Author Topic: Razor X in Slim By LordNico..  (Read 102284 times)

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Razor X in Slim By LordNico..
« on: March 30, 2008, 02:04:45 PM »
Hey all, here is L0rdNic0's PSP Slim with Dual Nubs. The wiring to the header pins is a little hard, but the over all installation is cake. The RazorX adds smooth operation since there are no bubbles of solder or wires to interfere with the spring. We here at AcidMods will be working on a no hassel way of installing the RazorX in the Slim that will include a relocation of the power switch to the Start button using a digital switch as posted in one of my other videos. Keep an eye out. NOTE: This install is 100% fully functioning without any issues.

here is a video of it in action..




Here is a sneek peek of the inside of the slim with the razor X in place.


Here is the Razor X with the face plate on..

« Last Edit: March 30, 2008, 02:26:28 PM by Cyberpyrot »

Offline anthonyta

  • MFH
  • Granny Spanker
  • *
  • Posts: 422
  • Post quality +1/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #1 on: March 30, 2008, 02:15:25 PM »
clllleeeeaaannnnn omggg im jealous. i dont like the spring though i always end up bending it. check out my balloon one in the dual nub section =]

Offline Nemesis

  • Millennium Poster
  • *
  • Posts: 1186
  • Post quality +0/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #2 on: March 30, 2008, 02:57:11 PM »
awesome, did the charging port have to be removed?

Offline l0rdnic0

  • 2%
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1836
  • Post quality +8/-0
  • Gender: Male
  • TeamCYBER

Re: Razor X in Slim By LordNico..
« Reply #3 on: March 30, 2008, 03:07:19 PM »
Special thanks to Cyber for editing my video footage for me.  Hope you guys like the Video and sorry that my PSP trim looks shabby I use that PSP everyday as an MP3 player and TV   :winker:

Details, yes the Charging port needs to be removed and the power board too. At the time of this video recording, I had not installed the electronic switch, but now to turn the PSP on and off you need to hold the start button down for five seconds. Ten seconds to hard boot it, or use a magnet (love the security mod). Some time ago I had done the USB Mod so I didn't have to use Sony's charging method (this was before DAX created a Hack in CFW). Anyway now I can charge my slim even when its powered off so I guess it works out.. BTW the spring is easy to work with, just takes practice.


 :#1:
« Last Edit: March 30, 2008, 05:10:32 PM by l0rdnic0 »


L0rdNiC0 Pioneering Mods on the PSP Slim :taunt:
Sound Mod, Button LED Mod, Security Mod, Dual NUB, Mode Select Switch + More

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: Razor X in Slim By LordNico..
« Reply #4 on: March 30, 2008, 04:10:07 PM »
Ghost in the shell...

Same game the A2D was shown on...

Ahh... Memories.

Anyway, this looks amazing, once you do a ribbon cable version i'll buy.
Retired Modder, minor dabbling from now on :P

Offline noah03ark

  • E = MC² Mad Scientist
  • *
  • Posts: 1807
  • Post quality +1/-0
  • Gender: Male
  • Überm Sternenzelt richtet Gott, wie wir gerichtet
Re: Razor X in Slim By LordNico..
« Reply #5 on: March 30, 2008, 07:21:22 PM »
holy crap that is aweosme! wonderful work!!!!

theres a psp phat ribbon cable in the works too...right?

Offline l0rdnic0

  • 2%
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1836
  • Post quality +8/-0
  • Gender: Male
  • TeamCYBER

Re: Razor X in Slim By LordNico..
« Reply #6 on: March 30, 2008, 07:41:27 PM »
no, no need for a Phat the contact points are easy to solder to. The PSP Slim is a different story but we dont want to give away to many details just yet.


L0rdNiC0 Pioneering Mods on the PSP Slim :taunt:
Sound Mod, Button LED Mod, Security Mod, Dual NUB, Mode Select Switch + More

Offline Skullmaster

  • God Of Cars
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1520
  • Post quality +1/-0
  • Gender: Male
  • Admin Force, Co-Owner Wanna-be
    • Acidmods
Re: Razor X in Slim By LordNico..
« Reply #7 on: March 30, 2008, 08:13:18 PM »
Cool! I cant wait for a kit, I dont trust my skills that much to do it on my own :p

Offline Electro

  • E = MC²
  • *
  • Posts: 315
  • Post quality +8/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #8 on: March 30, 2008, 08:42:44 PM »
Nice, good work the installations looks nice and clean.

2 bad I don't wanna mod my Slim
But as for my Fat PSP I might have to do something like this again.

Offline nez

  • Granny Spanker
  • *
  • Posts: 516
  • Post quality +0/-0
  • Gender: Male
  • Pirate For Life
    • 13xic0n administrator\owner
Re: Razor X in Slim By LordNico..
« Reply #9 on: March 30, 2008, 11:06:06 PM »
very clean as normal. i like it a lot but i will wait to see what is to come with the parst taken out. and the PCB Part.


Offline anthonyta

  • MFH
  • Granny Spanker
  • *
  • Posts: 422
  • Post quality +1/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #10 on: March 31, 2008, 12:22:39 AM »
hey what did you use for the spring cage? it doesn't look like the psp phat's analogue. its a perfect circle

Offline Siggen

  • Ω Allumnist Ω
  • *
  • Posts: 106
  • Post quality +0/-0
  • Gender: Male
    • FileSock.Sourceforge.net
Re: Razor X in Slim By LordNico..
« Reply #11 on: March 31, 2008, 02:02:05 AM »
cool, will you sell this mod later? cos i would do it my self on the phat and all, but i dont even want to open my slim (my precious).  Or maybe someone (hobby) professionals in england rather (since i live in norway). I thought i never would want to mod my slim, but you changed my mind Nico :)

but since the mod is not really ready for the public yet suits me okay, cos living on my own is hard enough, need to save up some moneys :cool:

Tech Support Crew at The Gathering 08 (worlds second biggest LAN party)

Offline Luke

  • E = MC² Mad Scientist
  • *
  • Posts: 1923
  • Post quality +12/-0
  • Gender: Male
  • ..
Re: Razor X in Slim By LordNico..
« Reply #12 on: March 31, 2008, 04:38:50 AM »
can i steal this kids brain so im as smart as him xD

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: Razor X in Slim By LordNico..
« Reply #13 on: March 31, 2008, 06:07:02 AM »
nice l0rdnic0 very nice!!!!!



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

ccccpie

  • Guest
Re: Razor X in Slim By LordNico..
« Reply #14 on: March 31, 2008, 01:55:19 PM »
can i steal this kids brain so im as smart as him



He isnt exactly a kid :p
« Last Edit: March 31, 2008, 02:03:32 PM by l0rdnic0 »

Offline General Vergel

  • Chief squatting Hard
  • *
  • Posts: 27
  • Post quality +0/-0
  • Gender: Male
    • Myspace
Re: Razor X in Slim By LordNico..
« Reply #15 on: April 01, 2008, 08:36:37 AM »
omg so awesome  :clap: :dribble:

Offline JoblessPunk

  • King of the Wii-tards
  • *
  • Posts: 146
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #16 on: April 02, 2008, 07:50:57 AM »
dude!
thats sooo freakin cool!

I have a question,
On your site to buy it:
http://www.coolmods.co.uk/catalog/product_info.php?products_id=190&osCsid=1ed4d6494fd8cc645f77b4e84be23425

is that the kit for the PSP Slim?
and does that "kit" come with everything you will need + instructions?

Thanks!
JoblessPunk

Offline drchronic

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #17 on: April 03, 2008, 12:09:28 AM »
Truly amazing... how much do you think the kit will cost when you are getting the pcb manufactured? When this comes out it will make me finally fork over some $$$ for a slim. KUDOS!!!!!

Offline robin1989

  • Site Owner - Site Maintenance & development
  • Administrator
  • Mad Bomber
  • *
  • Posts: 6272
  • Post quality +21/-0
  • Gender: Male
  • Site owner
    • Acidmods
Re: Razor X in Slim By LordNico..
« Reply #18 on: April 03, 2008, 03:24:33 AM »
Truly amazing... how much do you think the kit will cost when you are getting the pcb manufactured? When this comes out it will make me finally fork over some $$$ for a slim. KUDOS!!!!!
the actual razor x board is already released at www.coomods.co.uk were just waiting on creating a tutorial for people if they need it

i am not responsible for what i do or my advice


Get the iPhone 4s from Three using Quidco and recieve £109 cashback

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: Razor X in Slim By LordNico..
« Reply #19 on: April 03, 2008, 05:04:04 AM »
dude!
thats sooo freakin cool!

I have a question,
On your site to buy it:
http://www.coolmods.co.uk/catalog/product_info.php?products_id=190&osCsid=1ed4d6494fd8cc645f77b4e84be23425

is that the kit for the PSP Slim?
and does that "kit" come with everything you will need + instructions?

Thanks!
JoblessPunk

That is just a board, you will need a Analog Nub from a PSP, Kynar, Solder, Dremel, Etc. and a tut to be released.
Retired Modder, minor dabbling from now on :P

Offline JoblessPunk

  • King of the Wii-tards
  • *
  • Posts: 146
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #20 on: April 03, 2008, 02:36:28 PM »
That is just a board, you will need a Analog Nub from a PSP, Kynar, Solder, Dremel, Etc. and a tut to be released.

Ty,
I can't wait till the tutorial is released.... just like everyone else thats seen that video! haha

Offline drchronic

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #21 on: April 03, 2008, 05:44:38 PM »
So does this have all I need (minus the tutorial)?? http://www.coolmods.co.uk/catalog/product_info.php?products_id=189

Offline Skullmaster

  • God Of Cars
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1520
  • Post quality +1/-0
  • Gender: Male
  • Admin Force, Co-Owner Wanna-be
    • Acidmods
Re: Razor X in Slim By LordNico..
« Reply #22 on: April 03, 2008, 07:08:59 PM »
no, will will need wire and other things. I suggest waiting for a tutorial, which will make this way easier  :yess:

Offline Ilzwalrus

  • Millennium Poster
  • *
  • Posts: 1120
  • Post quality +0/-0
  • Gender: Male
  • I r smart.
    • My Livejournal, which I update two to three times a day with a fun and witty commentary about the goings-on of society today, occasionally interspersed with meaningful and often thought-provoking tidbits about my extraordinary personal life.
Re: Razor X in Slim By LordNico..
« Reply #23 on: April 04, 2008, 09:43:42 AM »
One word: clean :)

Offline JoblessPunk

  • King of the Wii-tards
  • *
  • Posts: 146
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #24 on: April 04, 2008, 04:37:00 PM »
does anyone know how the tutorial is going?

Offline anthonyta

  • MFH
  • Granny Spanker
  • *
  • Posts: 422
  • Post quality +1/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #25 on: April 04, 2008, 11:33:58 PM »
im still wondering is that the slims analog top? its a perfect circle unlike the fats

Offline S.T.R.

  • Guppy
  • *
  • Posts: 7
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #26 on: April 05, 2008, 04:02:52 PM »
Ou man you are so god. I wait of a TUT.

Offline vgamer360

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 54
  • Post quality +0/-0
  • Gender: Male
  • (+[___]%)
Re: Razor X in Slim By LordNico..
« Reply #27 on: April 08, 2008, 06:44:53 AM »
I don't know if you guys knew this but looks like he got his story while back on Engadget.
http://www.engadget.com/2008/03/30/psp-slim-modded-for-dual-analog-sticks/

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male





To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

Offline vgamer360

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 54
  • Post quality +0/-0
  • Gender: Male
  • (+[___]%)

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal