Author Topic: Razor X in Slim By LordNico..  (Read 102303 times)

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Razor X in Slim By LordNico..
« on: March 30, 2008, 02:04:45 PM »
Hey all, here is L0rdNic0's PSP Slim with Dual Nubs. The wiring to the header pins is a little hard, but the over all installation is cake. The RazorX adds smooth operation since there are no bubbles of solder or wires to interfere with the spring. We here at AcidMods will be working on a no hassel way of installing the RazorX in the Slim that will include a relocation of the power switch to the Start button using a digital switch as posted in one of my other videos. Keep an eye out. NOTE: This install is 100% fully functioning without any issues.

here is a video of it in action..




Here is a sneek peek of the inside of the slim with the razor X in place.


Here is the Razor X with the face plate on..

« Last Edit: March 30, 2008, 02:26:28 PM by Cyberpyrot »

Offline anthonyta

  • MFH
  • Granny Spanker
  • *
  • Posts: 422
  • Post quality +1/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #1 on: March 30, 2008, 02:15:25 PM »
clllleeeeaaannnnn omggg im jealous. i dont like the spring though i always end up bending it. check out my balloon one in the dual nub section =]

Offline Nemesis

  • Millennium Poster
  • *
  • Posts: 1186
  • Post quality +0/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #2 on: March 30, 2008, 02:57:11 PM »
awesome, did the charging port have to be removed?

Offline l0rdnic0

  • 2%
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1836
  • Post quality +8/-0
  • Gender: Male
  • TeamCYBER

Re: Razor X in Slim By LordNico..
« Reply #3 on: March 30, 2008, 03:07:19 PM »
Special thanks to Cyber for editing my video footage for me.  Hope you guys like the Video and sorry that my PSP trim looks shabby I use that PSP everyday as an MP3 player and TV   :winker:

Details, yes the Charging port needs to be removed and the power board too. At the time of this video recording, I had not installed the electronic switch, but now to turn the PSP on and off you need to hold the start button down for five seconds. Ten seconds to hard boot it, or use a magnet (love the security mod). Some time ago I had done the USB Mod so I didn't have to use Sony's charging method (this was before DAX created a Hack in CFW). Anyway now I can charge my slim even when its powered off so I guess it works out.. BTW the spring is easy to work with, just takes practice.


 :#1:
« Last Edit: March 30, 2008, 05:10:32 PM by l0rdnic0 »


L0rdNiC0 Pioneering Mods on the PSP Slim :taunt:
Sound Mod, Button LED Mod, Security Mod, Dual NUB, Mode Select Switch + More

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: Razor X in Slim By LordNico..
« Reply #4 on: March 30, 2008, 04:10:07 PM »
Ghost in the shell...

Same game the A2D was shown on...

Ahh... Memories.

Anyway, this looks amazing, once you do a ribbon cable version i'll buy.
Retired Modder, minor dabbling from now on :P

Offline noah03ark

  • E = MC² Mad Scientist
  • *
  • Posts: 1807
  • Post quality +1/-0
  • Gender: Male
  • Überm Sternenzelt richtet Gott, wie wir gerichtet
Re: Razor X in Slim By LordNico..
« Reply #5 on: March 30, 2008, 07:21:22 PM »
holy crap that is aweosme! wonderful work!!!!

theres a psp phat ribbon cable in the works too...right?

Offline l0rdnic0

  • 2%
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1836
  • Post quality +8/-0
  • Gender: Male
  • TeamCYBER

Re: Razor X in Slim By LordNico..
« Reply #6 on: March 30, 2008, 07:41:27 PM »
no, no need for a Phat the contact points are easy to solder to. The PSP Slim is a different story but we dont want to give away to many details just yet.


L0rdNiC0 Pioneering Mods on the PSP Slim :taunt:
Sound Mod, Button LED Mod, Security Mod, Dual NUB, Mode Select Switch + More

Offline Skullmaster

  • God Of Cars
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1520
  • Post quality +1/-0
  • Gender: Male
  • Admin Force, Co-Owner Wanna-be
    • Acidmods
Re: Razor X in Slim By LordNico..
« Reply #7 on: March 30, 2008, 08:13:18 PM »
Cool! I cant wait for a kit, I dont trust my skills that much to do it on my own :p

Offline Electro

  • E = MC²
  • *
  • Posts: 315
  • Post quality +8/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #8 on: March 30, 2008, 08:42:44 PM »
Nice, good work the installations looks nice and clean.

2 bad I don't wanna mod my Slim
But as for my Fat PSP I might have to do something like this again.

Offline nez

  • Granny Spanker
  • *
  • Posts: 516
  • Post quality +0/-0
  • Gender: Male
  • Pirate For Life
    • 13xic0n administrator\owner
Re: Razor X in Slim By LordNico..
« Reply #9 on: March 30, 2008, 11:06:06 PM »
very clean as normal. i like it a lot but i will wait to see what is to come with the parst taken out. and the PCB Part.


Offline anthonyta

  • MFH
  • Granny Spanker
  • *
  • Posts: 422
  • Post quality +1/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #10 on: March 31, 2008, 12:22:39 AM »
hey what did you use for the spring cage? it doesn't look like the psp phat's analogue. its a perfect circle

Offline Siggen

  • Ω Allumnist Ω
  • *
  • Posts: 106
  • Post quality +0/-0
  • Gender: Male
    • FileSock.Sourceforge.net
Re: Razor X in Slim By LordNico..
« Reply #11 on: March 31, 2008, 02:02:05 AM »
cool, will you sell this mod later? cos i would do it my self on the phat and all, but i dont even want to open my slim (my precious).  Or maybe someone (hobby) professionals in england rather (since i live in norway). I thought i never would want to mod my slim, but you changed my mind Nico :)

but since the mod is not really ready for the public yet suits me okay, cos living on my own is hard enough, need to save up some moneys :cool:

Tech Support Crew at The Gathering 08 (worlds second biggest LAN party)

Offline Luke

  • E = MC² Mad Scientist
  • *
  • Posts: 1923
  • Post quality +12/-0
  • Gender: Male
  • ..
Re: Razor X in Slim By LordNico..
« Reply #12 on: March 31, 2008, 04:38:50 AM »
can i steal this kids brain so im as smart as him xD

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: Razor X in Slim By LordNico..
« Reply #13 on: March 31, 2008, 06:07:02 AM »
nice l0rdnic0 very nice!!!!!



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

ccccpie

  • Guest
Re: Razor X in Slim By LordNico..
« Reply #14 on: March 31, 2008, 01:55:19 PM »
can i steal this kids brain so im as smart as him



He isnt exactly a kid :p
« Last Edit: March 31, 2008, 02:03:32 PM by l0rdnic0 »

Offline General Vergel

  • Chief squatting Hard
  • *
  • Posts: 27
  • Post quality +0/-0
  • Gender: Male
    • Myspace
Re: Razor X in Slim By LordNico..
« Reply #15 on: April 01, 2008, 08:36:37 AM »
omg so awesome  :clap: :dribble:

Offline JoblessPunk

  • King of the Wii-tards
  • *
  • Posts: 146
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #16 on: April 02, 2008, 07:50:57 AM »
dude!
thats sooo freakin cool!

I have a question,
On your site to buy it:
http://www.coolmods.co.uk/catalog/product_info.php?products_id=190&osCsid=1ed4d6494fd8cc645f77b4e84be23425

is that the kit for the PSP Slim?
and does that "kit" come with everything you will need + instructions?

Thanks!
JoblessPunk

Offline drchronic

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #17 on: April 03, 2008, 12:09:28 AM »
Truly amazing... how much do you think the kit will cost when you are getting the pcb manufactured? When this comes out it will make me finally fork over some $$$ for a slim. KUDOS!!!!!

Offline robin1989

  • Site Owner - Site Maintenance & development
  • Administrator
  • Mad Bomber
  • *
  • Posts: 6272
  • Post quality +21/-0
  • Gender: Male
  • Site owner
    • Acidmods
Re: Razor X in Slim By LordNico..
« Reply #18 on: April 03, 2008, 03:24:33 AM »
Truly amazing... how much do you think the kit will cost when you are getting the pcb manufactured? When this comes out it will make me finally fork over some $$$ for a slim. KUDOS!!!!!
the actual razor x board is already released at www.coomods.co.uk were just waiting on creating a tutorial for people if they need it

i am not responsible for what i do or my advice


Get the iPhone 4s from Three using Quidco and recieve £109 cashback

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: Razor X in Slim By LordNico..
« Reply #19 on: April 03, 2008, 05:04:04 AM »
dude!
thats sooo freakin cool!

I have a question,
On your site to buy it:
http://www.coolmods.co.uk/catalog/product_info.php?products_id=190&osCsid=1ed4d6494fd8cc645f77b4e84be23425

is that the kit for the PSP Slim?
and does that "kit" come with everything you will need + instructions?

Thanks!
JoblessPunk

That is just a board, you will need a Analog Nub from a PSP, Kynar, Solder, Dremel, Etc. and a tut to be released.
Retired Modder, minor dabbling from now on :P

Offline JoblessPunk

  • King of the Wii-tards
  • *
  • Posts: 146
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #20 on: April 03, 2008, 02:36:28 PM »
That is just a board, you will need a Analog Nub from a PSP, Kynar, Solder, Dremel, Etc. and a tut to be released.

Ty,
I can't wait till the tutorial is released.... just like everyone else thats seen that video! haha

Offline drchronic

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #21 on: April 03, 2008, 05:44:38 PM »
So does this have all I need (minus the tutorial)?? http://www.coolmods.co.uk/catalog/product_info.php?products_id=189

Offline Skullmaster

  • God Of Cars
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1520
  • Post quality +1/-0
  • Gender: Male
  • Admin Force, Co-Owner Wanna-be
    • Acidmods
Re: Razor X in Slim By LordNico..
« Reply #22 on: April 03, 2008, 07:08:59 PM »
no, will will need wire and other things. I suggest waiting for a tutorial, which will make this way easier  :yess:

Offline Ilzwalrus

  • Millennium Poster
  • *
  • Posts: 1120
  • Post quality +0/-0
  • Gender: Male
  • I r smart.
    • My Livejournal, which I update two to three times a day with a fun and witty commentary about the goings-on of society today, occasionally interspersed with meaningful and often thought-provoking tidbits about my extraordinary personal life.
Re: Razor X in Slim By LordNico..
« Reply #23 on: April 04, 2008, 09:43:42 AM »
One word: clean :)

Offline JoblessPunk

  • King of the Wii-tards
  • *
  • Posts: 146
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #24 on: April 04, 2008, 04:37:00 PM »
does anyone know how the tutorial is going?

Offline anthonyta

  • MFH
  • Granny Spanker
  • *
  • Posts: 422
  • Post quality +1/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #25 on: April 04, 2008, 11:33:58 PM »
im still wondering is that the slims analog top? its a perfect circle unlike the fats

Offline S.T.R.

  • Guppy
  • *
  • Posts: 7
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #26 on: April 05, 2008, 04:02:52 PM »
Ou man you are so god. I wait of a TUT.

Offline vgamer360

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 54
  • Post quality +0/-0
  • Gender: Male
  • (+[___]%)
Re: Razor X in Slim By LordNico..
« Reply #27 on: April 08, 2008, 06:44:53 AM »
I don't know if you guys knew this but looks like he got his story while back on Engadget.
http://www.engadget.com/2008/03/30/psp-slim-modded-for-dual-analog-sticks/

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male





To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

Offline vgamer360

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 54
  • Post quality +0/-0
  • Gender: Male
  • (+[___]%)

Offline shload

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #30 on: April 08, 2008, 12:35:37 PM »
Hey everyone, I just got my razor X in the mail.  I'm pretty sure i can mod my phat and get this installed, but if there were a tut on the way i may be able to hold off and wait.  any idea on a time frame for the tut?  will there be a tut for the Fat as well as the slim?

Cheers

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #31 on: April 08, 2008, 04:41:17 PM »
Hey everyone, I just got my razor X in the mail.  I'm pretty sure i can mod my phat and get this installed, but if there were a tut on the way i may be able to hold off and wait.  any idea on a time frame for the tut?  will there be a tut for the Fat as well as the slim?

Cheers

Working on it :D

Offline JoblessPunk

  • King of the Wii-tards
  • *
  • Posts: 146
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #32 on: April 09, 2008, 01:25:04 AM »
Working on it :D


yay!

The tut is going to be for the slim...right?

Offline S.T.R.

  • Guppy
  • *
  • Posts: 7
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #33 on: April 09, 2008, 05:57:39 AM »
When you release the TUT ?
I wait xD.

Offline i22foosh

  • Granny Spanker
  • *
  • Posts: 469
  • Post quality +0/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #34 on: April 09, 2008, 05:08:19 PM »
is the razor x and razor 2 just differant because the razor x is easier to install?
having a higher post count doesn't earn respect in the forums, quality posts do.

thanks,

deda and reaper

Offline S.T.R.

  • Guppy
  • *
  • Posts: 7
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #35 on: April 17, 2008, 02:26:01 PM »
And how long we must wait ?  :dribble:

Offline nez

  • Granny Spanker
  • *
  • Posts: 516
  • Post quality +0/-0
  • Gender: Male
  • Pirate For Life
    • 13xic0n administrator\owner
Re: Razor X in Slim By LordNico..
« Reply #36 on: April 17, 2008, 07:19:09 PM »
longer then you have. just be patient and it will come ot sooner or later but just wait asking all the time only slows down the process.


Offline JoblessPunk

  • King of the Wii-tards
  • *
  • Posts: 146
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #37 on: April 29, 2008, 02:12:59 PM »
wow.
20066 views.

either hella people are waiting for this tut or its just 5 people that check this thread every hour  :w00t:

Offline Buddy

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #38 on: May 17, 2008, 05:11:31 PM »
U are the best!!  :clap:

P.s. Can i know the name of the song pls?

Offline laohor

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #39 on: May 25, 2008, 03:02:37 AM »
psp phat and psp slim dual nub tutorial all not released???

Offline sniper07

  • Fart Sniffer
  • *
  • Posts: 43
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #40 on: May 28, 2008, 01:08:09 PM »
Awesome work guys, acidmods FTW.
Tut would be super. ;D

Offline celph_titled

  • Chief squatting Hard
  • *
  • Posts: 18
  • Post quality +0/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #41 on: June 03, 2008, 01:08:46 PM »
God this tutorial is taking forever!
(+.[FAT]%) 1.50  to play crisis core. Brick well updating to 3.73 (+.[SAD]%) Pandora 3.71 m33 (+.[YES]%) 3.71 m33 -2> 3.71 m33-3> 3.80 m33> 3.80 m33-2> 3.80 m33-5> 3.90 m33> 3.90 m33-2> 3.90 m33-3 install time machine v.01 and went back to 1.50

Offline Dark_Daniel

  • Ω Allumnist Ω
  • *
  • Posts: 106
  • Post quality +0/-0
  • Gender: Male
  • Teach Me how to Mod
Re: Razor X in Slim By LordNico..
« Reply #42 on: June 16, 2008, 03:34:15 PM »
Okay its been long enoughwhen do we get our tutorial why not a video mutch mutch easier
hi:)

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #43 on: June 16, 2008, 06:25:08 PM »
K don't yell if the answer's obvious, since I don't play that many fps, but how does remapping the X[]/\O buttons to the second analog nub help you move your screen around? I thought the X[]/\O buttons are generally used for stuff like jumping, reloading, etc. etc.... or am I missing something here?

Sig by Kenshinffx - Thanks!

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: Razor X in Slim By LordNico..
« Reply #44 on: June 16, 2008, 06:46:05 PM »
no in fps the  X[]/\O buttons are used for AIMING the gun, most of the time the dpad is used for reloading and the sort

Offline ShogoFPS

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #45 on: August 11, 2008, 12:58:11 AM »
Great item i love that there is a kit for front or full case with it included, less the actual stick. But in my past hour of searching and fidguring out exactly what this mod does i feel the need to ask why not make it better?  Espically if one is expected to drop 10-30 euro for this kit. I have just a sudjestion i suppose. I recall playing most all my ps1 / ps2 / ps3 games shooters and all with right joy and left directionals. I understand wanting to map the buttons for use with psp fps, but why not take it another step add a button or switch with some simple wiring and map it so one can toggle the use of that new 3rd stick.  For example a toggle switch to swap between what part its mirroring, between the X O etc buttons, push toggle button and switch to mirroring the directional buttons, push it agin and it mirrors the left analog.  I also understand that this could be difficult to mirror the left analog but it would be worth fidguring out wouldnt it? =P

Please think about it, it would rock for manny more games if it had this functionability. =)

[edit]
Dont know forsure but from the image of the analog sticks bottom view ( http://www.dealextreme.com/details.dx/sku.10648 ), seems like it could possibly be straight 4 direction wiring neway.  :dntknw:
« Last Edit: August 11, 2008, 01:33:11 AM by ShogoFPS »

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: Razor X in Slim By LordNico..
« Reply #46 on: August 11, 2008, 06:59:48 AM »
that's not the analog stick you use, you use the one for the orignal phat

Offline ShogoFPS

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #47 on: August 11, 2008, 03:10:16 PM »
http://www.dealextreme.com/details.dx/sku.3373           bottoms wiring connections look pritty similar. but so what if the image i posted isnt the exact one used.   point be both seem to have 4 points.. would lead me to belive shiny silver = ground and the 4 points are on off switches for up down left right.. but i dunno(i belive i said that before). But the guy whos making the kit surely knows the interworking of it. point being... its possible... why not do it?

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: Razor X in Slim By LordNico..
« Reply #48 on: August 11, 2008, 03:17:06 PM »
No the razor is used to make it digital and convert it so it can read the powerboard.

If it was that easy why would we invent the razor??

Offline dizzy_chicken

  • Chief squatting Hard
  • *
  • Posts: 23
  • Post quality +0/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #49 on: October 12, 2008, 04:59:00 PM »
has the tutorial for this been released yet/?

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: Razor X in Slim By LordNico..
« Reply #50 on: October 12, 2008, 05:08:26 PM »
Its not done yet..

Offline hadies6

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #51 on: October 24, 2008, 04:33:43 AM »
wow this mod is great  :tup: will this board work with a psp phat joystick or does the joystick half to be from a slim?

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: Razor X in Slim By LordNico..
« Reply #52 on: October 24, 2008, 05:25:53 AM »
wow this mod is great  :tup: will this board work with a psp phat joystick or does the joystick half to be from a slim?

No, use the top part of a phat analog, it will fit better that i'm aware of.

Offline hadies6

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #53 on: October 24, 2008, 12:34:16 PM »
so u need to use the guts from the slim joystick, and the joystick housing from the phat?

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: Razor X in Slim By LordNico..
« Reply #54 on: October 24, 2008, 03:18:08 PM »
no

just the razor board
phat top part of the joystick (which includes the spring, top plastic part, and the analog nub and the thing that the nub itself attaches too)



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

Offline hadies6

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #55 on: October 28, 2008, 09:09:08 PM »
why is shipping on the razor x board $13 for a piece that is smaller then a letter. can't it simple mailed in a letter? for a fraction of the cost i want the part but it is a total of $37 with shipping this just seems high don't you think?

Offline alx_skater

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
Re: Razor X in Slim By LordNico..
« Reply #56 on: December 17, 2008, 03:52:07 AM »
Hello, im new here.
I want to ask how i should sold the 4 pins that have the analog stick of the psp slim. is the only thing i dont know how to do. what of these 4 pins are up down left right (triangle, X, [] and circle)
thanks

Offline treemty

  • l,,l METAL l,,l
  • Millennium Poster
  • *
  • Posts: 1231
  • Post quality +1/-0
  • Gender: Male
  • Will mod for food
    • the1337group.com
Re: Razor X in Slim By LordNico..
« Reply #57 on: December 17, 2008, 04:13:57 AM »
Hello, im new here.
I want to ask how i should sold the 4 pins that have the analog stick of the psp slim. is the only thing i dont know how to do. what of these 4 pins are up down left right (triangle, X, [] and circle)
thanks
please dont bump an old topic

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: Razor X in Slim By LordNico..
« Reply #58 on: December 17, 2008, 12:52:05 PM »
Hello, im new here.
I want to ask how i should sold the 4 pins that have the analog stick of the psp slim. is the only thing i dont know how to do. what of these 4 pins are up down left right (triangle, X, [] and circle)
thanks
Look here: https://www.acidmods.com/forum/index.php?topic=25820.0
And make a new thread with these question, or even better, USE SEARCH! Don't bump old topics like treemty said.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal