Author Topic: Rapid Fire Method (No Chip)  (Read 369851 times)

Offline mvpsean

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: New Rapid Fire Method (No Chip)
« Reply #570 on: June 19, 2009, 08:58:44 AM »
Hey guys. Excellent site you have and thanks for all your hardwork. I have an interesting problem. I am trying to make a rapidfire controller to use with COD WAW. I have followed all the instructions, I have the matrix type, etc, etc. I decided that I would manually test this out before I started soldering and I ran into a problem. The gun will only rapidfire for the first time I shoot in any round online. Even more interesting, on automatic guns with large clips, it will make them fire fast for about 1 second and then the gun just slowly releases one bullet at a time. I cannot even release 1 bullet at a time with the gun with my own finger.

My only reasoning is that I have bad wiring? I bought new stuff though and it works the first time in every round, then I have to restart the round to get it to work the first time again.

Any ideas? Thanks.
« Last Edit: June 19, 2009, 10:11:49 AM by mvpsean »

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #571 on: June 20, 2009, 01:54:08 PM »
welcome to acidmods sean, there is nothing wrong with you work. the mod you have completed is working exactly as designed, its the game that has a problem, what is happening is a patch for the game released by treyarch to stop rapid fire controllers in WAW. you will notice that your resoults will be different in another game. the only way to use rapid fire in WAW is through precice timming and this must be done using a programed chip. 

Offline KRAY0N

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: New Rapid Fire Method (No Chip)
« Reply #572 on: June 20, 2009, 05:41:40 PM »
Whats a good rapid fire mod to use online?

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #573 on: June 20, 2009, 05:52:27 PM »
for cod4 the opensource code here will do a nice job.. for waw I have yet to see one LOL

Offline Ghost In Black

  • Chaos Lover
  • *
  • Posts: 258
  • Post quality +0/-0
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #574 on: June 20, 2009, 07:04:46 PM »
If you play WaW mostly then the best you can do is basically not even bother making a mod. You have to set the fire rate really slow; you can probably pull faster with your finger.
If you want, you can take the time to learn C++ or Assembly and write your own code for CoW: WaW using a pic chip, but that takes time and practice.

Offline DeadlyInstinct

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: New Rapid Fire Method (No Chip)
« Reply #575 on: June 21, 2009, 02:04:24 PM »
just wanted to be clear - i have the matrix model:


Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #576 on: June 21, 2009, 03:02:08 PM »
as long as you have the matrix controller that will work for cod4 with mid ranged battery life.

Offline mvpsean

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: New Rapid Fire Method (No Chip)
« Reply #577 on: June 22, 2009, 07:42:27 AM »
Thanks Matt, I figured it had something to do with the patch but I wanted to double check. Even though the patch screwed it up, it was pretty fun anyways. (First hardware mod)

Offline DaaaNkIzPr0

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Acidmods User
Re: New Rapid Fire Method (No Chip)
« Reply #578 on: July 02, 2009, 07:15:10 AM »
I know I have the matrix style controller but I'm not sure if I have a resistor or not? Inside of the battery hole to the bottom left it says TP3. Am I in the clear or do I have the wrong controller for this?

Offline johnlib

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: New Rapid Fire Method (No Chip)
« Reply #579 on: July 03, 2009, 05:52:37 AM »
:drunk: 
LOOK FELLAS, I have been reading the posts for a while now and it seems people are having problems and issues with wiring the momentary switch to the LED or the other "reds" on the board. Well I am going to tell you the easiest way to do it. DO NOT even mess with the LED or any other place on the board!  Follow these easy steps.
1) Go to radio shack and buy a momentary switch, and nothing else.
2) dismantle the controller that you would like to use
3) remove the right rumble (as you are looking at it as it is sitting on a table with the back up)
4) cut the wires off of the rumble
5) cut the plug off of the rumble wires
6) solder those wires on to the momentary switch
7) drill a hole where the rumble was, and mount the switch
8) take one of the wires from one side of the momentary switch, and solder to the middle prong on the trigger (just like everyone else does)
9) SOLDER THE OTHER WIRE FROM THE MOMENTARY SWITCH TO THE BOARD WHERE THE RED FROM THE RUMBLE PLUG GOES THROUGH THE BOARD! (if you solder it to the black side nothing will happen when you test it. It will shoot normal. No big deal remove solder and solder to the other prong.)
10) test
11) reassemble controller and enjoy.

If you want, you can just mail me some money as props! LOL :clap: :hifive:


There you go its that simple and it will cost you a whopping......................... $2.00 !!!!!!
Hi Im Fairly new to this and i just had one question
9) SOLDER THE OTHER WIRE FROM THE MOMENTARY SWITCH TO THE BOARD WHERE THE RED FROM THE RUMBLE PLUG GOES THROUGH THE BOARD!
do i rip out the white thing that holds the rumble wires in place or do i solder the wire onto the little pin on the inside of that?
a picture could help i can't watch videos with this computer.
thank you

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #580 on: July 03, 2009, 06:10:44 AM »
just solder it to the red wire, or the top of the pin, I would not rip it out

Offline johnlib

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: New Rapid Fire Method (No Chip)
« Reply #581 on: July 03, 2009, 04:59:37 PM »
ahh i see after re reading the directions i now understand. thanks for clearing that up matt.
i will try this out once i find my soldering stuff.


edit: well this was my first attempt to solder anything. Its a semi-working. i have only had time to test it with a full battery and with that only my pistols will rapid fire but my primary guns fire at a slower rate. hopefully it works when the battery is a little drained.
im just glad i have learned to solder and it worked!
« Last Edit: July 04, 2009, 09:29:39 PM by johnlib »

Offline Gamer224

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Acidmods User
Re: New Rapid Fire Method (No Chip)
« Reply #582 on: July 27, 2009, 11:00:37 AM »
Does it only work on the tp3 controllers

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #583 on: July 27, 2009, 11:31:34 AM »
It only works on the old wireless controllers.

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: New Rapid Fire Method (No Chip)
« Reply #584 on: July 27, 2009, 02:27:24 PM »
as kicks stated, I dont know where the tp3 type came from, but thismod only works on MATRIX style controllers. look here to see if you have a matrix controller.
https://www.acidmods.com/forum/index.php?topic=24699.0

Offline deathshells

  • Chief squatting Hard
  • *
  • Posts: 20
  • Post quality +0/-0
  • Gender: Male
  • Certified Fur:censored:
Re: New Rapid Fire Method (No Chip)
« Reply #585 on: October 01, 2009, 06:01:51 PM »
... WIN! lol i tried using this, tis very useful and i certainly benefited from it... new of it loooong back but my soldering skills were bad then and it kept coming undone for some reason... just replaced e 4 led's in the ring of light on the controller... at 1.45 in the morning. god im so tired! :tup:  :rofl:
If everything is going well, you've probably overlooked something.

Offline JustWerkIt

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Gender: Male
  • Newcomer
Re: New Rapid Fire Method (No Chip)
« Reply #586 on: October 04, 2009, 01:54:13 AM »
Great mod. Now i feel stupid for spending $20 on supplies for the 555 rapid fire for my other controller

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: New Rapid Fire Method (No Chip)
« Reply #587 on: October 04, 2009, 02:39:32 AM »
don't worry your money is not wasted the 555 method is much better than this one, plus you can vary the fire rate.
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline mastapsp

  • Ω Allumnist Ω
  • *
  • Posts: 102
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Rapid Fire Method (No Chip)
« Reply #588 on: August 09, 2010, 08:11:16 PM »
next time don't post something like this, too many people cant accept reality and are too amazed by something simple.
folks: your reactions to this show your stupidity.

Offline hoboman965

  • www.youtube.com/hoboman965
  • Registered BST
  • ½ Pint
  • *
  • Posts: 31
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
    • MY YOUTUBE CHANNEL, PLEASE CHECK IT OUT!
Re: Rapid Fire Method (No Chip)
« Reply #589 on: January 26, 2011, 08:50:53 AM »
I just found this site, and made an account just for this. I am planning to do this to my and many of my friends controllers. I have all the supplies already, and have figured out how to check if they are new or old wireless. I just have some questions that i would really like to get answered.
1. Does this mod only work with the old Matrix and CG, or just Matrix?
2. Did anyone figure out/ find a way to achieve rapid fire mod with a new wireless?
3. If there are any other things/ updated things on this subject please tell me, as im an very new and uninformed.

Thank you all for your time.

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Rapid Fire Method (No Chip)
« Reply #590 on: January 26, 2011, 10:50:49 AM »
first off welcome to acidmods. u have come to the right place. this topic is very old and outdated. but i can still help you.

to answer your questions:
1 only matrix
2 yes there a few free options and more paid options. i can show you both
3 see 2 lol


in order to have rapidfire for all controllers you need to use either a 555 timer circuit or a programed microcontroller. but please don't let this scare you off. they are both easy to learn and there are tutorials on this sit that will help.'


i suggest for best results create your own new thread and ask for help with rapid fire. that way it will be specific to your needs and i/we can help you more personably.

we have a lot of great people here egar to help. acidmods i a great online community as well as resource.

thread closed.
« Last Edit: January 27, 2015, 12:31:39 PM by laxboy »

Offline Bruno

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Rapid Fire Method (No Chip)
« Reply #591 on: December 11, 2014, 04:54:19 AM »
Is it possible to be done with the "B" button? How?

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: Rapid Fire Method (No Chip)
« Reply #592 on: January 27, 2015, 01:04:31 AM »
Anything is possible as long as its programmed and set up correctly to specs.

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Rapid Fire Method (No Chip)
« Reply #593 on: January 27, 2015, 12:45:19 PM »
LOL this is older than alot of our users.... thread locked.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal