Author Topic: home made psp jewels please comment.  (Read 7807 times)

Offline deathshells

  • Chief squatting Hard
  • *
  • Posts: 20
  • Post quality +0/-0
  • Gender: Male
  • Certified Fur:censored:
home made psp jewels please comment.
« on: October 04, 2009, 11:27:43 AM »
 :help: ok well i asked my school wether i could borrow the machine for doing mine and my brothers psp jewel...short answer was a dead no. (apparently because it took too long to set up. :angry:) any way i thought hmm how the hell can i try and get a jewel on the cheap so i got out my dremel and got to work... i grabbed a cd case cut out a okish circle and then engraved with a collection of bits i have.... i think it looks ok but not really worhty of a psp jewel (you may think otherwise) please tell me wether these are of any good quality, thanks:(the one on the left was the first one.... prefer the bio hazard personally)



biohazard closeup


random circle thingy closeup






thanks if you comment!

(and sorry for the massive images... i used my phone (w810) with a better cam driver so images are now massive!

UPDATE!!!: LOL

heres a few more i made... they are kinda half complete but  i havent got round to doing the rest of it.













theres your little bad quality update  :huh: :rofl: :laughing: :tup:

SMILIE OVERLOAD!
 :angry: :censored: :clap: :confused: :cool: :drunk: :help: :whoosh: :whoosh: :huh: :w00t: :wacko: :rofl: :winker: :boxed: :#1: :laughing: :fear: :sadno: :nono: :victory: :yess: :psp: :x: :faint: :greedy: :beg: :cry2: :dntknw: :dribble: :eyebrow: :hifive: :taunt: :tup: bud

sorry.
« Last Edit: October 22, 2009, 10:10:24 AM by deathshells »
If everything is going well, you've probably overlooked something.

Offline TwisTtheTwiTcH

  • Blogs & Media Editor-In-Chief
  • Acid Modder
  • *
  • Posts: 782
  • Post quality +12/-2
  • Gender: Male
  • Within my shadows there are no sins
Re: home made psp jewels please comment.
« Reply #1 on: October 04, 2009, 11:42:24 AM »
Decent. I like the bio hazard one. Granted what you had to work with, you did great. Just sand the edges a little.

-TwisT

Offline dedafmonteur

  • E = MC² Mad Scientist
  • *
  • Posts: 2049
  • Post quality +4/-0
  • Gender: Male
Re: home made psp jewels please comment.
« Reply #2 on: October 04, 2009, 12:20:00 PM »
verry nice for the tools u had!

Offline Havoced

  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Gender: Male
  • Modaholic
Re: home made psp jewels please comment.
« Reply #3 on: October 05, 2009, 02:23:17 AM »
I think the biohazard looks great for what you had to work with! I suggest testing it with some LEDs behind it (assuming you were planning to have LEDs behind it) and seeing how it looks with some light.

Offline W-Gaming5

  • Millennium Poster
  • *
  • Posts: 1129
  • Post quality +1/-0
  • Gender: Male
Re: home made psp jewels please comment.
« Reply #4 on: October 05, 2009, 05:09:43 PM »
:censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored: v
« Last Edit: July 29, 2012, 08:13:23 PM by W-Gaming5 »
:censored:

Offline ryan0

  • I EAT STUFF
  • Millennium Poster
  • *
  • Posts: 1128
  • Post quality +0/-0
  • Gender: Male
  • I LIEK CHEEEEZE
Re: home made psp jewels please comment.
« Reply #5 on: October 07, 2009, 02:43:11 PM »
I say this all the time but people never seem to heed my advice,cut a stencil out of cellophane and spray opaque lacquer through the stencil onto the plastic and BAM you got an awesome,accurate and clean design on your jewel that catches the light really well.

Oh and also :
1000th POST :censored: YEAH!!
Derp.

Offline asif

  • Chief squatting Hard
  • *
  • Posts: 18
  • Post quality +0/-0
Re: home made psp jewels please comment.
« Reply #6 on: October 08, 2009, 09:08:03 PM »
how did you get them cut into perfect circles?

Offline Cookie Monster

  • I SMELL SOMETHING
  • CyberPyrot WannaBe
  • *
  • Posts: 303
  • Post quality +6/-0
  • Gender: Male
  • GIMMIE COOKIE
Re: home made psp jewels please comment.
« Reply #7 on: October 09, 2009, 03:28:51 PM »
Its magic ;). No really with a stencil or had something round on top and sanded around it

thanks toad and indy for the sigglys

Offline deathshells

  • Chief squatting Hard
  • *
  • Posts: 20
  • Post quality +0/-0
  • Gender: Male
  • Certified Fur:censored:
Re: home made psp jewels please comment.
« Reply #8 on: October 21, 2009, 09:34:13 AM »
Sorry i hav'nt checked the thread since i  made it! wow thanks guys! i didn't think they were that good but according to you guys they are. i response to asif, i just put a piece of paper over the back bit of the psp and traced around the dipped area. then after that i measured with a compass and added an extra 3mm to its radius and drew it again. then i just traced with a cd writing pen onto the cd case and went from there with my dremel starting off with a cutting disk for the main part and then moving on to a sandpaper bit for the rest... finishing it off with a strage fluffy thing to go on the end of it for smoothness! thanks everybody for all the compliments!
If everything is going well, you've probably overlooked something.

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: home made psp jewels please comment.
« Reply #9 on: October 21, 2009, 10:53:22 AM »
Mm not bad what did use to do yours seems you went lil to ruff around the jewel.

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline deathshells

  • Chief squatting Hard
  • *
  • Posts: 20
  • Post quality +0/-0
  • Gender: Male
  • Certified Fur:censored:
Re: home made psp jewels please comment.
« Reply #10 on: October 21, 2009, 12:36:33 PM »
i used a dremel with about 3-4 different bits over all. the picture makes it look worse than it really is but i admit it is a little rough around the edges. im not to good with the smoothing side of things  :laughing:
If everything is going well, you've probably overlooked something.

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: home made psp jewels please comment.
« Reply #11 on: October 21, 2009, 07:38:40 PM »
Here one i did awhile ago..

« Last Edit: October 22, 2009, 09:43:42 AM by Blazinkaos »

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline deathshells

  • Chief squatting Hard
  • *
  • Posts: 20
  • Post quality +0/-0
  • Gender: Male
  • Certified Fur:censored:
Re: home made psp jewels please comment.
« Reply #12 on: October 22, 2009, 08:45:39 AM »
Here one i did awhile ago..



that looks like an amazing circle! did you cut it or did you buy one? really nice. is it me or the photo showing the engraving to be a little heavy and squigglyish. sorry if you took that the wrong way and by no means are mine perfect i'm just askin.  :winker: looks quite thick compared to mine as well! im oly usin cheap a$$ cd cases lol. the bio hazard on cracked in the corner recently so im a little dissapointed but they were only a test so ah well.
« Last Edit: October 22, 2009, 08:47:28 AM by deathshells »
If everything is going well, you've probably overlooked something.

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: home made psp jewels please comment.
« Reply #13 on: October 22, 2009, 09:41:02 AM »
Yea i did that all with dremel i didnt manage to clean up my logo tho havent done it but yea everything is done by a dremel. It 3 or 4 mm thick plexi glass i did it on.

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline deathshells

  • Chief squatting Hard
  • *
  • Posts: 20
  • Post quality +0/-0
  • Gender: Male
  • Certified Fur:censored:
Re: home made psp jewels please comment.
« Reply #14 on: October 22, 2009, 10:06:43 AM »
ah cool. nice circle... howd you get it that smooth!
If everything is going well, you've probably overlooked something.

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: home made psp jewels please comment.
« Reply #15 on: October 23, 2009, 04:06:07 PM »
Used a hand sander and fine sand paper.

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal