Author Topic: Rapid Fire Method (No Chip)  (Read 369825 times)

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Rapid Fire Method (No Chip)
« on: April 02, 2008, 07:13:39 PM »
Are you tired of those complicated Microcontrollers or those expensive ebay kits well here at acidmods we say :censored: em. We are tired of people stealing our work to try and make a quick buck... So to all you Ebay scalpers Kiss my ASSidMods  :taunt: you got served...Here is the Xbox 360 Rapid Fire Tutorial. In this tutorial all you will need is a button and some wire..

This does not work on the newer Wireless CG version of board or on the newer Wired CL version board

Here is the wiring Ground on LED 1 to Momentary Switch to middle pin on trigger!!! That Easy!!!





 

You will most likly hear many things about this most of it will be from the scalpers trying to justify charging you $30 for a simple $2 chip and some wire..

My chip is way faster then that... Not true we tested is against our 50Ns code and out 30Ns code anything faster and the controller sees it as full on and you get irratic responces...

That new method will fry your controller.... Altho we have not tested it for long extensive times from the process we are doing and the basic electronics applying ground to the potentiometer of the trigger wil not cause any damage to it as there is always a ground pressent to the trigger it is just a variable ground...

Unlike our SpitFire these people selling this stuff on ebay are scalpers we have always believed our code and knowledge should be free to the public and when we developed the spitfire we wanted to give you guys added features like combo's and mapping buttons not just rapid fire.. Now that every one in the world can have rapid fire with just basic stuff from radioshack we will wait here patiently for the accusations to fly  :rofl:
« Last Edit: March 24, 2010, 11:42:25 AM by modded matt »

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #1 on: July 27, 2008, 06:33:26 PM »
KingMike will edit this with the images needed... We have been holding back on this for months now but it is time to stop the bull :censored: theives making money off of our members...
« Last Edit: July 27, 2008, 06:38:43 PM by SYSTEM »

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #2 on: July 27, 2008, 06:46:34 PM »
There's no way... Can't wait to see this one, I may actually do this then...

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #3 on: July 27, 2008, 06:53:33 PM »
Image Posted...

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #4 on: July 27, 2008, 06:59:44 PM »
There's no way it's that easy...no freakin' way... I'm trying this asap when I get home later in the week

Offline TW1NKY

  • E = MC²
  • *
  • Posts: 337
  • Post quality +0/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #5 on: July 27, 2008, 07:09:37 PM »
I'm going to get a switch to try this out. Thanks, this seems rediculously easy :hifive:


Offline kink192

  • Acid Modder
  • *
  • Posts: 916
  • Post quality +1/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #6 on: July 27, 2008, 07:39:47 PM »
there is no way  this can be possible, the led ground would have to be alternating on and off for it to work and i dont think it does that...does it?
It's been a long time

Offline KingMike_OS

  • Shop Owner - Products & Support
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 929
  • Post quality +14/-0
  • Gender: Male
  • R&D
    • Modding Shop At the end of the Universe
Re: New Rapid Fire Method (No Chip)
« Reply #7 on: July 27, 2008, 07:49:23 PM »
Will i'm god than The Great King made it work


PS : Make sure the Wire the gose to the LED is the LED that is on the right port

So for EX if the controller on port 2 wire the ground to the LED on left insted of right

« Last Edit: July 27, 2008, 08:44:16 PM by KingMike_OS »

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #8 on: July 27, 2008, 08:04:47 PM »
I still say no way until that YouTube vid works o_O


EDITEDITEDITEDIT:
No. :censored:ing. Way. It WORKS?! I LOL'D at you putting the controller together =P But, sadly, I'm just as fast with a pistol using just my finger. Imagine using the rapid fire then. Awesome. I guess I'll do this when I get home, that's pretty sweet.

I'm still..._kinda_ doubting it until I try for myself...it just seems...way too easy...
« Last Edit: July 27, 2008, 08:13:22 PM by pspkicks316 »

Offline kink192

  • Acid Modder
  • *
  • Posts: 916
  • Post quality +1/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #9 on: July 27, 2008, 08:13:49 PM »
omg...i cant believe it...how???you guys have no idea how flabbergasted i am, kingmike_os, you have earned the title of god...same with system[i dont know your real name] wow...im just blown away dude
It's been a long time

Offline Ch4rL13

  • R4z3R
  • Acid Modder
  • *
  • Posts: 869
  • Post quality +0/-0
  • Gender: Male
    • R4z3R Gaming
Re: New Rapid Fire Method (No Chip)
« Reply #10 on: July 27, 2008, 08:40:07 PM »
amazing....
i was about to spend like 30 bux on a kit then i see this, AMAZING
i just need a switch now, im so doing it
thx for releasing this

btw 2 things, why did you wait so long to release?
and is this any different then the ones with the kit? like is the kit version going to make the gun shoot faster?
« Last Edit: July 27, 2008, 09:05:33 PM by Talos »


Offline gameroms

  • Granny Spanker
  • *
  • Posts: 376
  • Post quality +3/-0
Re: New Rapid Fire Method (No Chip)
« Reply #11 on: July 27, 2008, 09:44:16 PM »
i will say some kits shoot faster than others, on ebay.

but i have not compared this yet.

Offline Nemesis

  • Millennium Poster
  • *
  • Posts: 1186
  • Post quality +0/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #12 on: July 28, 2008, 02:23:02 AM »
HELL NO! no way..no way..no way, wtf? seriously thats it? i really cannot believe this, after spending a whole load of cash on parts for different methods of rapid fire all i needed was this? this is amazing. im just astonished....thanks so much







Offline zbblanton

  • Acid Modder
  • *
  • Posts: 979
  • Post quality +5/-0
  • Gender: Male
    • My modding site
Re: New Rapid Fire Method (No Chip)
« Reply #13 on: July 28, 2008, 02:42:45 AM »
so how exacly does this work?

does the led just pulse so fast we can see it?

Offline Luke

  • E = MC² Mad Scientist
  • *
  • Posts: 1923
  • Post quality +12/-0
  • Gender: Male
  • ..
Re: New Rapid Fire Method (No Chip)
« Reply #14 on: July 28, 2008, 03:17:03 AM »
what type of led is that can i get a close picture?

Offline Nemesis

  • Millennium Poster
  • *
  • Posts: 1186
  • Post quality +0/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #15 on: July 28, 2008, 03:44:21 AM »
what type of led is that can i get a close picture?

its no special type of led from what i can see, its just wired to the led on the board used to show which controller number it is

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: New Rapid Fire Method (No Chip)
« Reply #16 on: July 28, 2008, 05:48:18 AM »
wtf i knew of this for a while hmmm

PINOY AKO

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #17 on: July 28, 2008, 05:50:08 AM »
wtf i knew of this for a while hmmm

So did we

New Rapid Fire Method (No Chip)
« on: April 02, 2008, 10:13:39 pm »

Offline ifrgtmyname

  • ½ Pint
  • *
  • Posts: 35
  • Post quality +0/-0
Re: New Rapid Fire Method (No Chip)
« Reply #18 on: July 28, 2008, 06:33:55 AM »
You lot truley are the best in the business and I am glad you have gone for the open source approach. Just one thing I don't get: where have you soldered the wire onto the LED? on the video it just doesn't show the second wire (or at least not that I can see) anyways I have a spare controller so i'll give this a go :).

thanks again

great work  :tup: :tup: :tup: :tup:
« Last Edit: July 28, 2008, 07:03:46 AM by ifrgtmyname »

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: New Rapid Fire Method (No Chip)
« Reply #19 on: July 28, 2008, 06:44:08 AM »
this is a brillant mod guys! Nice way to stick it to the ebayers! i might have to mod my mates controller (i don't have a xbox 360, more sony guy, lol)  :tup:

Offline DarkHawken

  • Ω Allumnist Ω
  • *
  • Posts: 127
  • Post quality +0/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #20 on: July 28, 2008, 07:25:02 AM »
whats the difference between rapid fire and spit fire?

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #21 on: July 28, 2008, 07:33:12 AM »
whats the difference between rapid fire and spit fire?

Spit fire you can write combo's to the buttons like (X,X,Y,B,A,X)

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #22 on: July 28, 2008, 07:34:55 AM »
You lot truley are the best in the business and I am glad you have gone for the open source approach. Just one thing I don't get: where have you soldered the wire onto the LED? on the video it just doesn't show the second wire (or at least not that I can see) anyways I have a spare controller so i'll give this a go :).

thanks again

great work  :tup: :tup: :tup: :tup:

Solder to the ground side of the LED to point on the far left..

Offline kink192

  • Acid Modder
  • *
  • Posts: 916
  • Post quality +1/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #23 on: July 28, 2008, 08:25:38 AM »
i still dont see how this is possible, please just tell me, does the led ground pulse at all? thats the only way this would make sense to me...please answer so i can get some sleep tonight lol
It's been a long time

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #24 on: July 28, 2008, 08:32:49 AM »
i still dont see how this is possible, please just tell me, does the led ground pulse at all? thats the only way this would make sense to me...please answer so i can get some sleep tonight lol

are you familure with PWM (Pulse Width Modulation)?

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #25 on: July 28, 2008, 08:55:40 AM »
Nope. What's it do? o_o

Offline ifrgtmyname

  • ½ Pint
  • *
  • Posts: 35
  • Post quality +0/-0
Re: New Rapid Fire Method (No Chip)
« Reply #26 on: July 28, 2008, 09:00:49 AM »
hmmm, I just broke a good controller, and then the working bit of a bad one :laughing: oh well, neither were complete controllers...

I just cant seem to be able to solder onto the LED, first time was with a 016 model and the LED dropped off during soldering, second time was with a 026 model where the LED was easy to solder to but the LED stopped working...

any advice?

thanks

Offline TaSlAyEr

  • E = MC²
  • *
  • Posts: 342
  • Post quality +0/-0
  • Gender: Male
  • i has a shovel lolz
Re: New Rapid Fire Method (No Chip)
« Reply #27 on: July 28, 2008, 09:02:54 AM »
nice shi- i have to say WOW IT WAS THAT SIMPLE AWWW SHI-

Offline KingMike_OS

  • Shop Owner - Products & Support
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 929
  • Post quality +14/-0
  • Gender: Male
  • R&D
    • Modding Shop At the end of the Universe
Re: New Rapid Fire Method (No Chip)
« Reply #28 on: July 28, 2008, 09:16:48 AM »
yes to solder to the led you want to do it fast. now if hold the solder there too much it will take the casing of the led and will burn out on the next power on.

they way i do it get your wire and dip it in flux also have just a bit soder on the tip of your iron already ..

and all you do hold the wire with the flux at the end next to the led touch the led and wire with
your iron with just a bit soder on it and walah that's it.

you shoud not fight with it it should take in just a sec thats it.

« Last Edit: July 28, 2008, 09:18:38 AM by KingMike_OS »

Offline ifrgtmyname

  • ½ Pint
  • *
  • Posts: 35
  • Post quality +0/-0
Re: New Rapid Fire Method (No Chip)
« Reply #29 on: July 28, 2008, 09:21:05 AM »
yes to solder to the led you want to do it fast. now if hold the solder there too much it will take the casing of the led and will burn out on the next power on.

they way i do it get your wire and dip it in flux also have just a bit soder on the tip of your iron already ..

and all you do hold the wire with the flux at the end next to the led touch the led and wire with
your iron with just a bit soder on it and walah that's it.

you shoud not fight with it it should take in just a sec thats it.



thanks for the advice, i'll give that a go now, I was suprised when the LED broke the second time though because i literally touched the LED for a second.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal