reply #72 on: August 25, 2008, 02:04:34 PM »
*deleted
« Last Edit: January 16, 2009, 08:54:48 PM by Blizzrad »

Offline sethion

  • Ω Allumnist Ω
  • *
  • Posts: 101
  • Post quality +0/-0
  • Gender: Male
Re: Single Connector External DualShock Controller
« Reply #73 on: August 25, 2008, 03:07:18 PM »
Hmm well ill get some practice in and when i feel i am ready i will give it a crack on an older psp of mine. Although if that other one does come out soon ill prolly wait for that as it does seem alot less work for the same result =) But atm this one still stands as the main one ill try.

Offline JWhiteLightning

  • BANNED
  • Motor Mouth
  • *
  • Posts: 77
  • Post quality +0/-0
  • Gender: Male
  • Because Im CWN
Re: Single Connector External DualShock Controller
« Reply #74 on: August 26, 2008, 06:01:25 PM »
The hardest soldering part is soldering onto the ps2 controller ribbon cable, lucky i had 2, becuase i melted the first one. I had an old ipod nano(broken) that i toke apart for the adapter. When i took it apart, it looked like there is no place to solder to it.

Offline hellazombies

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 69
  • Post quality +0/-0
Re: Single Connector External DualShock Controller
« Reply #75 on: August 26, 2008, 06:11:03 PM »
thats hella sick

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: Single Connector External DualShock Controller
« Reply #76 on: September 01, 2008, 08:30:41 AM »
there are some ps2 controllers that have no fpc connecter.  I learned that the hard way

Offline cameron14

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 50
  • Post quality +0/-0
Re: Single Connector External DualShock Controller
« Reply #77 on: September 19, 2008, 10:57:32 PM »
u should make it so u can use the right analog

Offline squee

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +0/-0
Re: Single Connector External DualShock Controller
« Reply #78 on: September 26, 2008, 08:48:27 PM »
Someone (I don't remember who now) told me recently that they were working on doing exactly that, so I wouldn't be surprised if we see it here soon too.

I actually tried it and it didn't work. Don't know why. I followed the diagram to the letter, but no such luck...To my knowledge, nobody actually every did it, just the diagram.

Offline squee

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +0/-0
Re: Single Connector External DualShock Controller
« Reply #79 on: September 28, 2008, 08:15:27 AM »
Yeah, I was actually working on it for a bit, but now I have found some better componants to use than reed relays. So i am working again.

When you figure it out, please let me know. I have it all pretty much wired up, just gotta replace whatever you find necessary and put it back in.

Offline LaCozTe-2028

  • BANNED
  • E = MC²
  • *
  • Posts: 353
  • Post quality +0/-0
  • Gender: Male
  • I love My Lacoste shirts
Re: Single Connector External DualShock Controller
« Reply #80 on: September 29, 2008, 02:56:51 PM »
very smexy blizzard ima do the same thing with my see throught blue controller plus ill add leds

try droping it again
my retared friend fixed by droping it
 1Sniper- not to be an :censored: but, its special friend

Offline SN!P3R

  • Millennium Poster
  • *
  • Posts: 1444
  • Post quality +0/-10
  • Gender: Male
Re: Single Connector External DualShock Controller
« Reply #81 on: October 07, 2008, 06:47:48 PM »
can i use teh connector from an ipod video and the usb female? i scrapped the ipod cause the headphone jacks busted, and the screen as well. oh and i found it on the road  :w00t: so im gonna use the HD for the PSP HD mod, and the connectors for potentially this?
BEST 360 MODDING
HELP OUR ECONOMY!

360 MASHUP THREAD

Offline Blizzrad

  • Chaos Lover
  • *
  • Posts: 267
  • Post quality +0/-0
Re: Single Connector External DualShock Controller
« Reply #82 on: October 07, 2008, 08:36:08 PM »
*deleted   
« Last Edit: January 16, 2009, 08:55:05 PM by Blizzrad »

Offline SN!P3R

  • Millennium Poster
  • *
  • Posts: 1444
  • Post quality +0/-10
  • Gender: Male
Re: Single Connector External DualShock Controller
« Reply #83 on: October 08, 2008, 01:10:32 PM »
hell, ill get a robot to sodder the pins  :huh:
BEST 360 MODDING
HELP OUR ECONOMY!

360 MASHUP THREAD

Offline menwhar

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
Re: Single Connector External DualShock Controller
« Reply #84 on: October 24, 2008, 01:56:56 PM »
are u able to put up what you acually didi because im intrested in doing it as well I have every thing except the female and male 23-30 pin :psp: :drunk:

Offline Blizzrad

  • Chaos Lover
  • *
  • Posts: 267
  • Post quality +0/-0
Re: Single Connector External DualShock Controller
« Reply #85 on: October 28, 2008, 12:20:45 PM »
*deleted
« Last Edit: January 16, 2009, 08:55:18 PM by Blizzrad »

Offline alexdenipaul

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Single Connector External Dualshock Controller
« Reply #86 on: October 20, 2009, 11:03:29 AM »
Brilliant mate!  :tup:  Love the way you can turn the psp off via the analog on/off button. i remember there being a rumble mod for the psp, could you make this controller mod, but incorporate the rumble using the one's already in the controller? so say when you get a load noise from getting smacked up in a game, the controller rumbles.


He’s got a point. Seriously, this is old news. I did this a long time ago with a psp2tv adapter. It was used for video output on the fat psp before sony made the psp slim wireless internet. But all you had todo was hook up a few spliiters that came with the kit where the button pads hooked in. You’d plug the button pads into one plug and the psp2tv into the other, and just hook a ps1 or ps2 controller tothe psp2tv dock.

Offline FaT3oYCG

  • Registered BST
  • Granny Spanker
  • *
  • Posts: 444
  • Post quality +0/-0
  • Gender: Male
  • (Modder for hire) Live in your world, Mod in ours.
    • Modern-Gamer.co.uk
Re: PSP External Dualshock Controller
« Reply #87 on: October 21, 2009, 07:34:20 AM »
o_O what a bump
----- F@T3oYCG -----

Offline Barnsey

  • Chaos Lover
  • *
  • Posts: 260
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PSP External Dualshock Controller
« Reply #88 on: October 22, 2009, 03:32:33 AM »
almost a year  :boxed:


 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal